[v2] bpf: correct bpf_print_operand for floats [PR108293]
Checks
Commit Message
Hi Jose,
As we discussed on IRC, since we don't currently define
TARGET_SUPPORTS_WIDE_INT it is safer to keep the handling for VOIDmode
CONST_DOUBLEs. My current understanding is that it may be needed if the
host is a 32-bit platform.
I also added a gcc_unreachable () as you pointed out. V2 below.
Tested with bpf-unknown-none on x86_64 host, no known regressions.
WDYT?
Thanks,
David
---
[Changes from v1:
- Keep handling for VOIDmode CONST_DOUBLE, just in case.
- Add a gcc_unreachable () if `op` is none of VOIDmode, SFmode,
nor DFmode. ]
The existing logic in bpf_print_operand was only correct for integral
CONST_DOUBLEs, and emitted garbage for floating point modes. Fix it so
floating point mode operands are correctly handled.
PR target/108293
gcc/
* config/bpf/bpf.cc (bpf_print_operand): Correct handling for
floating point modes.
gcc/testsuite/
* gcc.target/bpf/double-1.c: New test.
* gcc.target/bpf/double-2.c: New test.
* gcc.target/bpf/float-1.c: New test.
---
gcc/config/bpf/bpf.cc | 34 ++++++++++++++++++++-----
gcc/testsuite/gcc.target/bpf/double-1.c | 12 +++++++++
gcc/testsuite/gcc.target/bpf/double-2.c | 12 +++++++++
gcc/testsuite/gcc.target/bpf/float-1.c | 12 +++++++++
4 files changed, 64 insertions(+), 6 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/bpf/double-1.c
create mode 100644 gcc/testsuite/gcc.target/bpf/double-2.c
create mode 100644 gcc/testsuite/gcc.target/bpf/float-1.c
Comments
> Hi Jose,
>
> As we discussed on IRC, since we don't currently define
> TARGET_SUPPORTS_WIDE_INT it is safer to keep the handling for VOIDmode
> CONST_DOUBLEs. My current understanding is that it may be needed if the
> host is a 32-bit platform.
>
> I also added a gcc_unreachable () as you pointed out. V2 below.
> Tested with bpf-unknown-none on x86_64 host, no known regressions.
>
> WDYT?
OK for master.
Thanks!
>
> Thanks,
> David
>
> ---
>
> [Changes from v1:
> - Keep handling for VOIDmode CONST_DOUBLE, just in case.
> - Add a gcc_unreachable () if `op` is none of VOIDmode, SFmode,
> nor DFmode. ]
>
> The existing logic in bpf_print_operand was only correct for integral
> CONST_DOUBLEs, and emitted garbage for floating point modes. Fix it so
> floating point mode operands are correctly handled.
>
> PR target/108293
>
> gcc/
>
> * config/bpf/bpf.cc (bpf_print_operand): Correct handling for
> floating point modes.
>
> gcc/testsuite/
>
> * gcc.target/bpf/double-1.c: New test.
> * gcc.target/bpf/double-2.c: New test.
> * gcc.target/bpf/float-1.c: New test.
