xtensa: Optimize boolean evaluation or branching when EQ/NE to zero in S[IF]mode
Checks
Commit Message
This patch optimizes the boolean evaluation of EQ/NE against zero
by adding two insn_and_split patterns similar to SImode conditional
store:
"eq_zero":
op0 = (op1 == 0) ? 1 : 0;
op0 = clz(op1) >> 5; /* optimized (requires TARGET_NSA) */
"movsicc_ne0_reg_0":
op0 = (op1 != 0) ? op2 : 0;
op0 = op2; if (op1 == 0) ? op0 = op1; /* optimized */
These also work in SFmode by ignoring their sign bits, and further-
more, the branch if EQ/NE against zero in SFmode is also done in the
same manner.
The reasons for this optimization in SFmode are:
- Only zero values (negative or non-negative) contain no bits of 1
with both the exponent and the mantissa.
- EQ/NE comparisons involving NaNs produce no signal even if they
are signaling.
- Even if the use of IEEE 754 single-precision floating-point co-
processor is configured (TARGET_HARD_FLOAT is true):
1. Load zero value to FP register
2. Possibly, additional FP move if the comparison target is
an address register
3. FP equality check instruction
4. Read the boolean register containing the result, or condi-
tional branch
As noted above, a considerable number of instructions are still
generated.
gcc/ChangeLog:
* config/xtensa/predicates.md (const_float_0_operand):
Rename from obsolete "const_float_1_operand" and change the
constant to compare.
(cstoresf_cbranchsf_operand, cstoresf_cbranchsf_operator):
New.
* config/xtensa/xtensa.cc (xtensa_expand_conditional_branch):
Add code for EQ/NE comparison with constant zero in SFmode.
(xtensa_expand_scc): Added code to derive boolean evaluation
of EQ/NE with constant zero for comparison in SFmode.
(xtensa_rtx_costs): Change cost of CONST_DOUBLE with value
zero inside "cbranchsf4" to 0.
* config/xtensa/xtensa.md (cbranchsf4, cstoresf4):
Change "match_operator" and the third "match_operand" to the
ones mentioned above.
(movsicc_ne0_reg_zero, eq_zero): New.
---
gcc/config/xtensa/predicates.md | 19 ++++++++++--
gcc/config/xtensa/xtensa.cc | 43 ++++++++++++++++++++++++++
gcc/config/xtensa/xtensa.md | 53 +++++++++++++++++++++++++++++----
3 files changed, 106 insertions(+), 9 deletions(-)
Comments
Hi Suwa-san,
On Sat, Jun 3, 2023 at 2:55 AM Takayuki 'January June' Suwa
<jjsuwa_sys3175@yahoo.co.jp> wrote:
>
> This patch optimizes the boolean evaluation of EQ/NE against zero
> by adding two insn_and_split patterns similar to SImode conditional
> store:
>
> "eq_zero":
> op0 = (op1 == 0) ? 1 : 0;
> op0 = clz(op1) >> 5; /* optimized (requires TARGET_NSA) */
>
> "movsicc_ne0_reg_0":
> op0 = (op1 != 0) ? op2 : 0;
> op0 = op2; if (op1 == 0) ? op0 = op1; /* optimized */
>
> These also work in SFmode by ignoring their sign bits, and further-
> more, the branch if EQ/NE against zero in SFmode is also done in the
> same manner.
>
> The reasons for this optimization in SFmode are:
>
> - Only zero values (negative or non-negative) contain no bits of 1
> with both the exponent and the mantissa.
> - EQ/NE comparisons involving NaNs produce no signal even if they
> are signaling.
> - Even if the use of IEEE 754 single-precision floating-point co-
> processor is configured (TARGET_HARD_FLOAT is true):
> 1. Load zero value to FP register
> 2. Possibly, additional FP move if the comparison target is
> an address register
> 3. FP equality check instruction
> 4. Read the boolean register containing the result, or condi-
> tional branch
> As noted above, a considerable number of instructions are still
> generated.
