[v3,1/3] dt-bindings: pinctrl: mediatek: deprecate custom drive strength property
Commit Message
Deprecate mediatek,drive-strength-adv which shall not exist, that was an
unnecessary property that leaked upstream from downstream kernels and
there's no reason to use it.
The generic property drive-strength-microamp should be used instead.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
.../devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml | 8 ++++++--
.../devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml | 6 +++++-
2 files changed, 11 insertions(+), 3 deletions(-)
Comments
Il 04/04/23 18:29, Alexandre Mergnat ha scritto:
> Deprecate mediatek,drive-strength-adv which shall not exist, that was an
> unnecessary property that leaked upstream from downstream kernels and
> there's no reason to use it.
>
> The generic property drive-strength-microamp should be used instead.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
@@ -110,8 +110,13 @@ patternProperties:
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
mediatek,drive-strength-adv:
+ deprecated: true
description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -217,7 +222,7 @@ examples:
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
mediatek,pull-up-adv = <3>;
- mediatek,drive-strength-adv = <7>;
+ drive-strength-microamp = <1000>;
};
};
@@ -226,7 +231,6 @@ examples:
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
mediatek,pull-down-adv = <2>;
- mediatek,drive-strength-adv = <4>;
};
};
};
@@ -91,8 +91,13 @@ patternProperties:
input-schmitt-disable: true
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
mediatek,drive-strength-adv:
+ deprecated: true
description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -191,7 +196,6 @@ examples:
pins {
pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
mediatek,pull-up-adv = <3>;
- mediatek,drive-strength-adv = <00>;
bias-pull-up;
};
};