mbox series

[v1,00/15] Maintenance updates for Protonic Holland boards

Message ID 20230530120345.2874900-1-o.rempel@pengutronix.de
Headers
Series Maintenance updates for Protonic Holland boards |

Message

Oleksij Rempel May 30, 2023, 12:03 p.m. UTC 
  This patchset consists of several updates that address issues on
Protonic Holland's supported i.MX6-based devices, with a particular
focus on the USB subsystem configuration, thermal zones, and the naming
of GPIO keys. Some of these changes include the activation of USB over-
current detection on certain ports, the disabling of unused USB PHY
nodes, fixing USB-related warnings, adding trip points to thermal zones
on several devices, and renaming the 'power' key to meet the necessary
conventions.

David Jander (1):
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion

Oleksij Rempel (11):
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
    node
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
    port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
    warnings
  ARM: dts: imx6qdl: vicut1: rename power to power-button

Robin van der Gracht (3):
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
    MDC

 arch/arm/boot/dts/imx6dl-alti6p.dts          | 10 +++++++
 arch/arm/boot/dts/imx6dl-lanmcu.dts          |  9 +++++++
 arch/arm/boot/dts/imx6dl-plybas.dts          |  2 +-
 arch/arm/boot/dts/imx6dl-plym2m.dts          | 24 +++++++++++++++++
 arch/arm/boot/dts/imx6dl-prtmvt.dts          | 11 +++++++-
 arch/arm/boot/dts/imx6dl-prtrvt.dts          |  4 +++
 arch/arm/boot/dts/imx6dl-prtvt7.dts          | 28 +++++++++++++++++---
 arch/arm/boot/dts/imx6dl-victgo.dts          | 24 +++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts           |  3 ---
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi        | 11 +++++++-
 arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi |  2 +-
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi        | 19 +++++++++++--
 arch/arm/boot/dts/imx6qp-prtwd3.dts          |  2 +-
 arch/arm/boot/dts/imx6ul-prti6g.dts          |  1 +
 14 files changed, 137 insertions(+), 13 deletions(-)

Comments

Shawn Guo June 4, 2023, 1:08 p.m. UTC | #1 
On Tue, May 30, 2023 at 02:03:30PM +0200, Oleksij Rempel wrote:
> This patchset consists of several updates that address issues on
> Protonic Holland's supported i.MX6-based devices, with a particular
> focus on the USB subsystem configuration, thermal zones, and the naming
> of GPIO keys. Some of these changes include the activation of USB over-
> current detection on certain ports, the disabling of unused USB PHY
> nodes, fixing USB-related warnings, adding trip points to thermal zones
> on several devices, and renaming the 'power' key to meet the necessary
> conventions.
> 
> David Jander (1):
>   ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
> 
> Oleksij Rempel (11):
>   ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
>   ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
>     node
>   ARM: dts: imx6dl: Add trip points to thermal zones on several devices
>   ARM: dts: imx6dl: vicut1: Address USB related warnings
>   ARM: dts: imx6dl: alti6p: fix different USB related warnings
>   ARM: dts: imx6dl: prtmvt: fix different USB related warnings
>   ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
>     port
>   ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
>     port
>   ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
>     port
>   ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
>     warnings
>   ARM: dts: imx6qdl: vicut1: rename power to power-button
> 
> Robin van der Gracht (3):
>   ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
>   ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
>   ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
>     MDC

Applied all, thanks!