mbox series

[v2,0/2] media: i2c: Add support for alvium camera

Message ID 20230526173955.797226-1-tomm.merciai@gmail.com
Headers
Series media: i2c: Add support for alvium camera |

Message

Tommaso Merciai May 26, 2023, 5:39 p.m. UTC 
  Hello All,

This series add support for Allied Vision Alvium camera.
The Alvium camera is shipped with sensor + isp in the same housing.
The camera can be equipped with one out of various sensor and abstract
the user from this. Camera is connected via MIPI CSI-2.

Working on top of Ideas on Board (branch: ideasonboard/v6.2/isi)
I'm able to test the driver on imx8mp-evk.
I collect also some patches to enable HDMI on imx8mp-evk from Pengutronix
(branch: pengutronix-imx8mp-hdmi)

I collect the patchset required to enable ISI + HDMI on imx8mp-evk into
the following branch from Avnet Silica Software & Services EMEA [1].

Some documentation on testing ISP and ISI of imx8mp-evk here [2].

Thanks all for the great work!

[1] - https://github.com/avs-sas/linux/tree/tm/ideasonboard/v6.4.0-rc2/isi/imx8mp_evk/alvium_drv_skel1e_v1
[2] - https://gist.github.com/Scott31393/077a10024a6058536d3f2fdde476265a

Tommaso Merciai (2):
  media: dt-bindings: alvium: add document YAML binding
  media: i2c: Add support for alvium camera

 .../media/i2c/alliedvision,alvium.yaml        |  115 +
 drivers/media/i2c/Kconfig                     |    9 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/alvium.c                    | 3547 +++++++++++++++++
 drivers/media/i2c/alvium.h                    |  500 +++
 5 files changed, 4172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml
 create mode 100644 drivers/media/i2c/alvium.c
 create mode 100644 drivers/media/i2c/alvium.h