[v10,0/7] Wave5 codec driver

  The Wave5 codec driver is a stateful encoder/decoder.
It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc.
But current test report is based on J721S2 SoC and pre-silicon FPGA.

The driver currently supports V4L2_PIX_FMT_HEVC, V4L2_PIX_FMT_H264.

This driver has so far been tested on J721S2 EVM board and pre-silicon
FPGA.

Testing on J721S2 EVM board shows it working fine both decoder and
encoder.
The driver is successfully working with gstreamer v4l2 good-plugin
without any modification.

# v4l2-compliance -d0
Total for wave5-dec device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0

# v4l2-compliance -d1
Buffer ioctls:
		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(610): q.reqbufs(node, 1)
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(753): q.reqbufs(node, 2)
	test VIDIOC_EXPBUF: FAIL
	test Requests: OK (Not Supported)

Total for wave5-enc device /dev/video1: 44, Succeeded: 42, Failed: 2, Warnings: 2

changes since v9:

* Move from staging to the media directory
  * Move coda driver to sub-directory

* Fixes:
  * Use platform_get_irq instead of platform_get_resource to fetch the IRQ

* General cleanups:
  * Add missing error messages to error conditions
  * Improve messages/variable names/comments, align parameter names across the driver
  * Use macros instead of magic numbers in multiple occassions
  * Reduce code duplication in multiple places
  * Fix whitespace, newline and tab alignment issues
  * Remove unused struct fields & commented out code
  * Convert signed integers to unsigned if signed is not necessary
  * Convert int/unsigned int to s32/u32, when the variable is assigned to the
    return of a register read or provided as a parameter for a register write
    (and vice versa)
  * Fix incorrect bitwise operators where logical operators are appropriate
  * Multiple smaller changes

* Generalization:
  * Add new helper file providing generalized routines for vpu-dec & vpu-enc
  * Generalize luma & chroma table size calculation and stride calculation

* Resource cleanup and error handling:
  * Add error handling to all calls with ignored return codes
  * Handle DMA resource cleanup properly
  * Fix insufficient instance cleanup while opening dec/enc

changes since v8:

* add 'wave5' to DEV_NAME
* update to support Multi-stream
* update to support loop test/dynamic resolution change
* remove unnecessary memset, g_volatile, old version option

changes since v7:

* update v4l2-compliance test report
* fix build error on linux-kernel 5.18.0-rc4

changes since v6:

* update TODO file
* get sram info from device tree

changes since v5:

* support NV12/NV21 pixelformat for encoder and decoder
* handle adnormal exit and EOS

changes since v4:

* refactor functions in wave5-hw and fix bug reported by Daniel Palmer
* rename functions and variables to better names
* change variable types such as replacing s32 with u32 and int with bool
* as appropriate

changes since v3:

* Fixing all issues commented by Dan Carpenter
* Change file names to have wave5- prefix
* In wave5_vpu_probe, enable the clocks before reading registers, as
* commented from Daniel Palmer
* Add more to the TODO list,

changes since v2:

Main fixes includes:
* change the yaml and dirver code to support up to 4 clks (instead of
* one)
* fix Kconfig format
* remove unneeded cast,
* change var types
* change var names, func names
* checkpatch fixes

changes since v1:

Fix changes due to comments from Ezequiel and Dan Carpenter. Main fixes
inclueds:
* move all files to one dir 'wave5'
* replace private error codes with standard error codes
* fix extra spaces
* various checkpatch fixes
* replace private 'DPRINTK' macro with standard 'dev_err/dbg ..'
* fix error handling
* add more possible fixes to the TODO file

Dafna Hirschfeld (1):
  media: chips-media: wave5: Add the vdi layer

Nas Chung (3):
  media: chips-media: wave5: Add vpuapi layer
  media: chips-media: wave5: Add the v4l2 layer
  media: chips-media: wave5: Add TODO file

Robert Beckett (2):
  dt-bindings: media: wave5: add yaml devicetree bindings
  media: chips-media: wave5: Add wave5 driver to maintainers file

Sebastian Fricke (1):
  media: platform: chips-media: Move Coda to separate folder