> ---
> gcc/config/bpf/bpf.cc | 34 ++++++++++++++++++++-----
> gcc/testsuite/gcc.target/bpf/double-1.c | 12 +++++++++
> gcc/testsuite/gcc.target/bpf/double-2.c | 12 +++++++++
> gcc/testsuite/gcc.target/bpf/float-1.c | 12 +++++++++
> 4 files changed, 64 insertions(+), 6 deletions(-)
> create mode 100644 gcc/testsuite/gcc.target/bpf/double-1.c
> create mode 100644 gcc/testsuite/gcc.target/bpf/double-2.c
> create mode 100644 gcc/testsuite/gcc.target/bpf/float-1.c
>
> diff --git a/gcc/config/bpf/bpf.cc b/gcc/config/bpf/bpf.cc
> index 2aeaeaf309b..576a1fe8eab 100644
> --- a/gcc/config/bpf/bpf.cc
> +++ b/gcc/config/bpf/bpf.cc
> @@ -880,13 +880,35 @@ bpf_print_operand (FILE *file, rtx op, int code ATTRIBUTE_UNUSED)
> output_address (GET_MODE (op), XEXP (op, 0));
> break;
> case CONST_DOUBLE:
> - if (CONST_DOUBLE_HIGH (op))
> - fprintf (file, HOST_WIDE_INT_PRINT_DOUBLE_HEX,
> - CONST_DOUBLE_HIGH (op), CONST_DOUBLE_LOW (op));
> - else if (CONST_DOUBLE_LOW (op) < 0)
> - fprintf (file, HOST_WIDE_INT_PRINT_HEX, CONST_DOUBLE_LOW (op));
> + if (GET_MODE (op) == VOIDmode)
> + {
> + if (CONST_DOUBLE_HIGH (op))
> + fprintf (file, HOST_WIDE_INT_PRINT_DOUBLE_HEX,
> + CONST_DOUBLE_HIGH (op), CONST_DOUBLE_LOW (op));
> + else if (CONST_DOUBLE_LOW (op) < 0)
> + fprintf (file, HOST_WIDE_INT_PRINT_HEX, CONST_DOUBLE_LOW (op));
> + else
> + fprintf (file, HOST_WIDE_INT_PRINT_DEC, CONST_DOUBLE_LOW (op));
> + }
> else
> - fprintf (file, HOST_WIDE_INT_PRINT_DEC, CONST_DOUBLE_LOW (op));
> + {
> + long vals[2];
> + real_to_target (vals, CONST_DOUBLE_REAL_VALUE (op), GET_MODE (op));
> + vals[0] &= 0xffffffff;
> + vals[1] &= 0xffffffff;
> + if (GET_MODE (op) == SFmode)
> + fprintf (file, "0x%08lx", vals[0]);
> + else if (GET_MODE (op) == DFmode)
> + {
> + /* Note: real_to_target puts vals in target word order. */
> + if (WORDS_BIG_ENDIAN)
> + fprintf (file, "0x%08lx%08lx", vals[0], vals[1]);
> + else
> + fprintf (file, "0x%08lx%08lx", vals[1], vals[0]);
> + }
> + else
> + gcc_unreachable ();
> + }
> break;
> default:
> output_addr_const (file, op);
> diff --git a/gcc/testsuite/gcc.target/bpf/double-1.c b/gcc/testsuite/gcc.target/bpf/double-1.c
> new file mode 100644
> index 00000000000..200f1bd18f8
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/bpf/double-1.c
> @@ -0,0 +1,12 @@
> +/* { dg-do compile } */
> +/* { dg-options "-mlittle-endian" } */
> +
> +double f;
> +double a() { f = 1.0; return 1.0; }
> +double b() { f = 2.0; return 2.0; }
> +double c() { f = 2.0; return 3.0; }
> +double d() { f = 3.0; return 3.0; }
> +
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x3ff0000000000000" 2 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x4000000000000000" 3 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x4008000000000000" 3 } } */
> diff --git a/gcc/testsuite/gcc.target/bpf/double-2.c b/gcc/testsuite/gcc.target/bpf/double-2.c
> new file mode 100644
> index 00000000000..d04ddd0c575
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/bpf/double-2.c
> @@ -0,0 +1,12 @@
> +/* { dg-do compile } */
> +/* { dg-options "-mbig-endian" } */
> +
> +double f;
> +double a() { f = 1.0; return 1.0; }
> +double b() { f = 2.0; return 2.0; }
> +double c() { f = 2.0; return 3.0; }
> +double d() { f = 3.0; return 3.0; }
> +
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x3ff0000000000000" 2 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x4000000000000000" 3 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x4008000000000000" 3 } } */
