mbox series

[v6,0/4] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

Message ID 20231001103259.11762-1-josua@solid-run.com
Headers
Series arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board |

Message

Josua Mayer Oct. 1, 2023, 10:32 a.m. UTC 
  Add support for the SolidRun LX2162A System on Module (SoM), and the
Clearfog evaluation board.

This patch-set introduces:
- dt node for lx2160a serdes block #2
- dtsi for lx2162a system on module
- dts for lx2162 clearfog

Firstly Please note that checkpatch was complaining about the EEPROMS:
- DT compatible string "st,24c02" appears un-documented
- DT compatible string "st,24c2048" appears un-documented
- DT compatible string "atmel,24c2048" appears un-documented
However to my eyes these *are* already documented in at24.yaml,
and are also used in existing device-tree.

checkpatch is also complaining about various parts of lx2160a.dtsi,
as well as the use of "sfp" property in dpmac nodes - which are common
across layerscape based dts.

Secondly the MAINTAINERS file has not been modified.
Is it required I add myself or *someone* for these new dts?

Changes since v5:
- moved status property to be last in esdhc1 node
- added empty lines between led nodes
- moved i2c2 node according to alphabetical order
- lx2160a.dtsi: disable serdes_2 node by default

Changes since v4:
- extended commit hash reference to 12 characters in description

Changes since v3:
- moved status properties to be last
- changed ethernet-phy on som from /delete-node/ to disabled,

Changes since v2:
- fixed property order in som dts such that compatible is first property
- added reviewed-by tags to bindings patches

Changes since v1:
- fixed DT binding changes to not break existing boards
- explained new board / som DT binding in commit message
- added missing DT binding for dpaa2 mac "phys" property
- reordered "compatible" and "reg" properties: first "compatible", then "reg"
- replaced chip-specific DT node names with generic ones

Josua Mayer (4):
  arm64: dts: lx2160a: describe the SerDes block #2
  dt-bindings: net: dpaa2 mac: add phys property
  dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
  arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

 .../devicetree/bindings/arm/fsl.yaml          |   9 +-
 .../bindings/net/fsl,qoriq-mc-dpmac.yaml      |   4 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi |   7 +
 .../dts/freescale/fsl-lx2162a-clearfog.dts    | 376 ++++++++++++++++++
 .../dts/freescale/fsl-lx2162a-sr-som.dtsi     |  73 ++++
 6 files changed, 469 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>

Comments

Shawn Guo Oct. 10, 2023, 1:48 a.m. UTC | #1 
On Sun, Oct 01, 2023 at 12:32:55PM +0200, Josua Mayer wrote:
> Josua Mayer (4):
>   arm64: dts: lx2160a: describe the SerDes block #2
...
>   dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
>   arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

Applied all 3, thanks!