>
> gcc/ChangeLog:
>
> * config/xtensa/predicates.md (const_float_0_operand):
> Rename from obsolete "const_float_1_operand" and change the
> constant to compare.
> (cstoresf_cbranchsf_operand, cstoresf_cbranchsf_operator):
> New.
> * config/xtensa/xtensa.cc (xtensa_expand_conditional_branch):
> Add code for EQ/NE comparison with constant zero in SFmode.
> (xtensa_expand_scc): Added code to derive boolean evaluation
> of EQ/NE with constant zero for comparison in SFmode.
> (xtensa_rtx_costs): Change cost of CONST_DOUBLE with value
> zero inside "cbranchsf4" to 0.
> * config/xtensa/xtensa.md (cbranchsf4, cstoresf4):
> Change "match_operator" and the third "match_operand" to the
> ones mentioned above.
> (movsicc_ne0_reg_zero, eq_zero): New.
> ---
> gcc/config/xtensa/predicates.md | 19 ++++++++++--
> gcc/config/xtensa/xtensa.cc | 43 ++++++++++++++++++++++++++
> gcc/config/xtensa/xtensa.md | 53 +++++++++++++++++++++++++++++----
> 3 files changed, 106 insertions(+), 9 deletions(-)
This change results in a bunch of new testsuite failures
on configurations without FPU that are all ICEs:
+FAIL: gcc.c-torture/execute/bitfld-3.c -O1 execution test
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O1 (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O1 (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O3 -fomit-frame-pointer
-funroll-loops -fpeel-loops -ftracer -finline-functions (internal
compiler error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O3 -fomit-frame-pointer
-funroll-loops -fpeel-loops -ftracer -finline-functions (test for
excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O3 -g (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O3 -g (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -Os (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -Os (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 -flto
-fno-use-linker-plugin -flto-partition=none (internal compiler error:
in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 -flto
-fno-use-linker-plugin -flto-partition=none (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 -flto
-fuse-linker-plugin -fno-fat-lto-objects (internal compiler error: in
extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-1.c -O2 -flto
-fuse-linker-plugin -fno-fat-lto-objects (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O1 (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O1 (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O3 -fomit-frame-pointer
-funroll-loops -fpeel-loops -ftracer -finline-functions (internal
compiler error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O3 -fomit-frame-pointer
-funroll-loops -fpeel-loops -ftracer -finline-functions (test for
excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O3 -g (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O3 -g (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -Os (internal compiler
error: in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -Os (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 -flto
-fno-use-linker-plugin -flto-partition=none (internal compiler error:
in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 -flto
-fno-use-linker-plugin -flto-partition=none (test for excess errors)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 -flto
-fuse-linker-plugin -fno-fat-lto-objects (internal compiler error: in
extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/c11-atomic-exec-3.c -O2 -flto
-fuse-linker-plugin -fno-fat-lto-objects (test for excess errors)
+FAIL: gcc.dg/atomic/pr65345-4.c -O1 (internal compiler error: in
extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/pr65345-4.c -O1 (test for excess errors)
+FAIL: gcc.dg/atomic/pr65345-4.c -O2 (internal compiler error: in
extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/pr65345-4.c -O2 (test for excess errors)
+FAIL: gcc.dg/atomic/pr65345-4.c -O3 -g (internal compiler error:
in extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/pr65345-4.c -O3 -g (test for excess errors)
+FAIL: gcc.dg/atomic/pr65345-4.c -Os (internal compiler error: in
extract_insn, at recog.cc:2791)
+FAIL: gcc.dg/atomic/pr65345-4.c -Os (test for excess errors)
+FAIL: gcc.dg/atomic/pr65345-4.c -O2 -flto -fno-use-linker-plugin
-flto-partition=none (internal compiler error: in extract_insn, at
recog.cc:2791)
+FAIL: gcc.dg/atomic/pr65345-4.c -O2 -flto -fno-use-linker-plugin
-flto-partition=none (test for excess errors)
On configuration with FPU it results in ICEs during libgfortran build, all
with the similar diagnostic:
gcc/libgfortran/intrinsics/erfc_scaled_inc.c:179:1: error: unrecognizable insn:
179 | }
| ^
(insn 23 22 24 2 (set (reg:CC 18 b0)
(lt:CC (const_double:SF 0.0 [0x0.0p+0])
(reg/v:SF 96 [ x ])))
"gcc/libgfortran/intrinsics/erfc_scaled_inc.c":111:18 -1
(nil))
during RTL pass: vregs
@@ -155,11 +155,11 @@
&& CONSTANT_P (op)
&& GET_MODE_SIZE (mode) % UNITS_PER_WORD == 0")))))
-;; Accept the floating point constant 1 in the appropriate mode.
