mbox series

[0/2] PHY-GMII-SEL: Add support for J784S4 SoC

Message ID 20230331062521.529005-1-s-vadapalli@ti.com
Headers
Series PHY-GMII-SEL: Add support for J784S4 SoC |

Message

Siddharth Vadapalli March 31, 2023, 6:25 a.m. UTC 
  Hello,

This series TI's J784S4 SoC. A new compatible is added for the J784S4 SoC,
with QSGMII mode enabled. Also, the CPSW9G instance of J784S4 SoC supports
USXGMII mode. Thus, add support to configure USXGMII mode.

Note:
This series is based on top of the following series:
https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/

The patch corresponding to the device-tree bindings for the compatible
"ti,j784s4-cpsw9g-phy-gmii-sel" is posted at:
https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
Since the above patch has received an Acked-by from Krzysztof Kozlowski,
I am posting this series using the compatible.

Regards,
Siddharth.

Siddharth Vadapalli (2):
  phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4
  phy: ti: gmii-sel: Enable USXGMII mode for J784S4

 drivers/phy/ti/phy-gmii-sel.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Vinod Koul March 31, 2023, 1:33 p.m. UTC | #1 
On 31-03-23, 11:55, Siddharth Vadapalli wrote:
> Hello,
> 
> This series TI's J784S4 SoC. A new compatible is added for the J784S4 SoC,
> with QSGMII mode enabled. Also, the CPSW9G instance of J784S4 SoC supports
> USXGMII mode. Thus, add support to configure USXGMII mode.

Sorry this fails to apply for me, pls rebase and send

> 
> Note:
> This series is based on top of the following series:
> https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
> 
> The patch corresponding to the device-tree bindings for the compatible
> "ti,j784s4-cpsw9g-phy-gmii-sel" is posted at:
> https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
> Since the above patch has received an Acked-by from Krzysztof Kozlowski,
> I am posting this series using the compatible.
> 
> Regards,
> Siddharth.
> 
> Siddharth Vadapalli (2):
>   phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4
>   phy: ti: gmii-sel: Enable USXGMII mode for J784S4
> 
>  drivers/phy/ti/phy-gmii-sel.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> -- 
> 2.25.1
Siddharth Vadapalli March 31, 2023, 1:49 p.m. UTC | #2 
Hello Vinod,

On 31-03-2023 19:03, Vinod Koul wrote:
> On 31-03-23, 11:55, Siddharth Vadapalli wrote:
>> Hello,
>>
>> This series TI's J784S4 SoC. A new compatible is added for the J784S4 SoC,
>> with QSGMII mode enabled. Also, the CPSW9G instance of J784S4 SoC supports
>> USXGMII mode. Thus, add support to configure USXGMII mode.
> 
> Sorry this fails to apply for me, pls rebase and send

This series has to be applied after the following series:
https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
as mentioned below.

Regards,
Siddharth.
> 
>>
>> Note:
>> This series is based on top of the following series:
>> https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
>>
>> The patch corresponding to the device-tree bindings for the compatible
>> "ti,j784s4-cpsw9g-phy-gmii-sel" is posted at:
>> https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
>> Since the above patch has received an Acked-by from Krzysztof Kozlowski,
>> I am posting this series using the compatible.
>>
>> Regards,
>> Siddharth.
>>
>> Siddharth Vadapalli (2):
>>   phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J784S4
>>   phy: ti: gmii-sel: Enable USXGMII mode for J784S4
>>
>>  drivers/phy/ti/phy-gmii-sel.c | 22 ++++++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>
>> -- 
>> 2.25.1
>
Vinod Koul May 16, 2023, 2:31 p.m. UTC | #3 
On 31-03-23, 19:19, Siddharth Vadapalli wrote:
> Hello Vinod,
> 
> On 31-03-2023 19:03, Vinod Koul wrote:
> > On 31-03-23, 11:55, Siddharth Vadapalli wrote:
> >> Hello,
> >>
> >> This series TI's J784S4 SoC. A new compatible is added for the J784S4 SoC,
> >> with QSGMII mode enabled. Also, the CPSW9G instance of J784S4 SoC supports
> >> USXGMII mode. Thus, add support to configure USXGMII mode.
> > 
> > Sorry this fails to apply for me, pls rebase and send
> 
> This series has to be applied after the following series:
> https://lore.kernel.org/r/20230309063514.398705-1-s-vadapalli@ti.com/
> as mentioned below.

Okay applied now