This introduces initial support to generate .sframe from CFI directives
in assembler on s390x. Due to the following SFrame limitations it is
incomplete and does not work for most real-world applications (i.e.
generation of SFrame FDE is skipped):
- SFrame FP/RA tracking assumes the register contents to be saved on
the stack (i.e. .cfi_offset). It does not support FP/RA register
contents being saved in other registers (i.e. .cfi_register). GCC
on s390x can be observed to save the FP/RA register contents in
other registers (e.g. floating-point registers).
- SFrame assumes a static RA register number. While the s390x ELF ABI
[1] specifies register 14 to contain the return address on entry,
GCC can be observed to copy the return address to another register
and may even use that to return. Additionally glibc on s390x has
two functions (mcount and fentry) that specify register 0 to hold
the return address. This would either require a change to glibc (if
possible) or SFrame support to track the RA register number specified
in CFI directive .cfi_return_column.
- SFrame assumes a static FP register number. The s390x ELF ABI [1]
does not specify any FP register number. GCC and clang on s390x
usually use register 11 as frame pointer. GCC on s390x can also be
observed to use register 14 (e.g. binutils and glibc builds). glibc
on s390x contains code that uses register 12 for the frame pointer.
This would require SFrame support to track the SP/FP register number
specified in CFI directives .cfi_def_cfa and .cfi_def_cfa_register.
- SFrame does not support CFI directive .cfi_val_offset. glibc on s390x
has two functions (mcount and fentry), that make use of that CFI
directive. This would either require a change in glibc (if possible)
or SFrame to support CFI directive .cfi_val_offset.
This s390x support is largely based on the AArch64 support from commit
b52c4ee46657 ("gas: generate .sframe from CFI directives").
SFrame ABI/arch identifier SFRAME_ABI_S390_ENDIAN_BIG is introduced
for s390 and added to the SFrame specification.
According to the s390x ELF ABI [1] the following calling conventions
are used on s390x architecture:
- Register 15 is used as stack pointer (SP). The CFA is initially
located at offset +160 from the SP.
- Register 14 is used as return address (RA).
- There is no dedicated frame pointer. GCC and LLVM currently use
register 11 as frame pointer.
The s390x ELF ABI [1] standard stack frame layout has the following
conventions:
- The return address (RA, r15) may be saved at offset -40 from the
CFA. Unlike x86 AMD64 architecture it is not necessarily saved on
the stack. Also compilers may use a non-standard stack frame layout,
such as but not limited to GCC with option -mpacked-stack.
Therefore SFrame RA tracking is used.
- The potential frame pointer (FP, r11) may be saved at offset -72
from the CFA. It is not necessarily saved on the stack and compilers
may use a non-standard stack frame layout (see above).
Therefore SFrame FP tracking is used.
Support for SFrame is only enabled for z/Architecture (s390x) with
64-bit architecture mode. It is disabled for 32-bit architecture mode
and ESA/390 (s390).
Add s390-specific SFrame test cases. As for the error test cases add
ones that use a non-default frame pointer (FP) register number and ones
that save the return address (RA) in a non-default RA register number.
[1] ELF ABI s390x Supplement:
https://github.com/IBM/s390x-abi/releases
[2] ELF ABI s390 Supplement:
https://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_s390.html
https://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_s390.pdf
include/
* sframe.h (SFRAME_ABI_S390_ENDIAN_BIG): Define SFrame ABI/arch
identifier for s390x. Reference s390x architecture in comments.
libsframe/
* doc/sframe-spec.texi: Document SFrame ABI/arch identifier for
s390x and reference s390x architecture.
gas/
* config/tc-s390.h: s390x support to generate .sframe from CFI
directives in assembler.
* config/tc-s390.c: Likewise.
* gen-sframe.c: Reference s390x architecture in comments.
gas/testsuite/
* gas/cfi-sframe/cfi-sframe.exp: Enable common SFrame test cases
for s390x. Add s390-specific SFrame test cases.
* gas/cfi-sframe/cfi-sframe-s390-1.s: New s390-specific SFrame
test case.
