mbox series

[v3,0/2] STMPE device tree bindings

Message ID 20230426-stmpe-dt-bindings-v3-0-eac1d736e488@linaro.org
Headers
Series STMPE device tree bindings |

Message

Linus Walleij May 7, 2023, 9:19 p.m. UTC 
  This adds the missing GPIO bindings for the STMPE port expander
and converts the existing MFD binding to YAML.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v3:
- Update to review feedback
- Collected some ack/review tags
- I guess Bartosz should apply 1/2 and Lee should apply 2/2.
- Link to v2: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v2-0-2f85a1fffcda@linaro.org

Changes in v2:
- Split off a separate GPIO binding
- Updated the MFD binding according to feedback

---
Linus Walleij (2):
      dt-bindings: gpio: Add STMPE YAML DT schema
      dt-bindings: MFD: Convert STMPE to YAML schema

 .../devicetree/bindings/gpio/st,stmpe-gpio.yaml    |  51 ++++
 .../devicetree/bindings/input/stmpe-keypad.txt     |  41 ---
 .../bindings/input/touchscreen/stmpe.txt           | 108 --------
 .../devicetree/bindings/mfd/st,stmpe.yaml          | 297 +++++++++++++++++++++
 Documentation/devicetree/bindings/mfd/stmpe.txt    |  42 ---
 5 files changed, 348 insertions(+), 191 deletions(-)
---
base-commit: c712a112ed4e91afab1cc7c978af228c77a4fb13
change-id: 20230426-stmpe-dt-bindings-c3479dd71a28

Best regards,

Comments

Krzysztof Kozlowski May 8, 2023, 9:39 a.m. UTC | #1 
On 07/05/2023 23:19, Linus Walleij wrote:
> This adds the missing GPIO bindings for the STMPE port expander
> and converts the existing MFD binding to YAML.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Changes in v3:
> - Update to review feedback
> - Collected some ack/review tags
> - I guess Bartosz should apply 1/2 and Lee should apply 2/2.
> - Link to v2: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v2-0-2f85a1fffcda@linaro.org

2/2 depends on 1/2, so it must go via one tree.


Best regards,
Krzysztof
Linus Walleij May 8, 2023, 12:22 p.m. UTC | #2 
On Mon, May 8, 2023 at 11:39 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> On 07/05/2023 23:19, Linus Walleij wrote:

> > This adds the missing GPIO bindings for the STMPE port expander
> > and converts the existing MFD binding to YAML.
> >
> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> > ---
> > Changes in v3:
> > - Update to review feedback
> > - Collected some ack/review tags
> > - I guess Bartosz should apply 1/2 and Lee should apply 2/2.
> > - Link to v2: https://lore.kernel.org/r/20230426-stmpe-dt-bindings-v2-0-2f85a1fffcda@linaro.org
>
> 2/2 depends on 1/2, so it must go via one tree.

Ah you're right. I hope Lee can take it all then. Or the DT tree.

Yours,
Linus Walleij