 .../devicetree/bindings/media/wave5.yml       |   73 +
 MAINTAINERS                                   |   11 +-
 drivers/media/platform/chips-media/Kconfig    |   18 +-
 drivers/media/platform/chips-media/Makefile   |    6 +-
 .../media/platform/chips-media/coda/Kconfig   |   18 +
 .../media/platform/chips-media/coda/Makefile  |    6 +
 .../chips-media/{ => coda}/coda-bit.c         |    0
 .../chips-media/{ => coda}/coda-common.c      |    0
 .../chips-media/{ => coda}/coda-gdi.c         |    0
 .../chips-media/{ => coda}/coda-h264.c        |    0
 .../chips-media/{ => coda}/coda-jpeg.c        |    0
 .../chips-media/{ => coda}/coda-mpeg2.c       |    0
 .../chips-media/{ => coda}/coda-mpeg4.c       |    0
 .../platform/chips-media/{ => coda}/coda.h    |    0
 .../chips-media/{ => coda}/coda_regs.h        |    0
 .../chips-media/{ => coda}/imx-vdoa.c         |    0
 .../chips-media/{ => coda}/imx-vdoa.h         |    0
 .../platform/chips-media/{ => coda}/trace.h   |    0
 .../media/platform/chips-media/wave5/Kconfig  |   12 +
 .../media/platform/chips-media/wave5/Makefile |   10 +
 drivers/media/platform/chips-media/wave5/TODO |   25 +
 .../platform/chips-media/wave5/wave5-helper.c |  175 +
 .../platform/chips-media/wave5/wave5-helper.h |   28 +
 .../platform/chips-media/wave5/wave5-hw.c     | 3459 +++++++++++++++++
 .../chips-media/wave5/wave5-regdefine.h       |  654 ++++
 .../platform/chips-media/wave5/wave5-vdi.c    |  261 ++
 .../platform/chips-media/wave5/wave5-vdi.h    |   67 +
 .../chips-media/wave5/wave5-vpu-dec.c         | 1399 +++++++
 .../chips-media/wave5/wave5-vpu-enc.c         | 1454 +++++++
 .../platform/chips-media/wave5/wave5-vpu.c    |  362 ++
 .../platform/chips-media/wave5/wave5-vpu.h    |   72 +
 .../platform/chips-media/wave5/wave5-vpuapi.c | 1115 ++++++
 .../platform/chips-media/wave5/wave5-vpuapi.h | 1198 ++++++
 .../chips-media/wave5/wave5-vpuconfig.h       |   90 +
 .../chips-media/wave5/wave5-vpuerror.h        |  454 +++
 .../media/platform/chips-media/wave5/wave5.h  |   94 +
 36 files changed, 11040 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/wave5.yml
 create mode 100644 drivers/media/platform/chips-media/coda/Kconfig
 create mode 100644 drivers/media/platform/chips-media/coda/Makefile
 rename drivers/media/platform/chips-media/{ => coda}/coda-bit.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-common.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-gdi.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-h264.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-jpeg.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg2.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg4.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda.h (100%)
 rename drivers/media/platform/chips-media/{ => coda}/coda_regs.h (100%)
 rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.c (100%)
 rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.h (100%)
 rename drivers/media/platform/chips-media/{ => coda}/trace.h (100%)
 create mode 100644 drivers/media/platform/chips-media/wave5/Kconfig
 create mode 100644 drivers/media/platform/chips-media/wave5/Makefile
 create mode 100644 drivers/media/platform/chips-media/wave5/TODO
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-hw.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-regdefine.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuconfig.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuerror.h
 create mode 100644 drivers/media/platform/chips-media/wave5/wave5.h
  

