[v3,0/2] Add support for the AD5754 DAC

Message ID 20221118172407.765423-1-ciprian.regus@analog.com
Headers
Series Add support for the AD5754 DAC |

Message

Ciprian Regus Nov. 18, 2022, 5:24 p.m. UTC
  These patches implement support for the AD5754 DAC (both dual
and quad channel variants).

The AD5724/AD5734/AD5754 are quad, 12-/14-/16-bit, serial
input, voltage output DACs. The devices operate from single-
supply voltages from +4.5 V up to +16.5 V or dual-supply
voltages from ±4.5 V up to ±16.5 V. The input coding is
user-selectable twos complement or offset binary for a bipolar
output (depending on the state of Pin BIN/2sComp), and straight
binary for a unipolar output.

Ciprian Regus (2):
  dt-bindings: iio: dac: add adi,ad5754.yaml
  drivers: iio: dac: Add AD5754 DAC driver

 .../bindings/iio/dac/adi,ad5754.yaml          | 181 +++++
 MAINTAINERS                                   |   8 +
 drivers/iio/dac/Kconfig                       |  12 +
 drivers/iio/dac/Makefile                      |   1 +
 drivers/iio/dac/ad5754.c                      | 672 ++++++++++++++++++
 5 files changed, 874 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5754.yaml
 create mode 100644 drivers/iio/dac/ad5754.c