mbox series

[V5,0/3] AM68 SK: Add initial support

Message ID 20230116071446.28867-1-sinthu.raja@ti.com
Headers
Series AM68 SK: Add initial support |

Message

Sinthu Raja Jan. 16, 2023, 7:14 a.m. UTC 
  From: Sinthu Raja <sinthu.raja@ti.com>

Hi All,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s AM68 SoC.

Refer below link to AM68 Technical Reference Manual for further details: 
http://www.ti.com/lit/pdf/spruj28

Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Changes in V5:
=============
Address review comments:
- Remove the unessential comment.
- Remove alignment property from secure-ddr node, as no memory is allocated out
  of this region.

Changes in V4:
=============
Repost after rebasing to 6.2 rc1

Changes in  V3:
==============
Address all the review comments and the changes are captured in separate patches.
 - Remove the unused nodes that are disabled by default.
 - Update the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".

V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@ti.com/
V3: https://lore.kernel.org/lkml/20230110110052.14851-1-sinthu.raja@ti.com/
V4: https://lore.kernel.org/lkml/20230105151740.29436-1-sinthu.raja@ti.com/

Sinthu Raja (3):
  dt-bindings: arm: ti: Add binding for AM68 SK
  arm64: dts: ti: Add initial support for AM68 SK System on Module
  arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 335 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi    |  29 ++
 4 files changed, 367 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi

Comments

Neha Malcom Francis Jan. 16, 2023, 11:17 a.m. UTC | #1 
Hi Sinthu

On 16/01/23 12:44, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
> 
> Hi All,
> This series of patches add support for AM68 Starter kit(SK). AM68 SK
> is a low cost, small form factor board designed for TI’s AM68 SoC.
> 
> Refer below link to AM68 Technical Reference Manual for further details:
> http://www.ti.com/lit/pdf/spruj28
> 
> Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
> 
> Changes in V5:
> =============
> Address review comments:
> - Remove the unessential comment.
> - Remove alignment property from secure-ddr node, as no memory is allocated out
>    of this region.
> 
> Changes in V4:
> =============
> Repost after rebasing to 6.2 rc1
> 
> Changes in  V3:
> ==============
> Address all the review comments and the changes are captured in separate patches.
>   - Remove the unused nodes that are disabled by default.
>   - Update the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".
> 
> V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
> V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@ti.com/
> V3: https://lore.kernel.org/lkml/20230110110052.14851-1-sinthu.raja@ti.com/
> V4: https://lore.kernel.org/lkml/20230105151740.29436-1-sinthu.raja@ti.com/
> 
> Sinthu Raja (3):
>    dt-bindings: arm: ti: Add binding for AM68 SK
>    arm64: dts: ti: Add initial support for AM68 SK System on Module
>    arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
> 
>   .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
>   arch/arm64/boot/dts/ti/Makefile               |   2 +
>   .../boot/dts/ti/k3-am68-sk-base-board.dts     | 335 ++++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi    |  29 ++
>   4 files changed, 367 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
> 

For the series:

Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Vignesh Raghavendra Jan. 23, 2023, 5:39 p.m. UTC | #2 
Hi Sinthu Raja,

On Mon, 16 Jan 2023 12:44:43 +0530, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
> 
> Hi All,
> This series of patches add support for AM68 Starter kit(SK). AM68 SK
> is a low cost, small form factor board designed for TI’s AM68 SoC.
> 
> Refer below link to AM68 Technical Reference Manual for further details:
> http://www.ti.com/lit/pdf/spruj28
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/3] dt-bindings: arm: ti: Add binding for AM68 SK
      commit: 73b1c4f5f53e531f75d4b65dec4784cf67e685f2
[2/3] arm64: dts: ti: Add initial support for AM68 SK System on Module
      commit: 2b6277b76d42cbb781c558ea982e23cd770dd363
[3/3] arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
      commit: a266c180b398eab5030bdcf2d1bbdc62fb7fc9c1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh