[v2,00/17] MT6795 Helio X10 and Sony Xperia M5: DT step 2!

  Changes in v2:
 - Squashed the addition of mediatek,mt6795-gce.h header with the
   commit adding the MT6795 GCE compatible.

This series further enhances the support for the MT6795 Helio X10 SoC
and the Sony Xperia M5 smartphone.

In particular, for the SoC support, this adds:
 - Frequency Hopping support
 - I2C controllers
 - Power domains
 - IOMMU support and LARBs
 - GCE/CMDQ Mailbox
 - VDECSYS and VENCSYS clocks
 - MMSYS support

...and, on the Xperia M5 smartphone, this adds:
 - Frequency Hopping with Spread Spectrum for MAINPLL, MPLL, MSDCPLL
 - Touchscreen support (Synaptics S2726, fw id: 1898977, RMI4 protocol)
 - Accelerometer
 - Magnetometer
 - Proximity sensor
 - NFC support

...all of which was successfully tested on the Xperia M5 smartphone.

This series depends on [1] for the MMSYS support.

Plan for step 3 is to push upstream full display support, which does
already work on my custom tree ;-)

[1]: https://lore.kernel.org/all/20230309102618.114157-1-angelogioacchino.delregno@collabora.com/

Cheers!

AngeloGioacchino Del Regno (17):
  arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node
  arm64: dts: mediatek: mt6795: Add apmixedsys syscon node
  arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping
  dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
  arm64: dts: mediatek: mt6795: Add nodes for I2C controllers
  arm64: dts: mediatek: mt6795: Add SoC power domains
  dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
  arm64: dts: mediatek: mt6795: Add support for the CMDQ/GCE mailbox
  arm64: dts: mediatek: mt6795: Add MMSYS node for multimedia clocks
  arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks
  arm64: dts: mediatek: mt6795: Add support for IOMMU and LARBs
  arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses
  arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen
  arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
  arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
  arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310
    Proximity
  arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3

 .../devicetree/bindings/i2c/i2c-mt65xx.yaml   |   4 +
 .../mailbox/mediatek,gce-mailbox.yaml         |  20 +-
 .../dts/mediatek/mt6795-sony-xperia-m5.dts    | 166 ++++++++++++
 arch/arm64/boot/dts/mediatek/mt6795.dtsi      | 245 ++++++++++++++++++
 include/dt-bindings/gce/mediatek,mt6795-gce.h | 123 +++++++++
 5 files changed, 550 insertions(+), 8 deletions(-)
 create mode 100644 include/dt-bindings/gce/mediatek,mt6795-gce.h
  

On 27/03/2023 10:36, AngeloGioacchino Del Regno wrote:
> Changes in v2:
>   - Squashed the addition of mediatek,mt6795-gce.h header with the
>     commit adding the MT6795 GCE compatible.
> 
> This series further enhances the support for the MT6795 Helio X10 SoC
> and the Sony Xperia M5 smartphone.
> 
> In particular, for the SoC support, this adds:
>   - Frequency Hopping support
>   - I2C controllers
>   - Power domains
>   - IOMMU support and LARBs
>   - GCE/CMDQ Mailbox
>   - VDECSYS and VENCSYS clocks
>   - MMSYS support
> 
> ...and, on the Xperia M5 smartphone, this adds:
>   - Frequency Hopping with Spread Spectrum for MAINPLL, MPLL, MSDCPLL
>   - Touchscreen support (Synaptics S2726, fw id: 1898977, RMI4 protocol)
>   - Accelerometer
>   - Magnetometer
>   - Proximity sensor
>   - NFC support
> 
> ...all of which was successfully tested on the Xperia M5 smartphone.
> 
> This series depends on [1] for the MMSYS support.
> 
> Plan for step 3 is to push upstream full display support, which does
> already work on my custom tree ;-)
> 
> [1]: https://lore.kernel.org/all/20230309102618.114157-1-angelogioacchino.delregno@collabora.com/
> 
> Cheers!
> 

Applied all but:
4/17 dt-binding already applied
7/17 dt-binding not applied
8/17 we are missing the dt binding

Thanks a lot for the great work
Matthias

> AngeloGioacchino Del Regno (17):
>    arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node
>    arm64: dts: mediatek: mt6795: Add apmixedsys syscon node
>    arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping
>    dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
>    arm64: dts: mediatek: mt6795: Add nodes for I2C controllers
>    arm64: dts: mediatek: mt6795: Add SoC power domains
>    dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
>    arm64: dts: mediatek: mt6795: Add support for the CMDQ/GCE mailbox
>    arm64: dts: mediatek: mt6795: Add MMSYS node for multimedia clocks
>    arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks
>    arm64: dts: mediatek: mt6795: Add support for IOMMU and LARBs
>    arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses
>    arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen
>    arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
>    arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
>    arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310
>      Proximity
>    arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3
> 
>   .../devicetree/bindings/i2c/i2c-mt65xx.yaml   |   4 +
>   .../mailbox/mediatek,gce-mailbox.yaml         |  20 +-
>   .../dts/mediatek/mt6795-sony-xperia-m5.dts    | 166 ++++++++++++
>   arch/arm64/boot/dts/mediatek/mt6795.dtsi      | 245 ++++++++++++++++++
>   include/dt-bindings/gce/mediatek,mt6795-gce.h | 123 +++++++++
>   5 files changed, 550 insertions(+), 8 deletions(-)
>   create mode 100644 include/dt-bindings/gce/mediatek,mt6795-gce.h
>
  

