[v2,0/8] arm64/ftrace: Add support for DYNAMIC_FTRACE_WITH_CALL_OPS

  This series adds a new DYNAMIC_FTRACE_WITH_CALL_OPS mechanism, and
enables support for this on arm64. This significantly reduces the
overhead of tracing when a callsite/tracee has a single associated
tracer, avoids a number of issues that make it undesireably and
infeasible to use dynamically-allocated trampolines (e.g. branch range
limitations), and makes it possible to implement support for
DYNAMIC_FTRACE_WITH_DIRECT_CALLS in future.

The main idea is to give each ftrace callsite an associated pointer to
an ftrace_ops. The architecture's ftrace_caller trampoline can recover
the ops pointer and invoke ops->func from this without needing to use
ftrace_ops_list_func, which has to iterate through all registered ops.

To make this work, we use -fpatchable-function-entry=M,N, there N NOPs
are placed before the function entry point. On arm64 NOPs are always 4
bytes, so by allocating 2 per-function NOPs, we have enough space to
place a 64-bit value. So that we can manipulate the pointer atomically,
we need to align instrumented functions to at least 8 bytes, which we
can ensure using -falign-functions=8.

Each callsite ends up looking like:

	# Aligned to 8 bytes
	func - 8:
		< pointer to ops >
	func:
		BTI		// optional
		MOV	X9, LR
		NOP		// patched to `BL ftrace_caller`
	func_body:

When entering ftrace_caller, the LR points at func_body, and the
ftrace_ops can be recovered at a negative offset from this the LR value:

	BIC	<tmp>, LR, 0x7		// Align down (skips BTI)
	LDR	<tmp>, [<tmp>, #-16]	// load ops pointer

The ftrace_ops::func (and any other ftrace_ops fields) can then be
recovered from this pointer to the ops.

The first three patches enable the function alignment, working around
cases where GCC drops alignment for cold functions or when building with
'-Os'.

The final four patches implement support for
DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. As noted in the final patch, this
results in a significant reduction in overhead:

  Before this series:

  Number of tracers     || Total time  | Per-call average time (ns)
  Relevant | Irrelevant || (ns)        | Total        | Overhead
  =========+============++=============+==============+============
         0 |          0 ||      94,583 |         0.95 |           -
         0 |          1 ||      93,709 |         0.94 |           -
         0 |          2 ||      93,666 |         0.94 |           -
         0 |         10 ||      93,709 |         0.94 |           -
         0 |        100 ||      93,792 |         0.94 |           -
  ---------+------------++-------------+--------------+------------
         1 |          1 ||   6,467,833 |        64.68 |       63.73
         1 |          2 ||   7,509,708 |        75.10 |       74.15
         1 |         10 ||  23,786,792 |       237.87 |      236.92
         1 |        100 || 106,432,500 |     1,064.43 |     1063.38
  ---------+------------++-------------+--------------+------------
         1 |          0 ||   1,431,875 |        14.32 |       13.37
         2 |          0 ||   6,456,334 |        64.56 |       63.62
        10 |          0 ||  22,717,000 |       227.17 |      226.22
       100 |          0 || 103,293,667 |      1032.94 |     1031.99
  ---------+------------++-------------+--------------+--------------

  Note: per-call overhead is estiamated relative to the baseline case
  with 0 relevant tracers and 0 irrelevant tracers.

  After this series:

  Number of tracers     || Total time  | Per-call average time (ns)
  Relevant | Irrelevant || (ns)        | Total        | Overhead
  =========+============++=============+==============+============
         0 |          0 ||      94,541 |         0.95 |           -
         0 |          1 ||      93,666 |         0.94 |           -
         0 |          2 ||      93,709 |         0.94 |           -
         0 |         10 ||      93,667 |         0.94 |           -
         0 |        100 ||      93,792 |         0.94 |           -
  ---------+------------++-------------+--------------+------------
         1 |          1 ||     281,000 |         2.81 |        1.86
         1 |          2 ||     281,042 |         2.81 |        1.87
         1 |         10 ||     280,958 |         2.81 |        1.86
         1 |        100 ||     281,250 |         2.81 |        1.87
  ---------+------------++-------------+--------------+------------
         1 |          0 ||     280,959 |         2.81 |        1.86
         2 |          0 ||   6,502,708 |        65.03 |       64.08
        10 |          0 ||  18,681,209 |       186.81 |      185.87
       100 |          0 || 103,550,458 |     1,035.50 |     1034.56
  ---------+------------++-------------+--------------+------------

  Note: per-call overhead is estiamated relative to the baseline case
  with 0 relevant tracers and 0 irrelevant tracers.


This version of the series can be found in my kernel.org git repo:

  git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git

Tagged as:

  arm64-ftrace-per-callsite-ops-20230113

Since v1 [1]:
* Fold in Ack from Rafael
* Update comments/commits with description of the GCC issue
* Move the cold attribute changes to compiler_types.h
* Drop the unnecessary changes to the weak attribute
* Move declaration of ftrace_ops earlier
* Clean up and improve commit messages
* Regenerate statistics on misaligned text symbols

[1] https://lore.kernel.org/linux-arm-kernel/20230109135828.879136-1-mark.rutland@arm.com/

Thanks,
Mark.

Mark Rutland (8):
  Compiler attributes: GCC cold function alignment workarounds
  ACPI: Don't build ACPICA with '-Os'
  arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT
  ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
  arm64: insn: Add helpers for BTI
  arm64: patching: Add aarch64_insn_write_literal_u64()
  arm64: ftrace: Update stale comment
  arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS

 arch/arm64/Kconfig                  |   3 +
 arch/arm64/Makefile                 |   5 +-
 arch/arm64/include/asm/ftrace.h     |  15 +--
 arch/arm64/include/asm/insn.h       |   1 +
 arch/arm64/include/asm/linkage.h    |  10 +-
 arch/arm64/include/asm/patching.h   |   2 +
 arch/arm64/kernel/asm-offsets.c     |   4 +
 arch/arm64/kernel/entry-ftrace.S    |  32 +++++-
 arch/arm64/kernel/ftrace.c          | 158 +++++++++++++++++++++++++++-
 arch/arm64/kernel/patching.c        |  17 +++
 drivers/acpi/acpica/Makefile        |   2 +-
 include/linux/compiler_attributes.h |   6 --
 include/linux/compiler_types.h      |  27 +++++
 include/linux/ftrace.h              |  18 +++-
 kernel/exit.c                       |   9 +-
 kernel/trace/Kconfig                |   7 ++
 kernel/trace/ftrace.c               | 109 ++++++++++++++++++-
 17 files changed, 385 insertions(+), 40 deletions(-)