mbox series

[v2,0/5] Add support for new boards in the imx6dl-yapp4 family

Message ID 20230314180608.44482-1-michal.vokac@ysoft.com
Headers
Series Add support for new boards in the imx6dl-yapp4 family |

Message

Michal Vokáč March 14, 2023, 6:06 p.m. UTC 
  Hi,

Patches 1,2,3 are new in this v2 series and fixes minor issues for
the already supported boards. Patches 4 and 5 adds support for some
new redesigned boards based on i.MX6 SoC.

Michal Vokáč (5):
  ARM: dts: imx6dl-yapp4: Move phy reset into switch node
  ARM: dts: imx6dl-yapp4: Move status to the end of property list
  ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
  dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and
    Pegasus+
  ARM: dts: imx6dl-yapp43: Add support for new HW revision of the
    IOTA board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi    |   7 +-
 arch/arm/boot/dts/imx6dl-yapp4-lynx.dts       |  58 ++
 arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts    |  42 ++
 arch/arm/boot/dts/imx6dl-yapp43-common.dtsi   | 615 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-yapp4-pegasus.dts     |  58 ++
 .../boot/dts/imx6qp-yapp4-pegasus-plus.dts    |  58 ++
 8 files changed, 841 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
 create mode 100644 arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts