[v2,0/6] can: tcan4x5x: Introduce tcan4552/4553

Message ID 20230621093103.3134655-1-msp@baylibre.com
Headers
Series can: tcan4x5x: Introduce tcan4552/4553 |

Message

Markus Schneider-Pargmann June 21, 2023, 9:30 a.m. UTC
  Hi everyone,

This series introduces two new chips tcan-4552 and tcan-4553. The
generic driver works in general but needs a few small changes. These are
caused by the removal of wake and state pins.

In v2 I updated the bindings to use tcan4x5x always as a fallback. The
driver now uses the first more specific binding if available. If the
given binding does not match the chip that is present, a warning is
printed and the correct driver data is loaded instead.

Based on v6.4-rc1.

Best,
Markus

Changes in v2:
- Update the binding documentation to specify tcan4552 and tcan4553 with
  the tcan4x5x as fallback
- Update the driver to use auto detection as well. If compatible differs
  from the ID2 register, use the ID2 register and print a warning.
- Small style changes

Previous versions:
v1 - https://lore.kernel.org/lkml/20230314151201.2317134-1-msp@baylibre.com

Markus Schneider-Pargmann (6):
  dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  can: tcan4x5x: Remove reserved register 0x814 from writable table
  can: tcan4x5x: Check size of mram configuration
  can: tcan4x5x: Rename ID registers to match datasheet
  can: tcan4x5x: Add support for tcan4552/4553
  can: tcan4x5x: Add error messages in probe

 .../devicetree/bindings/net/can/tcan4x5x.txt  |  11 +-
 drivers/net/can/m_can/m_can.c                 |  16 ++
 drivers/net/can/m_can/m_can.h                 |   1 +
 drivers/net/can/m_can/tcan4x5x-core.c         | 161 ++++++++++++++----
 drivers/net/can/m_can/tcan4x5x-regmap.c       |   1 -
 5 files changed, 155 insertions(+), 35 deletions(-)


base-commit: ac9a78681b921877518763ba0e89202254349d1b