On 02:04-20221022, Sebastian Fricke wrote:
> The Wave5 codec driver is a stateful encoder/decoder.
> It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc.
> But current test report is based on J721S2 SoC and pre-silicon FPGA.
> 
> The driver currently supports V4L2_PIX_FMT_HEVC, V4L2_PIX_FMT_H264.
> 
> This driver has so far been tested on J721S2 EVM board and pre-silicon
> FPGA.
> 
> Testing on J721S2 EVM board shows it working fine both decoder and
> encoder.
> The driver is successfully working with gstreamer v4l2 good-plugin
> without any modification.
> 
> # v4l2-compliance -d0
> Total for wave5-dec device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0
> 
> # v4l2-compliance -d1
> Buffer ioctls:
> 		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(610): q.reqbufs(node, 1)
> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> 		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(753): q.reqbufs(node, 2)
> 	test VIDIOC_EXPBUF: FAIL
> 	test Requests: OK (Not Supported)
> 
> Total for wave5-enc device /dev/video1: 44, Succeeded: 42, Failed: 2, Warnings: 2
> 
> changes since v9:
> 
> * Move from staging to the media directory
>   * Move coda driver to sub-directory
> 
> * Fixes:
>   * Use platform_get_irq instead of platform_get_resource to fetch the IRQ
> 
> * General cleanups:
>   * Add missing error messages to error conditions
>   * Improve messages/variable names/comments, align parameter names across the driver
>   * Use macros instead of magic numbers in multiple occassions
>   * Reduce code duplication in multiple places
>   * Fix whitespace, newline and tab alignment issues
>   * Remove unused struct fields & commented out code
>   * Convert signed integers to unsigned if signed is not necessary
>   * Convert int/unsigned int to s32/u32, when the variable is assigned to the
>     return of a register read or provided as a parameter for a register write
>     (and vice versa)
>   * Fix incorrect bitwise operators where logical operators are appropriate
>   * Multiple smaller changes
> 
> * Generalization:
>   * Add new helper file providing generalized routines for vpu-dec & vpu-enc
>   * Generalize luma & chroma table size calculation and stride calculation
> 
> * Resource cleanup and error handling:
>   * Add error handling to all calls with ignored return codes
>   * Handle DMA resource cleanup properly
>   * Fix insufficient instance cleanup while opening dec/enc
> 
> changes since v8:
> 
> * add 'wave5' to DEV_NAME
> * update to support Multi-stream
> * update to support loop test/dynamic resolution change
> * remove unnecessary memset, g_volatile, old version option
> 
> changes since v7:
> 
> * update v4l2-compliance test report
> * fix build error on linux-kernel 5.18.0-rc4
> 
> changes since v6:
> 
> * update TODO file
> * get sram info from device tree
> 
> changes since v5:
> 
> * support NV12/NV21 pixelformat for encoder and decoder
> * handle adnormal exit and EOS
> 
> changes since v4:
> 
> * refactor functions in wave5-hw and fix bug reported by Daniel Palmer
> * rename functions and variables to better names
> * change variable types such as replacing s32 with u32 and int with bool
> * as appropriate
> 
> changes since v3:
> 
> * Fixing all issues commented by Dan Carpenter
> * Change file names to have wave5- prefix
> * In wave5_vpu_probe, enable the clocks before reading registers, as
> * commented from Daniel Palmer
> * Add more to the TODO list,
> 
> changes since v2:
> 
> Main fixes includes:
> * change the yaml and dirver code to support up to 4 clks (instead of
> * one)
> * fix Kconfig format
> * remove unneeded cast,
> * change var types
> * change var names, func names
> * checkpatch fixes
> 
> changes since v1:
> 
> Fix changes due to comments from Ezequiel and Dan Carpenter. Main fixes
> inclueds:
> * move all files to one dir 'wave5'
> * replace private error codes with standard error codes
> * fix extra spaces
> * various checkpatch fixes
> * replace private 'DPRINTK' macro with standard 'dev_err/dbg ..'
> * fix error handling
> * add more possible fixes to the TODO file
>

We see issues with the patchset. The decoder output contains garbage
data randomly in the image. This is seen more for higher
resolutions(>=1080p).
The gstreamer pipeline for encoder fails with negotiation error as
stated below.

"vdec 4210000.video-codec: Invalid intra refresh mode: 0 (valid: 1-4)"


> Dafna Hirschfeld (1):
>   media: chips-media: wave5: Add the vdi layer
> 
> Nas Chung (3):
>   media: chips-media: wave5: Add vpuapi layer
>   media: chips-media: wave5: Add the v4l2 layer
>   media: chips-media: wave5: Add TODO file
> 
> Robert Beckett (2):
>   dt-bindings: media: wave5: add yaml devicetree bindings
>   media: chips-media: wave5: Add wave5 driver to maintainers file
> 
> Sebastian Fricke (1):
>   media: platform: chips-media: Move Coda to separate folder
> 
>  .../devicetree/bindings/media/wave5.yml       |   73 +
>  MAINTAINERS                                   |   11 +-
>  drivers/media/platform/chips-media/Kconfig    |   18 +-
>  drivers/media/platform/chips-media/Makefile   |    6 +-
>  .../media/platform/chips-media/coda/Kconfig   |   18 +
>  .../media/platform/chips-media/coda/Makefile  |    6 +
>  .../chips-media/{ => coda}/coda-bit.c         |    0
>  .../chips-media/{ => coda}/coda-common.c      |    0
>  .../chips-media/{ => coda}/coda-gdi.c         |    0
>  .../chips-media/{ => coda}/coda-h264.c        |    0
>  .../chips-media/{ => coda}/coda-jpeg.c        |    0
>  .../chips-media/{ => coda}/coda-mpeg2.c       |    0
>  .../chips-media/{ => coda}/coda-mpeg4.c       |    0
>  .../platform/chips-media/{ => coda}/coda.h    |    0
>  .../chips-media/{ => coda}/coda_regs.h        |    0
>  .../chips-media/{ => coda}/imx-vdoa.c         |    0
>  .../chips-media/{ => coda}/imx-vdoa.h         |    0
>  .../platform/chips-media/{ => coda}/trace.h   |    0
>  .../media/platform/chips-media/wave5/Kconfig  |   12 +
>  .../media/platform/chips-media/wave5/Makefile |   10 +
>  drivers/media/platform/chips-media/wave5/TODO |   25 +
>  .../platform/chips-media/wave5/wave5-helper.c |  175 +
>  .../platform/chips-media/wave5/wave5-helper.h |   28 +
>  .../platform/chips-media/wave5/wave5-hw.c     | 3459 +++++++++++++++++
>  .../chips-media/wave5/wave5-regdefine.h       |  654 ++++
>  .../platform/chips-media/wave5/wave5-vdi.c    |  261 ++
>  .../platform/chips-media/wave5/wave5-vdi.h    |   67 +
>  .../chips-media/wave5/wave5-vpu-dec.c         | 1399 +++++++
>  .../chips-media/wave5/wave5-vpu-enc.c         | 1454 +++++++
>  .../platform/chips-media/wave5/wave5-vpu.c    |  362 ++

io.h is needed for devm_ioremap to work.

>  .../platform/chips-media/wave5/wave5-vpu.h    |   72 +
>  .../platform/chips-media/wave5/wave5-vpuapi.c | 1115 ++++++
>  .../platform/chips-media/wave5/wave5-vpuapi.h | 1198 ++++++
>  .../chips-media/wave5/wave5-vpuconfig.h       |   90 +
>  .../chips-media/wave5/wave5-vpuerror.h        |  454 +++
>  .../media/platform/chips-media/wave5/wave5.h  |   94 +
>  36 files changed, 11040 insertions(+), 21 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/wave5.yml
>  create mode 100644 drivers/media/platform/chips-media/coda/Kconfig
>  create mode 100644 drivers/media/platform/chips-media/coda/Makefile
>  rename drivers/media/platform/chips-media/{ => coda}/coda-bit.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-common.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-gdi.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-h264.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-jpeg.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg2.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg4.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda.h (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/coda_regs.h (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.c (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.h (100%)
>  rename drivers/media/platform/chips-media/{ => coda}/trace.h (100%)
>  create mode 100644 drivers/media/platform/chips-media/wave5/Kconfig
>  create mode 100644 drivers/media/platform/chips-media/wave5/Makefile
>  create mode 100644 drivers/media/platform/chips-media/wave5/TODO
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-hw.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-regdefine.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuconfig.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuerror.h
>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5.h
> 
> -- 
> 2.25.1
>
  

Hey Prasanth,

Thanks for taking a look.

On 31.10.2022 23:52, Prasanth Mantena wrote:
>On 02:04-20221022, Sebastian Fricke wrote:
>> The Wave5 codec driver is a stateful encoder/decoder.
>> It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc.
>> But current test report is based on J721S2 SoC and pre-silicon FPGA.
>>
>> The driver currently supports V4L2_PIX_FMT_HEVC, V4L2_PIX_FMT_H264.
>>
>> This driver has so far been tested on J721S2 EVM board and pre-silicon
>> FPGA.
>>
>> Testing on J721S2 EVM board shows it working fine both decoder and
>> encoder.
>> The driver is successfully working with gstreamer v4l2 good-plugin
>> without any modification.
>>
>> # v4l2-compliance -d0
>> Total for wave5-dec device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0
>>
>> # v4l2-compliance -d1
>> Buffer ioctls:
>> 		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(610): q.reqbufs(node, 1)
>> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
>> 		fail: ../../../v4l-utils-1.18.1/utils/v4l2-compliance/v4l2-test-buffers.cpp(753): q.reqbufs(node, 2)
>> 	test VIDIOC_EXPBUF: FAIL
>> 	test Requests: OK (Not Supported)
>>
>> Total for wave5-enc device /dev/video1: 44, Succeeded: 42, Failed: 2, Warnings: 2
>>
>> changes since v9:
>>
>> * Move from staging to the media directory
>>   * Move coda driver to sub-directory
>>
>> * Fixes:
>>   * Use platform_get_irq instead of platform_get_resource to fetch the IRQ
>>
>> * General cleanups:
>>   * Add missing error messages to error conditions
>>   * Improve messages/variable names/comments, align parameter names across the driver
>>   * Use macros instead of magic numbers in multiple occassions
>>   * Reduce code duplication in multiple places
>>   * Fix whitespace, newline and tab alignment issues
>>   * Remove unused struct fields & commented out code
>>   * Convert signed integers to unsigned if signed is not necessary
>>   * Convert int/unsigned int to s32/u32, when the variable is assigned to the
>>     return of a register read or provided as a parameter for a register write
>>     (and vice versa)
>>   * Fix incorrect bitwise operators where logical operators are appropriate
>>   * Multiple smaller changes
>>
>> * Generalization:
>>   * Add new helper file providing generalized routines for vpu-dec & vpu-enc
>>   * Generalize luma & chroma table size calculation and stride calculation
>>
>> * Resource cleanup and error handling:
>>   * Add error handling to all calls with ignored return codes
>>   * Handle DMA resource cleanup properly
>>   * Fix insufficient instance cleanup while opening dec/enc
>>
>> changes since v8:
>>
>> * add 'wave5' to DEV_NAME
>> * update to support Multi-stream
>> * update to support loop test/dynamic resolution change
>> * remove unnecessary memset, g_volatile, old version option
>>
>> changes since v7:
>>
>> * update v4l2-compliance test report
>> * fix build error on linux-kernel 5.18.0-rc4
>>
>> changes since v6:
>>
>> * update TODO file
>> * get sram info from device tree
>>
>> changes since v5:
>>
>> * support NV12/NV21 pixelformat for encoder and decoder
>> * handle adnormal exit and EOS
>>
>> changes since v4:
>>
>> * refactor functions in wave5-hw and fix bug reported by Daniel Palmer
>> * rename functions and variables to better names
>> * change variable types such as replacing s32 with u32 and int with bool
>> * as appropriate
>>
>> changes since v3:
>>
>> * Fixing all issues commented by Dan Carpenter
>> * Change file names to have wave5- prefix
>> * In wave5_vpu_probe, enable the clocks before reading registers, as
>> * commented from Daniel Palmer
>> * Add more to the TODO list,
>>
>> changes since v2:
>>
>> Main fixes includes:
>> * change the yaml and dirver code to support up to 4 clks (instead of
>> * one)
>> * fix Kconfig format
>> * remove unneeded cast,
>> * change var types
>> * change var names, func names
>> * checkpatch fixes
>>
>> changes since v1:
>>
>> Fix changes due to comments from Ezequiel and Dan Carpenter. Main fixes
>> inclueds:
>> * move all files to one dir 'wave5'
>> * replace private error codes with standard error codes
>> * fix extra spaces
>> * various checkpatch fixes
>> * replace private 'DPRINTK' macro with standard 'dev_err/dbg ..'
>> * fix error handling
>> * add more possible fixes to the TODO file
>>
>
>We see issues with the patchset. The decoder output contains garbage
>data randomly in the image. This is seen more for higher
>resolutions(>=1080p).

Thanks for the highlight, I am currently debugging that issue as well as
an issue found with the encoder, which seems to be present since V9.
I'll try to keep you updated but currently I am not finished with
isolating the issue.

>The gstreamer pipeline for encoder fails with negotiation error as
>stated below.
>
>"vdec 4210000.video-codec: Invalid intra refresh mode: 0 (valid: 1-4)"

Yes, I have noticed this issue as well and it as already fixed in my
local tree, this was a refactoring error.

