mbox series

[v4,0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals

Message ID 20230516075908.2323372-1-bhupesh.sharma@linaro.org
Headers
Series arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals |

Message

Bhupesh Sharma May 16, 2023, 7:59 a.m. UTC 
  Changes since v3:
-----------------
- v3 can be seen here: https://lore.kernel.org/lkml/20230505075354.1634547-1-bhupesh.sharma@linaro.org/
- Use explicit qrb4210 .mbn files instead of qrb4210-rb2 .mbn ones.
- Collected R-Bs from Dmitry.

Changes since v2:
-----------------
- v2 can be seen here: https://lore.kernel.org/linux-arm-msm/20230501105832.1185477-1-bhupesh.sharma@linaro.org/
- Use explicit qrb4210-rb2 .mbn files instead of sm6115 .mdt ones.
- Collected Acks and R-Bs from Konrad and Krzysztof.

Changes since v1:
-----------------
- v1 can be seen here: https://lore.kernel.org/linux-arm-msm/20230501102035.1180701-2-bhupesh.sharma@linaro.org/
- Converted the SDHC2 CD gpio fix into a separate patch as
  suggested by Krzysztof.

Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

While at it also fix the Card-Detect (CD) gpio for SDHC2 which
allows the uSD card to be detected on the board.

Also enable the adsp and cdsp remoteproc nodes on QRB4210-RB2 board.



*** BLURB HERE ***

Bhupesh Sharma (3):
  arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes

 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 30 +++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

Comments

Bjorn Andersson May 23, 2023, 7:40 p.m. UTC | #1 
On Tue, 16 May 2023 13:29:05 +0530, Bhupesh Sharma wrote:
> Changes since v3:
> -----------------
> - v3 can be seen here: https://lore.kernel.org/lkml/20230505075354.1634547-1-bhupesh.sharma@linaro.org/
> - Use explicit qrb4210 .mbn files instead of qrb4210-rb2 .mbn ones.
> - Collected R-Bs from Dmitry.
> 
> Changes since v2:
> -----------------
> - v2 can be seen here: https://lore.kernel.org/linux-arm-msm/20230501105832.1185477-1-bhupesh.sharma@linaro.org/
> - Use explicit qrb4210-rb2 .mbn files instead of sm6115 .mdt ones.
> - Collected Acks and R-Bs from Konrad and Krzysztof.
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
      commit: 10254fb73fdadec81e47a776e149863a13030291
[2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
      commit: 14e6c47b628788a8c8634bc59b2dd50d68a74de3
[3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
      commit: 50931b44dc751784cdc5721bf30a79093c2c9fe9

Best regards,