mbox series

[V2,RESEND,0/3] Input: elantech - Fix incorrectly halved touchpad range on ELAN v3 touchpads

Message ID 20230308131307.13832-1-nyanpasu256@gmail.com
Headers
Series Input: elantech - Fix incorrectly halved touchpad range on ELAN v3 touchpads |

Message

Eirin Nya March 8, 2023, 1:13 p.m. UTC 
  On Linux 6.1.15, on my laptop (Dell Inspiron 15R SE 7520) with an Elan
v3 touchpad, the reported size of my touchpad (1470 by 700) is half that
of the actual touch range (2940 by 1400), and the upper half of my
touchpad reports negative values. As a result, with the Synaptics or
libinput X11 driver set to edge scrolling mode, the entire right half of
my touchpad has x-values past evdev's reported maximum size, and acts as
a giant scrollbar!

The problem is that elantech_setup_ps2() -> elantech_set_absolute_mode()
sets up absolute mode and doubles the hardware resolution (doubling the
hardware's maximum reported x/y coordinates and its response to
ETP_FW_ID_QUERY), *after* elantech_query_info() fetches the touchpad
coordinate system size using ETP_FW_ID_QUERY, which gets cached and
reported to userspace through ioctl(fd, EVIOCGABS(ABS_X/Y), ...). So the
touchpad size reported to userspace (and used to subtract vertical
coordinates from) is half the maximum position of actual touches.

This patch series splits out a function elantech_query_range_v3() which
fetches *only* ETP_FW_ID_QUERY (touchpad size), and calls it a second
time if elantech_set_absolute_mode() enables double-size mode. This
means the first call is redundant and wasted if a second call occurs,
but this minimizes the need to restructure the driver.

A possible alternative approach is to restructure the driver and set
resolution before querying touchpad size. I did not attempt this myself,
and don't know how the Windows Dell Touchpad ELAN driver handles
double-resolution. See
https://lore.kernel.org/linux-input/20221008093437.72d0f6b0@dell-void.nyanpasu256.gmail.com.beta.tailscale.net/
for discussion.

Changes in v2:
- Fix commit summaries
- Add "Fixes:" tag holding commit that introduced bug

Tested on 6.1.15, rebased and built on dtor/next
d5f7638eb5fed0eb12e45a127764c4111b11c50e (though against 6.1.15 headers,
and the resulting binaries were not tested). The files changed
(drivers/input/mouse/elantech.c/h) have not been modified since 2021.

Link: https://lore.kernel.org/linux-input/CAL57YxZNutUVxBtvbVWKMw-V2kqeVB5kTQ5BFdJmN=mdPq8Q8Q@mail.gmail.com/
Link v1: https://lore.kernel.org/linux-input/20220929082119.22112-1-nyanpasu256@gmail.com/
Link v2: https://lore.kernel.org/linux-input/20221014111533.908-1-nyanpasu256@gmail.com/

Eirin Nya (3):
  Input: elantech - Remove redundant field elantech_data::y_max
  Input: elantech - Remove redundant field elantech_data::width
  Input: elantech - Fix incorrectly halved touchpad range on ELAN v3
    touchpads

 drivers/input/mouse/elantech.c | 51 +++++++++++++++++++++++-----------
 drivers/input/mouse/elantech.h |  2 --
 2 files changed, 35 insertions(+), 18 deletions(-)


base-commit: d5f7638eb5fed0eb12e45a127764c4111b11c50e