> diff --git a/gcc/testsuite/gcc.target/bpf/float-1.c b/gcc/testsuite/gcc.target/bpf/float-1.c
> new file mode 100644
> index 00000000000..05ed7bb651d
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/bpf/float-1.c
> @@ -0,0 +1,12 @@
> +/* { dg-do compile } */
> +/* { dg-options "-mlittle-endian" } */
> +
> +float f;
> +float a() { f = 1.0; return 1.0; }
> +float b() { f = 2.0; return 2.0; }
> +float c() { f = 2.0; return 3.0; }
> +float d() { f = 3.0; return 3.0; }
> +
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x3f800000" 2 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x40000000" 3 } } */
> +/* { dg-final { scan-assembler-times "lddw\t%r.,0x40400000" 3 } } */
@@ -880,13 +880,35 @@ bpf_print_operand (FILE *file, rtx op, int code ATTRIBUTE_UNUSED)
output_address (GET_MODE (op), XEXP (op, 0));
break;
case CONST_DOUBLE:
- if (CONST_DOUBLE_HIGH (op))
- fprintf (file, HOST_WIDE_INT_PRINT_DOUBLE_HEX,
- CONST_DOUBLE_HIGH (op), CONST_DOUBLE_LOW (op));
- else if (CONST_DOUBLE_LOW (op) < 0)
- fprintf (file, HOST_WIDE_INT_PRINT_HEX, CONST_DOUBLE_LOW (op));
+ if (GET_MODE (op) == VOIDmode)
+ {
+ if (CONST_DOUBLE_HIGH (op))
+ fprintf (file, HOST_WIDE_INT_PRINT_DOUBLE_HEX,
+ CONST_DOUBLE_HIGH (op), CONST_DOUBLE_LOW (op));
+ else if (CONST_DOUBLE_LOW (op) < 0)
+ fprintf (file, HOST_WIDE_INT_PRINT_HEX, CONST_DOUBLE_LOW (op));
+ else
+ fprintf (file, HOST_WIDE_INT_PRINT_DEC, CONST_DOUBLE_LOW (op));
+ }
else
- fprintf (file, HOST_WIDE_INT_PRINT_DEC, CONST_DOUBLE_LOW (op));
+ {
+ long vals[2];
+ real_to_target (vals, CONST_DOUBLE_REAL_VALUE (op), GET_MODE (op));
+ vals[0] &= 0xffffffff;
+ vals[1] &= 0xffffffff;
+ if (GET_MODE (op) == SFmode)
+ fprintf (file, "0x%08lx", vals[0]);
+ else if (GET_MODE (op) == DFmode)
+ {
+ /* Note: real_to_target puts vals in target word order. */
+ if (WORDS_BIG_ENDIAN)
+ fprintf (file, "0x%08lx%08lx", vals[0], vals[1]);
+ else
+ fprintf (file, "0x%08lx%08lx", vals[1], vals[0]);
+ }
+ else
+ gcc_unreachable ();
+ }
break;
default:
output_addr_const (file, op);
new file mode 100644
@@ -0,0 +1,12 @@
+/* { dg-do compile } */
+/* { dg-options "-mlittle-endian" } */
+
+double f;
+double a() { f = 1.0; return 1.0; }
+double b() { f = 2.0; return 2.0; }
+double c() { f = 2.0; return 3.0; }
+double d() { f = 3.0; return 3.0; }
+
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x3ff0000000000000" 2 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x4000000000000000" 3 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x4008000000000000" 3 } } */
new file mode 100644
@@ -0,0 +1,12 @@
+/* { dg-do compile } */
+/* { dg-options "-mbig-endian" } */
+
+double f;
+double a() { f = 1.0; return 1.0; }
+double b() { f = 2.0; return 2.0; }
+double c() { f = 2.0; return 3.0; }
+double d() { f = 3.0; return 3.0; }
+
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x3ff0000000000000" 2 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x4000000000000000" 3 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x4008000000000000" 3 } } */
new file mode 100644
@@ -0,0 +1,12 @@
+/* { dg-do compile } */
+/* { dg-options "-mlittle-endian" } */
+
+float f;
+float a() { f = 1.0; return 1.0; }
+float b() { f = 2.0; return 2.0; }
+float c() { f = 2.0; return 3.0; }
+float d() { f = 3.0; return 3.0; }
+
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x3f800000" 2 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x40000000" 3 } } */
+/* { dg-final { scan-assembler-times "lddw\t%r.,0x40400000" 3 } } */