On 02/04/2023 19:26, Matthias Brugger wrote:
> 
> 
> On 27/03/2023 10:36, AngeloGioacchino Del Regno wrote:
>> Changes in v2:
>>   - Squashed the addition of mediatek,mt6795-gce.h header with the
>>     commit adding the MT6795 GCE compatible.
>>
>> This series further enhances the support for the MT6795 Helio X10 SoC
>> and the Sony Xperia M5 smartphone.
>>
>> In particular, for the SoC support, this adds:
>>   - Frequency Hopping support
>>   - I2C controllers
>>   - Power domains
>>   - IOMMU support and LARBs
>>   - GCE/CMDQ Mailbox
>>   - VDECSYS and VENCSYS clocks
>>   - MMSYS support
>>
>> ...and, on the Xperia M5 smartphone, this adds:
>>   - Frequency Hopping with Spread Spectrum for MAINPLL, MPLL, MSDCPLL
>>   - Touchscreen support (Synaptics S2726, fw id: 1898977, RMI4 protocol)
>>   - Accelerometer
>>   - Magnetometer
>>   - Proximity sensor
>>   - NFC support
>>
>> ...all of which was successfully tested on the Xperia M5 smartphone.
>>
>> This series depends on [1] for the MMSYS support.
>>
>> Plan for step 3 is to push upstream full display support, which does
>> already work on my custom tree ;-)
>>
>> [1]: 
>> https://lore.kernel.org/all/20230309102618.114157-1-angelogioacchino.delregno@collabora.com/
>>
>> Cheers!
>>
> 
> Applied all but:
> 4/17 dt-binding already applied
> 7/17 dt-binding not applied
> 8/17 we are missing the dt binding
> 

I dropped the following patches for now:
09/17 and 11/17 due to missing 07/17 this break creation of DTBs.

I also dopped 14/17 and 15/17 as buidling the DTBs gave the following warning:
arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts:104.21-109.4: Warning 
(unit_address_format): /soc/i2c@11010000/accelerometer@0x10: unit name should 
not have leading "0x"
arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts:111.20-114.4: Warning 
(unit_address_format): /soc/i2c@11010000/magnetometer@0x12: unit name should not 
have leading "0x"
arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts:104.21-109.4: Warning 
(i2c_bus_reg): /soc/i2c@11010000/accelerometer@0x10: I2C bus unit address format 
error, expected "10"
arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts:111.20-114.4: Warning 
(i2c_bus_reg): /soc/i2c@11010000/magnetometer@0x12: I2C bus unit address format 
error, expected "12"

Regards,
Matthias

> Thanks a lot for the great work
> Matthias
> 
>> AngeloGioacchino Del Regno (17):
>>    arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node
>>    arm64: dts: mediatek: mt6795: Add apmixedsys syscon node
>>    arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping
>>    dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
>>    arm64: dts: mediatek: mt6795: Add nodes for I2C controllers
>>    arm64: dts: mediatek: mt6795: Add SoC power domains
>>    dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
>>    arm64: dts: mediatek: mt6795: Add support for the CMDQ/GCE mailbox
>>    arm64: dts: mediatek: mt6795: Add MMSYS node for multimedia clocks
>>    arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks
>>    arm64: dts: mediatek: mt6795: Add support for IOMMU and LARBs
>>    arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses
>>    arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen
>>    arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
>>    arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
>>    arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310
>>      Proximity
>>    arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3
>>
>>   .../devicetree/bindings/i2c/i2c-mt65xx.yaml   |   4 +
>>   .../mailbox/mediatek,gce-mailbox.yaml         |  20 +-
>>   .../dts/mediatek/mt6795-sony-xperia-m5.dts    | 166 ++++++++++++
>>   arch/arm64/boot/dts/mediatek/mt6795.dtsi      | 245 ++++++++++++++++++
>>   include/dt-bindings/gce/mediatek,mt6795-gce.h | 123 +++++++++
>>   5 files changed, 550 insertions(+), 8 deletions(-)
>>   create mode 100644 include/dt-bindings/gce/mediatek,mt6795-gce.h
>>