-(define_predicate "const_float_1_operand"
+;; Accept the floating point constant 0 in the appropriate mode.
+(define_predicate "const_float_0_operand"
(match_code "const_double")
{
- return real_equal (CONST_DOUBLE_REAL_VALUE (op), &dconst1);
+ return real_equal (CONST_DOUBLE_REAL_VALUE (op), &dconst0);
})
(define_predicate "fpmem_offset_operand"
@@ -179,6 +179,13 @@
return false;
})
+(define_predicate "cstoresf_cbranchsf_operand"
+ (ior (and (match_test "TARGET_HARD_FLOAT")
+ (match_operand 0 "register_operand"))
+ (and (match_code "const_double")
+ (match_test "real_equal (CONST_DOUBLE_REAL_VALUE (op),
+ &dconst0)"))))
+
(define_predicate "branch_operator"
(match_code "eq,ne,lt,ge"))
@@ -197,6 +204,12 @@
(define_predicate "xtensa_cstoresi_operator"
(match_code "eq,ne,gt,ge,lt,le"))
+(define_predicate "cstoresf_cbranchsf_operator"
+ (ior (and (match_test "TARGET_HARD_FLOAT")
+ (match_operand 0 "comparison_operator"))
+ (and (match_test "!TARGET_HARD_FLOAT")
+ (match_operand 0 "boolean_operator"))))
+
(define_predicate "xtensa_shift_per_byte_operator"
(match_code "ashift,ashiftrt,lshiftrt"))
@@ -865,6 +865,16 @@ xtensa_expand_conditional_branch (rtx *operands, machine_mode mode)
switch (mode)
{
case E_SFmode:
+ if ((test_code == EQ || test_code == NE)
+ && const_float_0_operand (cmp1, SFmode))
+ {
+ emit_move_insn (cmp1 = gen_reg_rtx (SImode),
+ gen_rtx_SUBREG (SImode, cmp0, 0));
+ emit_insn (gen_addsi3 (cmp1, cmp1, cmp1));
+ cmp = gen_int_relational (test_code, cmp1, const0_rtx);
+ break;
+ }
+
if (TARGET_HARD_FLOAT)
{
cmp = gen_float_relational (test_code, cmp0, cmp1);
@@ -996,6 +1006,34 @@ xtensa_expand_scc (rtx operands[4], machine_mode cmp_mode)
rtx one_tmp, zero_tmp;
rtx (*gen_fn) (rtx, rtx, rtx, rtx, rtx);
+ if (cmp_mode == SFmode)
+ {
+ if (const_float_0_operand (operands[3], SFmode))
+ switch (GET_CODE (operands[1]))
+ {
+ case EQ:
+ emit_move_insn (cmp = gen_reg_rtx (SImode),
+ gen_rtx_SUBREG (SImode, operands[2], 0));
+ emit_insn (gen_addsi3 (cmp, cmp, cmp));
+ emit_insn (gen_eq_zero (dest, cmp));
+ return 1;
+
+ case NE:
+ emit_move_insn (cmp = gen_reg_rtx (SImode),
+ gen_rtx_SUBREG (SImode, operands[2], 0));
+ emit_insn (gen_addsi3 (cmp, cmp, cmp));
+ one_tmp = force_reg (SImode, const1_rtx);
+ emit_insn (gen_movsicc_ne0_reg_zero (dest, cmp, one_tmp));
+ return 1;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ if (! register_operand (operands[3], SFmode))
+ return 0;
+ }
+
if (!(cmp = gen_conditional_move (GET_CODE (operands[1]), cmp_mode,