* gas/cfi-sframe/cfi-sframe-s390-1.d: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-2.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-2.d: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-err-1.s: New s390-specific
SFrame error test case that uses a non-default register number
for the frame pointer.
* gas/cfi-sframe/cfi-sframe-s390-err-1.l: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-err-2.s: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-err-2.l: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-err-3.s: New s390-specific
SFrame error test case that uses a non-default register number
to save the return address.
* gas/cfi-sframe/cfi-sframe-s390-err-3.l: Likewise.
* gas/cfi-sframe/cfi-sframe-s390-err-4.s: New s390-specific
SFrame error test case that used a non-default return column
(return address) register number.
* gas/cfi-sframe/cfi-sframe-s390-err-4.l: Likewise.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
---
Notes (jremus):
The SFrame support for s390x provided by this patch still has some open
issues, which need to be addressed. Any ideas or assistance to overcome
the SFrame limitations listed in the commit description are very
welcome.
Note that unlike the AArch64 and x68 AMD64 implementation this s390x
implementation does statically initialize the architecture-dependent
variables s390_sframe_cfa_{sp|fp|ra}_reg, which are referenced by the
SFrame interface macros SFRAME_CFA_{SP|FP|RA}_REG. The other
implementations do initialize them in md_begin. I verified that all
occurrences of the macros SFRAME_CFA_{SP|FP|RA}_REG are in context of
test/read and never write.
Is there a reason to define the SFrame interface macros
SFRAME_CFA_{SP|FP|RA}_REG to variables? For instance should the SFrame
common code be able to modify these? Currently I do not see how it
would work well, if the architecture-specific code would change these
at run time. Similar for the predicate sframe_ra_tracking_p.
Example #1: Warnings when compiling binutils with SFrame
$ ../configure CC="gcc -B$HOME/temp/binutils-gcc/bin -Wa,--gsframe" \
CXX="g++ -B$HOME/temp/binutils-gcc/bin -Wa,--gsframe" \
--prefix=$HOME/temp/binutils-sframe
$ make -j $(nprocs) 2>&1 | tee make.log
$ grep --only-matching "Warning:.*" make.log | sort | uniq -c
1 Warning: skipping SFrame FDE due to .cfi_def_cfa specifying CFA
base register other than SP or FP (14 instead of 15 or 11)
205 Warning: skipping SFrame FDE due to .cfi_register specifying FP
register (11)
56 Warning: skipping SFrame FDE due to .cfi_register specifying SP
register (15)
Example #2: Warnings when compiling glibc with SFrame
$ ../configure CC="gcc -B$HOME/temp/binutils-sframe/bin -Wa,--gsframe" \
CXX="g++ -B$HOME/temp/binutils-sframe/bin -Wa,--gsframe" \
--prefix=$HOME/temp/glibc-sframe
$ make -j $(nprocs) 2>&1 | tee make.log
$ grep --only-matching "Warning:.*" make.log | sort | uniq -c
2 Warning: skipping SFrame FDE due to .cfi_def_cfa_register
specifying CFA base register other than SP or FP (12 instead of
15 or 11)
7 Warning: skipping SFrame FDE due to .cfi_def_cfa specifying CFA
base register other than SP or FP (14 instead of 15 or 11)
225 Warning: skipping SFrame FDE due to .cfi_register specifying FP
register (11)
187 Warning: skipping SFrame FDE due to .cfi_register specifying SP
register (15)
2 Warning: skipping SFrame FDE due to DWARF CFI op CFI_escape
(0x103)
2 Warning: skipping SFrame FDE due to non-default DWARF return
column (0 instead of 14)
.cfi_def_cfa 14, ... originates from GCC generated code, which uses
register %r14 as frame pointer (FP).
.cfi_def_cfa_register 12 originates from hand-written assembler code
sysdeps/s390/s390-64/dl-trampoline.S, which uses register %r12 as frame
pointer (FP).
.cfi_return_column 0 and .cfi_escape both originate from hand-written
assembler code sysdeps/s390/s390-64/s390x-mcount.S, which is compiled
twice (with and without -DSHARED).
