[V15,0/4] Add PWM support for IPQ chipsets

Message ID 20231005160550.2423075-1-quic_devipriy@quicinc.com
Headers
Series Add PWM support for IPQ chipsets |

Message

Devi Priya Oct. 5, 2023, 4:05 p.m. UTC
  Add PWM driver and binding support for IPQ chipsets.
Also, add support for pwm node in ipq6018.

V15:
Detailed Change logs are added to the respective patches.

V14 can be found at:
https://lore.kernel.org/linux-arm-msm/20231005043127.2690639-1-quic_devipriy@quicinc.com/

Devi Priya (4):
  pwm: driver for qualcomm ipq6018 pwm block
  dt-bindings: pwm: add IPQ6018 binding
  dt-bindings: mfd: qcom,tcsr: Add simple-mfd support for IPQ6018
  arm64: dts: qcom: ipq6018: add pwm node

 .../devicetree/bindings/mfd/qcom,tcsr.yaml    | 112 +++++--
 .../bindings/pwm/qcom,ipq6018-pwm.yaml        |  45 +++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  15 +-
 drivers/pwm/Kconfig                           |  12 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-ipq.c                         | 282 ++++++++++++++++++
 6 files changed, 435 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/qcom,ipq6018-pwm.yaml
 create mode 100644 drivers/pwm/pwm-ipq.c
  

Comments

Lee Jones Oct. 12, 2023, 10:06 a.m. UTC | #1
On Thu, 05 Oct 2023 21:35:46 +0530, Devi Priya wrote:
> Add PWM driver and binding support for IPQ chipsets.
> Also, add support for pwm node in ipq6018.
> 
> V15:
> Detailed Change logs are added to the respective patches.
> 
> V14 can be found at:
> https://lore.kernel.org/linux-arm-msm/20231005043127.2690639-1-quic_devipriy@quicinc.com/
> 
> [...]

Applied, thanks!

[1/4] pwm: driver for qualcomm ipq6018 pwm block
      (no commit info)
[2/4] dt-bindings: pwm: add IPQ6018 binding
      (no commit info)
[3/4] dt-bindings: mfd: qcom,tcsr: Add simple-mfd support for IPQ6018
      commit: b4a32d218d424b81a58fbd419e1114b1c1f76168
[4/4] arm64: dts: qcom: ipq6018: add pwm node
      (no commit info)

--
Lee Jones [李琼斯]
  
Lee Jones Oct. 12, 2023, 10:25 a.m. UTC | #2
On Thu, 12 Oct 2023, Lee Jones wrote:

> On Thu, 05 Oct 2023 21:35:46 +0530, Devi Priya wrote:
> > Add PWM driver and binding support for IPQ chipsets.
> > Also, add support for pwm node in ipq6018.
> > 
> > V15:
> > Detailed Change logs are added to the respective patches.
> > 
> > V14 can be found at:
> > https://lore.kernel.org/linux-arm-msm/20231005043127.2690639-1-quic_devipriy@quicinc.com/
> > 
> > [...]
> 
> Applied, thanks!
> 
> [1/4] pwm: driver for qualcomm ipq6018 pwm block
>       (no commit info)
> [2/4] dt-bindings: pwm: add IPQ6018 binding
>       (no commit info)
> [3/4] dt-bindings: mfd: qcom,tcsr: Add simple-mfd support for IPQ6018
>       commit: b4a32d218d424b81a58fbd419e1114b1c1f76168
> [4/4] arm64: dts: qcom: ipq6018: add pwm node
>       (no commit info)

Disregard - tooling error!
  
Krzysztof Kozlowski Oct. 18, 2023, 4:29 p.m. UTC | #3
On 05/10/2023 18:05, Devi Priya wrote:
> Add PWM driver and binding support for IPQ chipsets.
> Also, add support for pwm node in ipq6018.
> 

You need to clearly mark dependencies. Next is now broken because of
this patchset.

Best regards,
Krzysztof
  
Uwe Kleine-König Oct. 18, 2023, 8:52 p.m. UTC | #4
Hello,

On Wed, Oct 18, 2023 at 06:29:30PM +0200, Krzysztof Kozlowski wrote:
> On 05/10/2023 18:05, Devi Priya wrote:
> > Add PWM driver and binding support for IPQ chipsets.
> > Also, add support for pwm node in ipq6018.
> > 
> 
> You need to clearly mark dependencies.

This is something I wouldn't blame Devi for. The dependency is not very
obvious and its kind of normal and expected for a patch series to have
dependencies. *shrug*

> Next is now broken because of this patchset.

If I understand correctly this affects "only" the dtb check targets,
right? Is this bad enough that it needs an urgent fix? I would expect it
doesn't hurt much, am I right here?

I just looked into patch #2 and had a few comments for it.

Best regards
Uwe
  
Krzysztof Kozlowski Oct. 18, 2023, 9:05 p.m. UTC | #5
On 18/10/2023 22:52, Uwe Kleine-König wrote:
> Hello,
> 
> On Wed, Oct 18, 2023 at 06:29:30PM +0200, Krzysztof Kozlowski wrote:
>> On 05/10/2023 18:05, Devi Priya wrote:
>>> Add PWM driver and binding support for IPQ chipsets.
>>> Also, add support for pwm node in ipq6018.
>>>
>>
>> You need to clearly mark dependencies.
> 
> This is something I wouldn't blame Devi for. The dependency is not very
> obvious and its kind of normal and expected for a patch series to have
> dependencies. *shrug*
> 
>> Next is now broken because of this patchset.
> 
> If I understand correctly this affects "only" the dtb check targets,
> right? Is this bad enough that it needs an urgent fix? I would expect it
> doesn't hurt much, am I right here?
> 
> I just looked into patch #2 and had a few comments for it.

Check/Tests of bindings (make dt_binding_check) has warnings because of
missing PWM schema.

Best regards,
Krzysztof