mbox series

[v1,0/5] Unify USB Over Current Settings on Toradex Boards

Message ID 20221122155439.456142-1-dev@pschenker.ch
Headers
Series Unify USB Over Current Settings on Toradex Boards |

Message

Philippe Schenker Nov. 22, 2022, 3:54 p.m. UTC 
  From: Philippe Schenker <philippe.schenker@toradex.com>


This patchset intends to disable the USB Over Current for Toradex i.MX
boards using the USB chipidea driver.

We do this on the Carrier-Board device-trees due to the reason, that if
a customer of us inheriting the module-level device-tree (named -.dtsi)
does not inherit settings from us that may be incorrect for his
use-case.


Philippe Schenker (5):
  ARM: dts: apalis-imx6: Disable usb over-current
  ARM: dts: colibri-imx6: Disable usb over-current
  ARM: dts: colibri-imx6ull: Disable usb over-current
  ARM: dts: colibri-imx7: Disable usb over-current
  arm64: dts: verdin-imx8mm: Disable usb over-current

 arch/arm/boot/dts/imx6dl-colibri-aster.dts              | 2 ++
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts            | 2 ++
 arch/arm/boot/dts/imx6dl-colibri-iris.dts               | 2 ++
 arch/arm/boot/dts/imx6q-apalis-eval.dts                 | 2 ++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts           | 2 ++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts                | 2 ++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi                   | 1 -
 arch/arm/boot/dts/imx6qdl-colibri.dtsi                  | 1 -
 arch/arm/boot/dts/imx6ull-colibri-aster.dtsi            | 2 ++
 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi          | 2 ++
 arch/arm/boot/dts/imx6ull-colibri-iris.dtsi             | 2 ++
 arch/arm/boot/dts/imx7-colibri-aster.dtsi               | 1 +
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi             | 1 +
 arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi             | 1 +
 arch/arm/boot/dts/imx7-colibri-iris.dtsi                | 1 +
 arch/arm/boot/dts/imx7d-colibri-aster.dts               | 1 +
 arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts          | 1 +
 arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts        | 1 +
 arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts        | 1 +
 arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts           | 1 +
 arch/arm/boot/dts/imx7d-colibri-emmc.dtsi               | 1 +
 arch/arm/boot/dts/imx7d-colibri-eval-v3.dts             | 1 +
 arch/arm/boot/dts/imx7d-colibri-iris-v2.dts             | 1 +
 arch/arm/boot/dts/imx7d-colibri-iris.dts                | 1 +
 arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi | 2 ++
 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi        | 2 --
 26 files changed, 33 insertions(+), 4 deletions(-)

Comments

Shawn Guo Dec. 31, 2022, 7:39 a.m. UTC | #1 
On Tue, Nov 22, 2022 at 04:54:33PM +0100, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
> 
> 
> This patchset intends to disable the USB Over Current for Toradex i.MX
> boards using the USB chipidea driver.
> 
> We do this on the Carrier-Board device-trees due to the reason, that if
> a customer of us inheriting the module-level device-tree (named -.dtsi)
> does not inherit settings from us that may be incorrect for his
> use-case.
> 
> 
> Philippe Schenker (5):
>   ARM: dts: apalis-imx6: Disable usb over-current
>   ARM: dts: colibri-imx6: Disable usb over-current
>   ARM: dts: colibri-imx6ull: Disable usb over-current
>   ARM: dts: colibri-imx7: Disable usb over-current
>   arm64: dts: verdin-imx8mm: Disable usb over-current

Applied all, thanks!