mbox series

[0/4] Initial OnePlus 3(T) Support

Message ID 20221021142242.129276-1-hpausten@protonmail.com
Headers
Series Initial OnePlus 3(T) Support |

Message

Harry Austen Oct. 21, 2022, 2:23 p.m. UTC 
  This patch series adds support for the OnePlus 3 and OnePlus 3T mobile
phones based on the Qualcomm MSM8996 SoC. Currently includes support for
the following:

- UART console via PCB test pads
- Qualcomm Atheros QCA6174 WiFi and Bluetooth
- NXP TFA9890 Speaker Amplifier
- TI BQ27541 Battery Fuel Gauge
- Synaptics RMI4 Touchscreen
- UFS Storage

Harry Austen (4):
  arm64: dts: qcom: msm8996: standardize blsp indexing
  arm64: boot: dts: msm8996: add blsp1_i2c6 node
  dt-bindings: arm: qcom: add oneplus3(t) devices
  arm64: dts: qcom: msm8996: add support for oneplus3(t)

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../boot/dts/qcom/msm8996-oneplus-common.dtsi | 794 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts |  44 +
 .../arm64/boot/dts/qcom/msm8996-oneplus3t.dts |  45 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  49 +-
 6 files changed, 927 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts

--
2.38.1