>
>
>> Dafna Hirschfeld (1):
>>   media: chips-media: wave5: Add the vdi layer
>>
>> Nas Chung (3):
>>   media: chips-media: wave5: Add vpuapi layer
>>   media: chips-media: wave5: Add the v4l2 layer
>>   media: chips-media: wave5: Add TODO file
>>
>> Robert Beckett (2):
>>   dt-bindings: media: wave5: add yaml devicetree bindings
>>   media: chips-media: wave5: Add wave5 driver to maintainers file
>>
>> Sebastian Fricke (1):
>>   media: platform: chips-media: Move Coda to separate folder
>>
>>  .../devicetree/bindings/media/wave5.yml       |   73 +
>>  MAINTAINERS                                   |   11 +-
>>  drivers/media/platform/chips-media/Kconfig    |   18 +-
>>  drivers/media/platform/chips-media/Makefile   |    6 +-
>>  .../media/platform/chips-media/coda/Kconfig   |   18 +
>>  .../media/platform/chips-media/coda/Makefile  |    6 +
>>  .../chips-media/{ => coda}/coda-bit.c         |    0
>>  .../chips-media/{ => coda}/coda-common.c      |    0
>>  .../chips-media/{ => coda}/coda-gdi.c         |    0
>>  .../chips-media/{ => coda}/coda-h264.c        |    0
>>  .../chips-media/{ => coda}/coda-jpeg.c        |    0
>>  .../chips-media/{ => coda}/coda-mpeg2.c       |    0
>>  .../chips-media/{ => coda}/coda-mpeg4.c       |    0
>>  .../platform/chips-media/{ => coda}/coda.h    |    0
>>  .../chips-media/{ => coda}/coda_regs.h        |    0
>>  .../chips-media/{ => coda}/imx-vdoa.c         |    0
>>  .../chips-media/{ => coda}/imx-vdoa.h         |    0
>>  .../platform/chips-media/{ => coda}/trace.h   |    0
>>  .../media/platform/chips-media/wave5/Kconfig  |   12 +
>>  .../media/platform/chips-media/wave5/Makefile |   10 +
>>  drivers/media/platform/chips-media/wave5/TODO |   25 +
>>  .../platform/chips-media/wave5/wave5-helper.c |  175 +
>>  .../platform/chips-media/wave5/wave5-helper.h |   28 +
>>  .../platform/chips-media/wave5/wave5-hw.c     | 3459 +++++++++++++++++
>>  .../chips-media/wave5/wave5-regdefine.h       |  654 ++++
>>  .../platform/chips-media/wave5/wave5-vdi.c    |  261 ++
>>  .../platform/chips-media/wave5/wave5-vdi.h    |   67 +
>>  .../chips-media/wave5/wave5-vpu-dec.c         | 1399 +++++++
>>  .../chips-media/wave5/wave5-vpu-enc.c         | 1454 +++++++
>>  .../platform/chips-media/wave5/wave5-vpu.c    |  362 ++
>
>io.h is needed for devm_ioremap to work.

Do you mean this?

```
drivers/media/platform/chips-media/wave5/wave5-vpu.c
191:	dev->vdb_register = devm_platform_ioremap_resource(pdev, 0);
192-	if (IS_ERR(dev->vdb_register))
193-		return PTR_ERR(dev->vdb_register);
```

Because there is no `devm_ioremap` function call in the driver.
And the `devm_platform_ioremap_resource`, seems to work just fine.

Any clarification is highly appreciated for this comment.

Sincerely,
Sebastian Fricke

>
>>  .../platform/chips-media/wave5/wave5-vpu.h    |   72 +
>>  .../platform/chips-media/wave5/wave5-vpuapi.c | 1115 ++++++
>>  .../platform/chips-media/wave5/wave5-vpuapi.h | 1198 ++++++
>>  .../chips-media/wave5/wave5-vpuconfig.h       |   90 +
>>  .../chips-media/wave5/wave5-vpuerror.h        |  454 +++
>>  .../media/platform/chips-media/wave5/wave5.h  |   94 +
>>  36 files changed, 11040 insertions(+), 21 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/media/wave5.yml
>>  create mode 100644 drivers/media/platform/chips-media/coda/Kconfig
>>  create mode 100644 drivers/media/platform/chips-media/coda/Makefile
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-bit.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-common.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-gdi.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-h264.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-jpeg.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg2.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda-mpeg4.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda.h (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/coda_regs.h (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.c (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/imx-vdoa.h (100%)
>>  rename drivers/media/platform/chips-media/{ => coda}/trace.h (100%)
>>  create mode 100644 drivers/media/platform/chips-media/wave5/Kconfig
>>  create mode 100644 drivers/media/platform/chips-media/wave5/Makefile
>>  create mode 100644 drivers/media/platform/chips-media/wave5/TODO
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-helper.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-hw.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-regdefine.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vdi.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpu.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuapi.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuconfig.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5-vpuerror.h
>>  create mode 100644 drivers/media/platform/chips-media/wave5/wave5.h
>>
>> --
>> 2.25.1
>>