- .cfi_escape 0x14, 0x15, 0x14: Is used to code
".cfi_val_offset r15, -160", which would require binutils 2.28+ (glibc
currently supports a minimum binutils 2.25). This CFI directive states
that the contents of register %r15 are CFA-160 (not to be confused
with saved at CFA-160).
- .cfi_return_column 0: The following comment explains why register %r0
contains the return address:
"The _mcount implementation now has to call __mcount_internal with the
address of .LP0 as first parameter and the return address as second
parameter. &.LP0 was loaded to %r1 and the return address is in %r14.
_mcount may not modify any register.
Alternatively, at the start of each function __fentry__ is called
using a single
brasl 0,__fentry__
instruction. In this case %r0 points to the callee, and %r14 points
to the caller. These values need to be passed to __mcount_internal
using the same sequence as for _mcount, so the code below is shared
between both functions.
The only major difference is that __fentry__ cannot return through
%r0, in which the return address is located, because br instruction
is a no-op with this register. Therefore %r1, which is clobbered by
the PLT anyway, is used."
Excerpt of the relevant glibc source code:
.globl C_SYMBOL_NAME(MCOUNT_SYMBOL)
.type C_SYMBOL_NAME(MCOUNT_SYMBOL), @function
cfi_startproc
.align ALIGNARG(4)
C_LABEL(MCOUNT_SYMBOL)
cfi_return_column (glue(r, MCOUNT_CALLEE_REG))
/* Save the caller-clobbered registers. */
aghi %r15,-224
cfi_adjust_cfa_offset (224)
/* binutils 2.28+: .cfi_val_offset r15, -160 */
.cfi_escape \
/* DW_CFA_val_offset */ 0x14, \
/* r15 */ 0x0f, \
/* scaled offset */ 0x14
stmg %r14,%r5,160(%r15)
cfi_offset (r14, -224)
cfi_offset (r0, -224+16)
...
gas/config/tc-s390.c | 55 +++++++++++++++++++
gas/config/tc-s390.h | 31 +++++++++++
gas/gen-sframe.c | 2 +-
.../gas/cfi-sframe/cfi-sframe-s390-1.d | 23 ++++++++
.../gas/cfi-sframe/cfi-sframe-s390-1.s | 37 +++++++++++++
.../gas/cfi-sframe/cfi-sframe-s390-2.d | 23 ++++++++
.../gas/cfi-sframe/cfi-sframe-s390-2.s | 37 +++++++++++++
.../gas/cfi-sframe/cfi-sframe-s390-err-1.d | 15 +++++
.../gas/cfi-sframe/cfi-sframe-s390-err-1.s | 37 +++++++++++++
.../gas/cfi-sframe/cfi-sframe-s390-err-2.d | 15 +++++
.../gas/cfi-sframe/cfi-sframe-s390-err-2.s | 37 +++++++++++++
.../gas/cfi-sframe/cfi-sframe-s390-err-3.d | 15 +++++
.../gas/cfi-sframe/cfi-sframe-s390-err-3.s | 6 ++
.../gas/cfi-sframe/cfi-sframe-s390-err-4.d | 15 +++++
.../gas/cfi-sframe/cfi-sframe-s390-err-4.s | 5 ++
gas/testsuite/gas/cfi-sframe/cfi-sframe.exp | 13 ++++-
include/sframe.h | 7 ++-
libsframe/doc/sframe-spec.texi | 8 ++-
18 files changed, 374 insertions(+), 7 deletions(-)
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-1.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-1.s
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-2.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-2.s
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-1.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-1.s
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-2.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-2.s
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-3.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-3.s
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-4.d
create mode 100644 gas/testsuite/gas/cfi-sframe/cfi-sframe-s390-err-4.s
@@ -24,6 +24,8 @@
#include "subsegs.h"
#include "dwarf2dbg.h"
#include "dw2gencfi.h"
+#include "sframe.h"
+#include "gen-sframe.h"
#include "opcode/s390.h"
#include "elf/s390.h"
@@ -83,6 +85,17 @@ const char FLT_CHARS[] = "dD";
/* The dwarf2 data alignment, adjusted for 32 or 64 bit. */
int s390_cie_data_alignment;
+/* Register numbers used for SFrame stack trace info. */
+
+/* Stack-pointer DWARF register number according to s390x ELF ABI. */
+unsigned int s390_sframe_cfa_sp_reg = 15;
+
+/* Frame-pointer DWARF register number accoring to s390x GCC/LLVM convention. */
+unsigned int s390_sframe_cfa_fp_reg = 11;
+
+/* Return-address DWARF register number according to s390x ELF ABI. */
+unsigned int s390_sframe_cfa_ra_reg = DWARF2_DEFAULT_RETURN_COLUMN;
+
/* The target specific pseudo-ops which we support. */
/* Define the prototypes for the pseudo-ops */
@@ -2639,6 +2652,48 @@ tc_s390_regname_to_dw2regnum (char *regname)
return regnum;
}
+/* Whether SFrame stack trace info is supported. */
+
+bool
+s390_support_sframe_p (void)
+{
+ /* At this time, SFrame is supported for s390x (64-bit) only. */
+ return (s390_arch_size == 64);
+}
+
+/* Specify if RA tracking is needed. */
+
+bool
+s390_sframe_ra_tracking_p (void)
+{
+ return true;
+}
+
+/* Specify the fixed offset to recover RA from CFA.
