mbox series

[v2,0/3] Add SPI module for StarFive JH7110 SoC

Message ID 20230713090015.127541-1-william.qiu@starfivetech.com
Headers
Series Add SPI module for StarFive JH7110 SoC |

Message

William Qiu July 13, 2023, 9 a.m. UTC 
  Hi,

This patchset adds initial rudimentary support for the StarFive
SPI controller. And this driver will be used in StarFive's
VisionFive 2 board. The first patch constrain minItems of clocks
for JH7110 SPI and Patch 2 adds support for StarFive JH7110 SPI.

Changes v1->v2:
- Rebaed to v6.5rc1.
- Submitted reference file separately.
- Dropped 'status' node as it was 'okay' by default.
- Dropped Co-developed-by message.

The patch series is based on v6.5rc1.

William Qiu (3):
  dt-bindings: spi: add reference file to YAML
  dt-bindings: spi: constrain minItems of clocks and clock-names
  riscv: dts: starfive: Add spi node for JH7110 SoC

 .../devicetree/bindings/spi/spi-pl022.yaml    | 11 ++-
 .../jh7110-starfive-visionfive-2.dtsi         | 50 ++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 98 +++++++++++++++++++
 3 files changed, 156 insertions(+), 3 deletions(-)

--
2.34.1

Comments

Mark Brown July 24, 2023, 6:28 p.m. UTC | #1 
On Thu, 13 Jul 2023 17:00:12 +0800, William Qiu wrote:
> This patchset adds initial rudimentary support for the StarFive
> SPI controller. And this driver will be used in StarFive's
> VisionFive 2 board. The first patch constrain minItems of clocks
> for JH7110 SPI and Patch 2 adds support for StarFive JH7110 SPI.
> 
> Changes v1->v2:
> - Rebaed to v6.5rc1.
> - Submitted reference file separately.
> - Dropped 'status' node as it was 'okay' by default.
> - Dropped Co-developed-by message.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/3] dt-bindings: spi: add reference file to YAML
      commit: 8858babff615ee366bf570c1facfbd0845dd924e
[2/3] dt-bindings: spi: constrain minItems of clocks and clock-names
      (no commit info)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark