mbox series

[RFC,0/6] ARM: pxa: GPIO descriptor conversions

Message ID 20230924-pxa-gpio-v1-0-2805b87d8894@skole.hr
Headers
Series ARM: pxa: GPIO descriptor conversions |

Message

Duje Mihanović Sept. 24, 2023, 4:42 p.m. UTC 
  Hello,

Small series to convert some of the board files in the mach-pxa directory
to use the new GPIO descriptor interface.

Most notably, the am200epd, am300epd and Spitz matrix keypad among
others are not converted in this series.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Duje Mihanović (6):
      ARM: pxa: Convert Spitz OHCI to GPIO descriptors
      ARM: pxa: Convert Spitz LEDs to GPIO descriptors
      ARM: pxa: Convert Spitz CF power control to GPIO descriptors
      ARM: pxa: Convert reset driver to GPIO descriptors
      ARM: pxa: Convert Spitz hsync to GPIO descriptors
      ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors

 arch/arm/mach-pxa/gumstix.c    | 24 ++++++++-------
 arch/arm/mach-pxa/reset.c      | 40 +++++++++----------------
 arch/arm/mach-pxa/reset.h      |  3 +-
 arch/arm/mach-pxa/spitz.c      | 68 +++++++++++++++++++++++++++++++++---------
 drivers/usb/host/ohci-pxa27x.c | 10 +++++++
 5 files changed, 92 insertions(+), 53 deletions(-)
---
base-commit: ce9ecca0238b140b88f43859b211c9fdfd8e5b70
change-id: 20230807-pxa-gpio-3ce25d574814

Best regards,

Comments

andy@kernel.org Sept. 25, 2023, 7:37 a.m. UTC | #1 
On Sun, Sep 24, 2023 at 06:42:53PM +0200, Duje Mihanović wrote:
> Hello,
> 
> Small series to convert some of the board files in the mach-pxa directory
> to use the new GPIO descriptor interface.
> 
> Most notably, the am200epd, am300epd and Spitz matrix keypad among
> others are not converted in this series.

Log waited clean up, thank you for doing it!
My comments are placed per individual patches.