+ (useful only when RA tracking is not needed). */
+
+offsetT
+s390_sframe_cfa_ra_offset (void)
+{
+ return (offsetT) SFRAME_CFA_FIXED_RA_INVALID;
+}
+
+/* Get the abi/arch indentifier for SFrame. */
+
+unsigned char
+s390_sframe_get_abi_arch (void)
+{
+ unsigned char sframe_abi_arch = 0;
+
+ if (s390_support_sframe_p ())
+ {
+ gas_assert (target_big_endian);
+ sframe_abi_arch = SFRAME_ABI_S390_ENDIAN_BIG;
+ }
+
+ return sframe_abi_arch;
+}
+
void
s390_elf_final_processing (void)
{
@@ -98,3 +98,34 @@ extern int s390_cie_data_alignment;
extern void s390_elf_final_processing (void);
#define elf_tc_final_processing s390_elf_final_processing
+
+/* SFrame */
+
+/* Whether SFrame stack trace info is supported. */
+extern bool s390_support_sframe_p (void);
+#define support_sframe_p s390_support_sframe_p
+
+/* The stack-pointer register number for SFrame stack trace info. */
+extern unsigned int s390_sframe_cfa_sp_reg;
+#define SFRAME_CFA_SP_REG s390_sframe_cfa_sp_reg
+
+/* The frame-pointer register number for SFrame stack trace info. */
+extern unsigned int s390_sframe_cfa_fp_reg;
+#define SFRAME_CFA_FP_REG s390_sframe_cfa_fp_reg
+
+/* The return address register number for SFrame stack trace info. */
+extern unsigned int s390_sframe_cfa_ra_reg;
+#define SFRAME_CFA_RA_REG s390_sframe_cfa_ra_reg
+
+/* Specify if RA tracking is needed. */
+extern bool s390_sframe_ra_tracking_p (void);
+#define sframe_ra_tracking_p s390_sframe_ra_tracking_p
+
+/* Specify the fixed offset to recover RA from CFA.
+ (useful only when RA tracking is not needed). */
+extern offsetT s390_sframe_cfa_ra_offset (void);
+#define sframe_cfa_ra_offset s390_sframe_cfa_ra_offset
+
+/* The abi/arch indentifier for SFrame. */
+unsigned char s390_sframe_get_abi_arch (void);
+#define sframe_get_abi_arch s390_sframe_get_abi_arch
@@ -673,7 +673,7 @@ output_sframe_internal (void)
#endif
out_one (fixed_ra_offset);
- /* None of the AMD64, or AARCH64 ABIs need the auxiliary header.
+ /* None of the AMD64, AARCH64, or S390 ABIs need the auxiliary header.
