mbox series

[RESEND,v2,0/9] Add pmics supported in Qualcomm's SDX75 platform

Message ID 1691415534-31820-1-git-send-email-quic_rohiagar@quicinc.com
Headers
Series Add pmics supported in Qualcomm's SDX75 platform |

Message

Rohit Agarwal Aug. 7, 2023, 1:38 p.m. UTC 
  Hi,

Changes in v2:
 - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
 - Addressed some minor comments from Konrad to add fixes tag, labels
   and update the labels

This series add support of pmics that are found in SDX75 platform and
add the corresponding regulators in the IDP platform as well.
It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
support for the same pmic chip.
This series is based on the new header inclusion[1] and movement of the
regulators level from rpmpd to rpmhpd[2].
This series can be picked after successfully picking [2] and [3] as [1] has
already been applied.

[1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@quicinc.com/
[2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@quicinc.com/
[3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.


Rohit Agarwal (9):
  dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for
    PM7550BA
  arm64: dts: qcom: sdx75: Add spmi node
  arm64: dts: qcom: Add pinctrl gpio support for pm7250b
  arm64: dts: qcom: Add pm7550ba PMIC dtsi
  arm64: dts: qcom: Add pmx75 PMIC dtsi
  ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
  arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
  arm64: dts: qcom: sdx75: Add rpmhpd node
  arm64: dts: qcom: sdx75-idp: Add regulator nodes

 .../bindings/phy/qcom,snps-eusb2-repeater.yaml     |   7 +-
 arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts          |   2 +-
 arch/arm64/boot/dts/qcom/pm7250b.dtsi              |  10 +
 arch/arm64/boot/dts/qcom/pm7550ba.dtsi             |  70 +++++++
 arch/arm64/boot/dts/qcom/pmx75.dtsi                |  64 ++++++
 arch/arm64/boot/dts/qcom/sdx75-idp.dts             | 230 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdx75.dtsi                |  74 +++++++
 7 files changed, 455 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi

Comments

Konrad Dybcio Aug. 7, 2023, 1:40 p.m. UTC | #1 
On 7.08.2023 15:38, Rohit Agarwal wrote:
> Add SPMI node to SDX75 dtsi.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Konrad Dybcio Aug. 7, 2023, 1:41 p.m. UTC | #2 
On 7.08.2023 15:38, Rohit Agarwal wrote:
> Add dtsi for pmx75 PMIC found in Qualcomm platforms.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Konrad Dybcio Aug. 7, 2023, 1:42 p.m. UTC | #3 
On 7.08.2023 15:38, Rohit Agarwal wrote:
> Update the pmic used in sdx65 platform to pm7250b.
> 
> Fixes: 26380f298b2b (ARM: dts: qcom: sdx65-mtp: Add pmk8350b and pm8150b pmic)
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Vinod Koul Aug. 11, 2023, 8:30 a.m. UTC | #4 
On Mon, 07 Aug 2023 19:08:45 +0530, Rohit Agarwal wrote:
> Changes in v2:
>  - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
>  - Addressed some minor comments from Konrad to add fixes tag, labels
>    and update the labels
> 
> This series add support of pmics that are found in SDX75 platform and
> add the corresponding regulators in the IDP platform as well.
> It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
> support for the same pmic chip.
> This series is based on the new header inclusion[1] and movement of the
> regulators level from rpmpd to rpmhpd[2].
> This series can be picked after successfully picking [2] and [3] as [1] has
> already been applied.
> 
> [...]

Applied, thanks!

[1/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA
      commit: aff7625322ceaf32c930ebf43c75db442067a88d

Best regards,
Bjorn Andersson Aug. 14, 2023, 3:27 a.m. UTC | #5 
On Mon, 07 Aug 2023 19:08:45 +0530, Rohit Agarwal wrote:
> Changes in v2:
>  - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
>  - Addressed some minor comments from Konrad to add fixes tag, labels
>    and update the labels
> 
> This series add support of pmics that are found in SDX75 platform and
> add the corresponding regulators in the IDP platform as well.
> It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
> support for the same pmic chip.
> This series is based on the new header inclusion[1] and movement of the
> regulators level from rpmpd to rpmhpd[2].
> This series can be picked after successfully picking [2] and [3] as [1] has
> already been applied.
> 
> [...]

Applied, thanks!

[6/9] ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
      commit: f636d6c356b339b0d29eed025f8bf9efcb6eb274

Best regards,