mbox series

[v6,0/3] media: i2c: Add support for alvium camera

Message ID 20230616095713.187544-1-tomm.merciai@gmail.com
Headers
Series media: i2c: Add support for alvium camera |

Message

Tommaso Merciai June 16, 2023, 9:56 a.m. UTC 
  Hello All,

This series add support for Allied Vision Alvium camera.
The Alvium camera is shipped with sensor + isp in the same housing.
The camera can be equipped with one out of various sensor and abstract
the user from this. Camera is connected via MIPI CSI-2.

Working on top of Ideas on Board (branch: ideasonboard/v6.2/isi)
I'm able to test the driver on imx8mp-evk.
I collect also some patches to enable HDMI on imx8mp-evk from Pengutronix
(branch: pengutronix-imx8mp-hdmi)

I collect the patchset required to enable ISI + HDMI on imx8mp-evk into
the following branch from Avnet Silica Software & Services EMEA [1].

Some documentation on testing ISP and ISI of imx8mp-evk here [2].

Thanks all for the great work!

[1] - https://github.com/avs-sas/linux/tree/tm/ideasonboard/v6.4.0-rc2/isi/imx8mp_evk/alvium_drv_skel1e_v1
[2] - https://gist.github.com/Scott31393/077a10024a6058536d3f2fdde476265a

Tommaso Merciai (3):
  dt-bindings: vendor-prefixes: Add prefix alliedvision
  media: dt-bindings: alvium: add document YAML binding
  media: i2c: Add support for alvium camera

 .../media/i2c/alliedvision,alvium-csi2.yaml   |   97 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/media/i2c/Kconfig                     |   11 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/alvium-csi2.c               | 3159 +++++++++++++++++
 drivers/media/i2c/alvium-csi2.h               |  475 +++
 6 files changed, 3745 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
 create mode 100644 drivers/media/i2c/alvium-csi2.c
 create mode 100644 drivers/media/i2c/alvium-csi2.h