When the need does arise to use this field, the appropriate backend
must provide this information. */
out_one (0); /* Auxiliary SFrame header length. */
new file mode 100644
@@ -0,0 +1,23 @@
+#objdump: --sframe=.sframe
+#name: SFrame generation on s390
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 1
+ Num FREs: 6
+
+ Function Index :
+
+ func idx \[0\]: pc = 0x0, size = 40 bytes
+ STARTPC +CFA +FP +RA +
+ 0+0000 +sp\+160 +u +u +
+ 0+0006 +sp\+160 +c\-72 +c\-48 +
+ 0+000c +sp\+336 +c\-72 +c\-48 +
+ 0+0010 +fp\+336 +c\-72 +c\-48 +
+ 0+001c +sp\+160 +u +u +
+ 0+001e +fp\+336 +c\-72 +c\-48 +
+#pass
new file mode 100644
@@ -0,0 +1,37 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ stmg %r6,%r15,48(%r15)
+ .cfi_offset 6, -112
+ .cfi_offset 7, -104
+ .cfi_offset 8, -96
+ .cfi_offset 9, -88
+ .cfi_offset 10, -80
+ .cfi_offset 11, -72
+ .cfi_offset 12, -64
+ .cfi_offset 13, -56
+ .cfi_offset 14, -48
+ .cfi_offset 15, -40
+ lay %r15,-176(%r15)
+ .cfi_def_cfa_offset 336
+ lgr %r11,%r15
+ .cfi_def_cfa_register 11
+ lay %r15,-128(%r15)
+.Lreturn:
+ lmg %r6,%r15,224(%r11)
+ .cfi_remember_state
+ .cfi_restore 15
+ .cfi_restore 14
+ .cfi_restore 13
+ .cfi_restore 12
+ .cfi_restore 11
+ .cfi_restore 10
+ .cfi_restore 9
+ .cfi_restore 8
+ .cfi_restore 7
+ .cfi_restore 6
+ .cfi_def_cfa 15, 160
+ br %r14
+ .cfi_restore_state
+ lay %r15,-128(%r15)
+ j .Lreturn
+ .cfi_endproc
new file mode 100644
@@ -0,0 +1,23 @@
+#objdump: --sframe=.sframe
+#name: SFrame generation on s390
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 1
+ Num FREs: 6
+
+ Function Index :
+
+ func idx \[0\]: pc = 0x0, size = 40 bytes
+ STARTPC +CFA +FP +RA +
+ 0+0000 +sp\+160 +u +u +
+ 0+0006 +sp\+160 +c\-72 +c\-48 +
+ 0+000c +sp\+336 +c\-72 +c\-48 +
+ 0+0010 +fp\+336 +c\-72 +c\-48 +
+ 0+001c +sp\+160 +u +u +
+ 0+001e +fp\+336 +c\-72 +c\-48 +
+#pass
new file mode 100644
@@ -0,0 +1,37 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ stmg %r6,%r15,48(%r15)
+ .cfi_rel_offset 6, 48
+ .cfi_rel_offset 7, 56
+ .cfi_rel_offset 8, 64
+ .cfi_rel_offset 9, 72
+ .cfi_rel_offset 10, 80
+ .cfi_rel_offset 11, 88
+ .cfi_rel_offset 12, 96
+ .cfi_rel_offset 13, 104
+ .cfi_rel_offset 14, 112
+ .cfi_rel_offset 15, 120
+ lay %r15,-176(%r15)
+ .cfi_def_cfa_offset 336
+ lgr %r11,%r15
+ .cfi_def_cfa_register 11
+ lay %r15,-128(%r15)
+.Lreturn:
+ lmg %r6,%r15,224(%r11)
+ .cfi_remember_state
+ .cfi_restore 15
+ .cfi_restore 14
+ .cfi_restore 13
+ .cfi_restore 12
+ .cfi_restore 11
+ .cfi_restore 10
+ .cfi_restore 9
+ .cfi_restore 8
+ .cfi_restore 7
+ .cfi_restore 6
+ .cfi_def_cfa 15, 160
+ br %r14
+ .cfi_restore_state
+ lay %r15,-128(%r15)
+ j .Lreturn
+ .cfi_endproc
new file mode 100644
@@ -0,0 +1,15 @@
+#name: SFrame generation on s390
+#as: --gsframe
