mbox series

[v2,0/3] Add blsp1_i2c6 and blsp1_uart2 to MSM8226 SoC

Message ID 20230922-msm8226-i2c6-v2-0-3fb55c47a084@z3ntu.xyz
Headers
Series Add blsp1_i2c6 and blsp1_uart2 to MSM8226 SoC |

Message

Luca Weiss Sept. 22, 2023, 4:55 p.m. UTC 
  Add the I2C bus and UART interface found on the MSM8226. For the I2C bus
we also first need to add the pinctrl function in the driver.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v2:
- Add binding change patch
- Adjust property order in dtsi
- Link to v1: https://lore.kernel.org/r/20230902-msm8226-i2c6-v1-0-9632b8916789@z3ntu.xyz

---
Luca Weiss (3):
      dt-bindings: pinctrl: qcom,msm8226: Add blsp_i2c6 function
      pinctrl: qcom: msm8226: Add blsp_i2c6 function
      ARM: dts: qcom: msm8226: Add blsp1_i2c6 and blsp1_uart2

 .../bindings/pinctrl/qcom,msm8226-pinctrl.yaml     |  4 +--
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi           | 33 ++++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-msm8226.c             |  8 ++++--
 3 files changed, 41 insertions(+), 4 deletions(-)
---
base-commit: 940fcc189c51032dd0282cbee4497542c982ac59
change-id: 20230902-msm8226-i2c6-0f7d74dafa8b

Best regards,

Comments

Linus Walleij Sept. 27, 2023, 8:43 a.m. UTC | #1 
On Fri, Sep 22, 2023 at 6:56 PM Luca Weiss <luca@z3ntu.xyz> wrote:

> Add the I2C bus and UART interface found on the MSM8226. For the I2C bus
> we also first need to add the pinctrl function in the driver.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

v2 looks fine and ACKs in place, so patches applied!

Yours,
Linus Walleij