mbox series

[00/10] Add support for USB on STM32MP13

Message ID 20221014092651.25202-1-fabrice.gasnier@foss.st.com
Headers
Series Add support for USB on STM32MP13 |

Message

Fabrice Gasnier Oct. 14, 2022, 9:26 a.m. UTC 
  Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
Enable all these interfaces on STM32MP135F-DK board.
Enable the STM32G0 UCSI driver as module.
Dependency on PWR and PMIC regulator is tempoarily managed by using
fixed regulators (resp in the SoC dtsi and the board dts files).
The USB support is functional when these regulators gets enabled at
boot time before entering the kernel.

Amelie Delaunay (5):
  ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
  ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
  ARM: dts: stm32: add USB OTG HS support on stm32mp131
  ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
  ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk

Fabrice Gasnier (5):
  ARM: dts: stm32: add PWR fixed regulators on stm32mp131
  ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
  ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
  ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
  ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules

 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi |  7 ++
 arch/arm/boot/dts/stm32mp131.dtsi        | 81 ++++++++++++++++++++
 arch/arm/boot/dts/stm32mp135f-dk.dts     | 95 ++++++++++++++++++++++++
 arch/arm/configs/multi_v7_defconfig      |  2 +
 4 files changed, 185 insertions(+)

Comments

Fabrice Gasnier Oct. 14, 2022, 2:01 p.m. UTC | #1 
On 10/14/22 11:26, Fabrice Gasnier wrote:
> Add support for USBPHYC, USB Host and USB OTG on STM32MP13.
> Enable all these interfaces on STM32MP135F-DK board.
> Enable the STM32G0 UCSI driver as module.
> Dependency on PWR and PMIC regulator is tempoarily managed by using
> fixed regulators (resp in the SoC dtsi and the board dts files).
> The USB support is functional when these regulators gets enabled at
> boot time before entering the kernel.

Hi,

Please discard this series. Generic node names recommendation has been
missed.
I'll send a V2.

Sorry for the noise.
Best Regards,
Fabrice

> 
> Amelie Delaunay (5):
>   ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
>   ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
>   ARM: dts: stm32: add USB OTG HS support on stm32mp131
>   ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
>   ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
> 
> Fabrice Gasnier (5):
>   ARM: dts: stm32: add PWR fixed regulators on stm32mp131
>   ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
>   ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
>   ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
>   ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
> 
>  arch/arm/boot/dts/stm32mp13-pinctrl.dtsi |  7 ++
>  arch/arm/boot/dts/stm32mp131.dtsi        | 81 ++++++++++++++++++++
>  arch/arm/boot/dts/stm32mp135f-dk.dts     | 95 ++++++++++++++++++++++++
>  arch/arm/configs/multi_v7_defconfig      |  2 +
>  4 files changed, 185 insertions(+)
>