operands[2], operands[3])))
return 0;
@@ -4438,6 +4476,11 @@ xtensa_rtx_costs (rtx x, machine_mode mode, int outer_code,
return true;
case CONST_DOUBLE:
+ if (outer_code == COMPARE && const_float_0_operand (x, SFmode))
+ {
+ *total = 0;
+ return true;
+ }
if (TARGET_CONST16)
*total = COSTS_N_INSNS (4);
else
@@ -1906,11 +1906,11 @@
})
(define_expand "cbranchsf4"
- [(match_operator 0 "comparison_operator"
+ [(match_operator 0 "cstoresf_cbranchsf_operator"
[(match_operand:SF 1 "register_operand")
- (match_operand:SF 2 "register_operand")])
+ (match_operand:SF 2 "cstoresf_cbranchsf_operand")])
(match_operand 3 "")]
- "TARGET_HARD_FLOAT"
+ ""
{
xtensa_expand_conditional_branch (operands, SFmode);
DONE;
@@ -2364,10 +2364,10 @@
(define_expand "cstoresf4"
[(match_operand:SI 0 "register_operand")
- (match_operator:SI 1 "comparison_operator"
+ (match_operator:SI 1 "cstoresf_cbranchsf_operator"
[(match_operand:SF 2 "register_operand")
- (match_operand:SF 3 "register_operand")])]
- "TARGET_HARD_FLOAT"
+ (match_operand:SF 3 "cstoresf_cbranchsf_operand")])]
+ ""
{
if (!xtensa_expand_scc (operands, SFmode))
FAIL;
@@ -2432,6 +2432,30 @@
(set_attr "mode" "SI")
(set_attr "length" "3,3")])
+(define_insn_and_split "movsicc_ne0_reg_zero"
+ [(set (match_operand:SI 0 "register_operand" "=a")
+ (if_then_else:SI (ne (match_operand:SI 1 "register_operand" "r")
+ (const_int 0))
+ (match_operand:SI 2 "register_operand" "r")
+ (const_int 0)))]
+ ""
+ "#"
+ ""
+ [(set (match_dup 0)
+ (match_dup 2))
+ (set (match_dup 0)
+ (if_then_else:SI (ne (match_dup 1)
+ (const_int 0))
+ (match_dup 0)
+ (match_dup 1)))]
+ ""
+ [(set_attr "type" "move")
+ (set_attr "mode" "SI")
+ (set (attr "length")
+ (if_then_else (match_test "TARGET_DENSITY")
+ (const_int 5)
+ (const_int 6)))])
+
(define_insn "movsfcc_internal0"
[(set (match_operand:SF 0 "register_operand" "=a,a,f,f")
(if_then_else:SF (match_operator 4 "branch_operator"
@@ -3157,6 +3181,23 @@
(const_int 5)
(const_int 6)))])
+(define_insn_and_split "eq_zero"
+ [(set (match_operand:SI 0 "register_operand" "=a")
+ (eq:SI (match_operand:SI 1 "register_operand" "r")
+ (const_int 0)))]
+ "TARGET_NSA"
+ "#"
+ "&& 1"
+ [(set (match_dup 0)
+ (clz:SI (match_dup 1)))
+ (set (match_dup 0)
+ (lshiftrt:SI (match_dup 0)
+ (const_int 5)))]
+ ""
+ [(set_attr "type" "move")
+ (set_attr "mode" "SI")
+ (set_attr "length" "6")])
+
(define_peephole2
[(set (match_operand:SI 0 "register_operand")
(match_operand:SI 6 "reload_operand"))