mbox series

[v3,0/3] mtd: rawnand: marvell: add support for AC5 SoC

Message ID 20230703035044.2063303-1-chris.packham@alliedtelesis.co.nz
Headers
Series mtd: rawnand: marvell: add support for AC5 SoC |

Message

Chris Packham July 3, 2023, 3:50 a.m. UTC 
  This series adds support for the NAND Flash Controller on the AC5/AC5X SOC. Its
dependent series are all in mainline now so this should apply cleanly on top of
that.

I've tried to stick to the minimal changes required to get the NFC working on
the board I have (AC5X + S34ML02G2). Marvell's SDK has hard coded tables of
ndtr values for the different timing modes but so far that seems unnecessary.

Chris Packham (3):
  dt-bindings: mtd: Add AC5 specific binding
  arm64: dts: marvell: Add NAND flash controller to AC5
  mtd: rawnand: marvell: add support for AC5 SoC

 .../bindings/mtd/marvell,nand-controller.yaml    |  1 +
 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi    | 16 ++++++++++++++++
 drivers/mtd/nand/raw/Kconfig                     |  2 +-
 drivers/mtd/nand/raw/marvell_nand.c              | 16 ++++++++++++++++
 4 files changed, 34 insertions(+), 1 deletion(-)