+#warning: skipping SFrame FDE due to .cfi_def_cfa_register specifying CFA base register other than SP or FP \(10 instead of 15 or 11\)
+#objdump: --sframe=.sframe
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 0
+ Num FREs: 0
+
+#pass
new file mode 100644
@@ -0,0 +1,37 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ stmg %r6,%r15,48(%r15)
+ .cfi_offset 6, -112
+ .cfi_offset 7, -104
+ .cfi_offset 8, -96
+ .cfi_offset 9, -88
+ .cfi_offset 10, -80
+ .cfi_offset 11, -72
+ .cfi_offset 12, -64
+ .cfi_offset 13, -56
+ .cfi_offset 14, -48
+ .cfi_offset 15, -40
+ lay %r15,-176(%r15)
+ .cfi_def_cfa_offset 336
+ lgr %r10,%r15
+ .cfi_def_cfa_register 10 # non-default frame pointer register
+ lay %r15,-128(%r15)
+.Lreturn:
+ lmg %r6,%r15,224(%r10)
+ .cfi_remember_state
+ .cfi_restore 15
+ .cfi_restore 14
+ .cfi_restore 13
+ .cfi_restore 12
+ .cfi_restore 11
+ .cfi_restore 10
+ .cfi_restore 9
+ .cfi_restore 8
+ .cfi_restore 7
+ .cfi_restore 6
+ .cfi_def_cfa 15, 160
+ br %r14
+ .cfi_restore_state
+ lay %r15,-128(%r15)
+ j .Lreturn
+ .cfi_endproc
new file mode 100644
@@ -0,0 +1,15 @@
+#name: SFrame generation on s390
+#as: --gsframe
+#warning: skipping SFrame FDE due to .cfi_def_cfa specifying CFA base register other than SP or FP \(10 instead of 15 or 11\)
+#objdump: --sframe=.sframe
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 0
+ Num FREs: 0
+
+#pass
new file mode 100644
@@ -0,0 +1,37 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ stmg %r6,%r15,48(%r15)
+ .cfi_offset 6, -112
+ .cfi_offset 7, -104
+ .cfi_offset 8, -96
+ .cfi_offset 9, -88
+ .cfi_offset 10, -80
+ .cfi_offset 11, -72
+ .cfi_offset 12, -64
+ .cfi_offset 13, -56
+ .cfi_offset 14, -48
+ .cfi_offset 15, -40
+ lay %r15,-176(%r15)
+ .cfi_def_cfa_offset 336
+ lgr %r10,%r15
+ .cfi_def_cfa 10, 336 # non-default frame pointer register
+ lay %r15,-128(%r15)
+.Lreturn:
+ lmg %r6,%r15,224(%r10)
+ .cfi_remember_state
+ .cfi_restore 15
+ .cfi_restore 14
+ .cfi_restore 13
+ .cfi_restore 12
+ .cfi_restore 11
+ .cfi_restore 10
+ .cfi_restore 9
+ .cfi_restore 8
+ .cfi_restore 7
+ .cfi_restore 6
+ .cfi_def_cfa 15, 160
+ br %r14
+ .cfi_restore_state
+ lay %r15,-128(%r15)
+ j .Lreturn
+ .cfi_endproc
new file mode 100644
@@ -0,0 +1,15 @@
+#name: SFrame generation on s390
+#as: --gsframe
+#warning: skipping SFrame FDE due to .cfi_register specifying RA register \(14\)
+#objdump: --sframe=.sframe
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 0
+ Num FREs: 0
+
+#pass
new file mode 100644
@@ -0,0 +1,6 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ lgr %r7,%r14
+ .cfi_register 14, 7 # non-default return address register
+ br %r7
+ .cfi_endproc
new file mode 100644
@@ -0,0 +1,15 @@
+#name: SFrame generation on s390
+#as: --gsframe
+#warning: skipping SFrame FDE due to non-default DWARF return column \(7 instead of 14\)
+#objdump: --sframe=.sframe
+#...
