mbox series

[v6,0/3] Add support for ESM

Message ID 20230504080526.133149-1-n-francis@ti.com
Headers
Series Add support for ESM |

Message

Neha Malcom Francis May 4, 2023, 8:05 a.m. UTC 
  ESM (Error Signaling Module) is a fundamental IP responsible for
handling safety events. The driver currently present in U-Boot is
responsible for configuring ESM. This patch series adds dt-binding and
nodes for J721E and J7200. This goes towards end goal of having DTB sync
with that of U-Boot as well as ensuring completeness of hardware
description in devicetree.

Changes in v6:
	- moved additionalProperties after required in dt-binding

Changes in v5:
	- added esm node to k3-j721e-main.dtsi

Changes in v4:
	- hwmon/ti,j721e-esm.yaml -> misc/ti,j721e-esm.yaml
	- retained tag by Krzysztof for dt-binding

Changes in v3:
	- formatting changes in dt-binding
	- modified example in dt-binding cbass_main -> bus
	- changed subject misc -> hwmon

Changes in v2:
	- misc/esm-k3.yaml -> hwmon/ti,j721e-esm.yaml
	- formatting changes in dt-binding
	- modified example in dt-binding

Neha Malcom Francis (3):
  dt-bindings: misc: esm: Add ESM support for TI K3 devices
  arm64: dts: ti: k3-j721e: Add ESM support
  arm64: dts: ti: k3-j7200: Add ESM support

 .../bindings/misc/ti,j721e-esm.yaml           | 53 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  6 +++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |  1 +
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  6 +++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  1 +
 5 files changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml

Comments

Vignesh Raghavendra June 15, 2023, 1:30 p.m. UTC | #1 
Hi Neha Malcom Francis,

On Thu, 04 May 2023 13:35:23 +0530, Neha Malcom Francis wrote:
> ESM (Error Signaling Module) is a fundamental IP responsible for
> handling safety events. The driver currently present in U-Boot is
> responsible for configuring ESM. This patch series adds dt-binding and
> nodes for J721E and J7200. This goes towards end goal of having DTB sync
> with that of U-Boot as well as ensuring completeness of hardware
> description in devicetree.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices
      commit: 444f312a73f789bb9f10bbb423f7ae6c3aa76198
[2/3] arm64: dts: ti: k3-j721e: Add ESM support
      commit: 19bfd51845d551c6f4e39969c13c6b8285b94d1c
[3/3] arm64: dts: ti: k3-j7200: Add ESM support
      commit: e3d1f2768853f375b87a1c6fc00501165ddae49d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh