mbox series

[v6,0/2] leds: Add a driver for the BD2606MVV

Message ID 20230419111806.1100437-1-andreas@kemnade.info
Headers
Series leds: Add a driver for the BD2606MVV |

Message

Andreas Kemnade April 19, 2023, 11:18 a.m. UTC 
  Add the binding description and the corresponding driver for
the BD2606.

Changes in V6:
- comments about dealing with shared brightness registers
- comment about building as a module

Changes in V5:
- remove "driver" from the binding subject line
- avoid presenting shared brightness to the userspace
  by allowing only on/off in such cases.

Changes in V4:
- minor tuning of description in bindings
 
Changes in V3:
- binding cleanup
- move active variable from long-living struct onto stack

Changes in V2:
- Add Datasheet link
- use fwnode api
- remove childnode count check, that will bail out
  anyways later.
- add enable-gpios to binding but not to driver due to lack of
  testing ability

Andreas Kemnade (2):
  dt-bindings: leds: Add ROHM BD2606MVV LED
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver

 .../bindings/leds/rohm,bd2606mvv.yaml         |  81 +++++++++
 drivers/leds/Kconfig                          |  14 ++
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-bd2606mvv.c                 | 160 ++++++++++++++++++
 4 files changed, 256 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
 create mode 100644 drivers/leds/leds-bd2606mvv.c