+Contents of the SFrame section .sframe:
+
+ Header :
+
+ Version: SFRAME_VERSION_2
+ Flags: NONE
+ Num FDEs: 0
+ Num FREs: 0
+
+#pass
new file mode 100644
@@ -0,0 +1,5 @@
+ .cfi_sections .sframe
+ .cfi_startproc
+ .cfi_return_column 7 # non-default return address register
+ br %r7
+ .cfi_endproc
@@ -64,7 +64,8 @@ proc gas_x86_64_check { } {
}
# common tests
-if { ([istarget "x86_64-*-*"] || [istarget "aarch64*-*-*"]) \
+if { ([istarget "x86_64-*-*"] || [istarget "aarch64*-*-*"] ||
+ [istarget "s390x-*-*"]) \
&& [gas_sframe_check] } then {
global ASFLAGS
@@ -99,3 +100,13 @@ if { [istarget "aarch64*-*-*"] && [gas_sframe_check] } then {
run_dump_test "cfi-sframe-aarch64-2"
run_dump_test "cfi-sframe-aarch64-pac-ab-key-1"
}
+
+# s390 specific tests
+if { [istarget "s390x*-*-*"] && [gas_sframe_check] } then {
+ run_dump_test "cfi-sframe-s390-1"
+ run_dump_test "cfi-sframe-s390-2"
+ run_dump_test "cfi-sframe-s390-err-1"
+ run_dump_test "cfi-sframe-s390-err-2"
+ run_dump_test "cfi-sframe-s390-err-3"
+ run_dump_test "cfi-sframe-s390-err-4"
+}
@@ -93,6 +93,7 @@ extern "C"
#define SFRAME_ABI_AARCH64_ENDIAN_BIG 1 /* AARCH64 big endian. */
#define SFRAME_ABI_AARCH64_ENDIAN_LITTLE 2 /* AARCH64 little endian. */
#define SFRAME_ABI_AMD64_ENDIAN_LITTLE 3 /* AMD64 little endian. */
+#define SFRAME_ABI_S390_ENDIAN_BIG 4 /* S390 big endian. */
/* SFrame FRE types. */
#define SFRAME_FRE_TYPE_ADDR1 0
@@ -190,7 +191,7 @@ typedef struct sframe_func_desc_entry
- 2-bits: Unused.
------------------------------------------------------------------------
| Unused | PAC auth A/B key (aarch64) | FDE type | FRE type |
- | | Unused (amd64) | | |
+ | | Unused (amd64, s390) | | |
------------------------------------------------------------------------
8 6 5 4 0 */
uint8_t sfde_func_info;
@@ -248,7 +249,7 @@ typedef struct sframe_fre_info
- 1 bit: Mangled RA state bit (aarch64 only).
----------------------------------------------------------------------------------
| Mangled-RA (aarch64) | Size of offsets | Number of offsets | base_reg |
- | Unused (amd64) | | | |
+ | Unused (amd64, s390) | | | |
----------------------------------------------------------------------------------
8 7 5 1 0
@@ -274,7 +275,7 @@ typedef struct sframe_fre_info
/* SFrame Frame Row Entry definitions.
- Used for both AMD64 and AARCH64.
+ Used for AMD64, AARCH64, and S390.
An SFrame Frame Row Entry is a self-sufficient record which contains
information on how to generate the stack trace for the specified range of
@@ -74,8 +74,8 @@ The SFrame stack trace information is provided in a loaded section, known as the
@code{.sframe} section. When available, the @code{.sframe} section appears in
a new segment of its own, PT_GNU_SFRAME.
-The SFrame format is currently supported only for select ABIs, namely, AMD64
-and AAPCS64.
+The SFrame format is currently supported only for select ABIs, namely, AMD64,
+AAPCS64, and s390.
A portion of the SFrame format follows an unaligned on-disk representation.
Some data structures, however, (namely the SFrame header and the SFrame
@@ -366,6 +366,10 @@ in the format.
@item @code{SFRAME_ABI_AMD64_ENDIAN_LITTLE}
@tab 3 @tab AMD64 little-endian
+@tindex SFRAME_ABI_S390_ENDIAN_BIG
+@item @code{SFRAME_ABI_S390_ENDIAN_BIG}
+@tab 4 @tab s390 big-endian
+
@end multitable
The presence of an explicit identification of ABI/arch in SFrame may allow