mbox series

[v5,0/6] Add TPS6594 PMIC support on several boards

Message ID 20230809-tps6594-v5-0-485fd3d63670@ti.com
Headers
Series Add TPS6594 PMIC support on several boards |

Message

Jai Luthra Aug. 9, 2023, 2:47 p.m. UTC 
  TPS6594 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
communicate through the I2C or SPI interfaces.
TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.

This serie adds device tree nodes for TI TPS6594 PMICs found in the
following boards:
- J721EXSOMXEVM:
  Link: https://www.ti.com/tool/J721EXSOMXEVM
- J721S2XSOMXEVM:
  Link: https://www.ti.com/tool/J721S2XSOMXEVM
- J7200XSOMXEVM:
  Link: https://www.ti.com/tool/J7200XSOMXEVM
- AM62A-SKEVM:
  Link: https://www.ti.com/tool/SK-AM62A-LP
- J784S4XEVM
  Link: https://www.ti.com/tool/J784S4XEVM

Changes from v4:
https://lore.kernel.org/all/20230727130908.10656-1-eblanc@baylibre.com/
- Range-diff: https://0x0.st/H_L7.diff
- Rebased on top of linux-next
- Fix min voltage on vdd_usb_3v3 regulator (ldo2) on j721e-som
- Use 3-hex-digit format for pinctrl values

Changes from v3:
https://lore.kernel.org/all/20230417154832.216774-1-eblanc@baylibre.com/
- Rebased on top of v6.5-rc1.
- Change pinctrl number for irq pin as wkup_pmx0 was split on some boards.
- Use already present wkup_i2c0 node instead of creating a new one.

Changes from v2:
https://lore.kernel.org/lkml/20230414112843.1358067-1-eblanc@baylibre.com/
- Change node name as per Krzysztof review.
- Add a fix for the interrupt range of wakeup gpio used by TPS6594 pmic
  on J784S4.
  The interruptions of the PMIC were not working before that.
- Remove dependencies on other patch series as that was a mistake, see
  https://lore.kernel.org/lkml/CRYY2V3HJ0CP.96JQ18PLZB3C@burritosblues/

Changes from v1:
https://lore.kernel.org/lkml/20230329142948.833800-1-eblanc@baylibre.com/
- Harmonize regulators names across the different boards.
- Adjust AVS voltage range.
- Remove some outdated comments.
- Add PMIC to J784S4 board.
- Compatible string modified to match dt-bindings.
- Add gpio-controller and gpio-cells properties.

---
Apelete Seketeli (1):
      arm64: dts: ti: k3-j784s4-evm: Fix interrupt ranges for TPS6594 PMIC

Esteban Blanc (2):
      arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs
      arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs

Jerome Neanne (2):
      arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs
      arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC

Julien Panis (1):
      arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC

 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts          |  95 +++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi      | 163 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi     | 199 +++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts         | 104 ++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi |   2 +-
 6 files changed, 719 insertions(+), 1 deletion(-)
---
base-commit: 21ef7b1e17d039053edaeaf41142423810572741
change-id: 20230809-tps6594-e450b5738e66

Best regards,

Comments

Nishanth Menon Aug. 9, 2023, 3:34 p.m. UTC | #1 
On 20:17-20230809, Jai Luthra wrote:
> TPS6594 is a Power Management IC which provides regulators and others
> features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
> PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
> communicate through the I2C or SPI interfaces.
> TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
> 
> This serie adds device tree nodes for TI TPS6594 PMICs found in the
> following boards:
> - J721EXSOMXEVM:
>   Link: https://www.ti.com/tool/J721EXSOMXEVM
> - J721S2XSOMXEVM:
>   Link: https://www.ti.com/tool/J721S2XSOMXEVM
> - J7200XSOMXEVM:
>   Link: https://www.ti.com/tool/J7200XSOMXEVM
> - AM62A-SKEVM:
>   Link: https://www.ti.com/tool/SK-AM62A-LP
> - J784S4XEVM
>   Link: https://www.ti.com/tool/J784S4XEVM


In the refresh, could you roll in
https://lore.kernel.org/linux-arm-kernel/22e92c94-b3ee-3505-57d3-a3243e8671d8@ti.com/
into this series rather than with Audio series?

Please also see if any other PMIC defconfig needs to be enabled while at
it.