[net-next,04/15] net: dsa: mt7530: use regmap to access switch register space
Commit Message
Use regmap API to access the switch register space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/net/dsa/mt7530.c | 91 +++++++++++++++++++++++++---------------
drivers/net/dsa/mt7530.h | 2 +
2 files changed, 60 insertions(+), 33 deletions(-)
Comments
On Thu, Mar 30, 2023 at 04:20:57PM +0100, Daniel Golle wrote:
> Use regmap API to access the switch register space.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
On Thu, Mar 30, 2023 at 04:20:57PM +0100, Daniel Golle wrote:
> Use regmap API to access the switch register space.
I missed to make use of regmap_update_bits in mt7530_rmw which is
also used in mt7530_set and mt7530_clear.
I've now made that change and re-tested, it works just as fine and
prevents some unneccesary locking overhead.
I'll post an updated patch in v2 after giving it a bit more time for
other reviewers to also take a look.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
> drivers/net/dsa/mt7530.c | 91 +++++++++++++++++++++++++---------------
> drivers/net/dsa/mt7530.h | 2 +
> 2 files changed, 60 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index d8b041d79f2b7..e27a0e551cec0 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
> }
>
> static int
> -mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
> +mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
> {
> - struct mii_bus *bus = priv->bus;
> + struct mii_bus *bus = context;
> u16 page, r, lo, hi;
> int ret;
>
> @@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
> /* MT7530 uses 31 as the pseudo port */
> ret = bus->write(bus, 0x1f, 0x1f, page);
> if (ret < 0)
> - goto err;
> + return ret;
>
> ret = bus->write(bus, 0x1f, r, lo);
> if (ret < 0)
> - goto err;
> + return ret;
>
> ret = bus->write(bus, 0x1f, 0x10, hi);
> -err:
> + return ret;
> +}
> +
> +static int
> +mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
> +{
> + int ret;
> +
> + ret = regmap_write(priv->regmap, reg, val);
> +
> if (ret < 0)
> - dev_err(&bus->dev,
> + dev_err(priv->dev,
> "failed to write mt7530 register\n");
> +
> return ret;
> }
>
> -static u32
> -mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
> +static int
> +mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
> {
> - struct mii_bus *bus = priv->bus;
> + struct mii_bus *bus = context;
> u16 page, r, lo, hi;
> int ret;
>
> @@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
>
> /* MT7530 uses 31 as the pseudo port */
> ret = bus->write(bus, 0x1f, 0x1f, page);
> - if (ret < 0) {
> + if (ret < 0)
> + return ret;
> +
> + lo = bus->read(bus, 0x1f, r);
> + hi = bus->read(bus, 0x1f, 0x10);
> +
> + *val = (hi << 16) | (lo & 0xffff);
> +
> + return 0;
> +}
> +
> +static u32
> +mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
> +{
> + int ret;
> + u32 val;
> +
> + ret = regmap_read(priv->regmap, reg, &val);
> + if (ret) {
> WARN_ON_ONCE(1);
> - dev_err(&bus->dev,
> + dev_err(priv->dev,
> "failed to read mt7530 register\n");
> return 0;
> }
>
> - lo = bus->read(bus, 0x1f, r);
> - hi = bus->read(bus, 0x1f, 0x10);
> -
> - return (hi << 16) | (lo & 0xffff);
> + return val;
> }
>
> static void
> @@ -2896,22 +2921,6 @@ static const struct phylink_pcs_ops mt7530_pcs_ops = {
> .pcs_an_restart = mt7530_pcs_an_restart,
> };
>
> -static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
> -{
> - struct mt7530_priv *priv = context;
> -
> - *val = mt7530_mii_read(priv, reg);
> - return 0;
> -};
> -
> -static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
> -{
> - struct mt7530_priv *priv = context;
> -
> - mt7530_mii_write(priv, reg, val);
> - return 0;
> -};
> -
> static void
> mt7530_mdio_regmap_lock(void *mdio_lock)
> {
> @@ -2924,7 +2933,7 @@ mt7530_mdio_regmap_unlock(void *mdio_lock)
> mutex_unlock(mdio_lock);
> }
>
> -static const struct regmap_bus mt7531_regmap_bus = {
> +static const struct regmap_bus mt7530_regmap_bus = {
> .reg_write = mt7530_regmap_write,
> .reg_read = mt7530_regmap_read,
> };
> @@ -2957,7 +2966,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv)
> mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
>
> regmap = devm_regmap_init(priv->dev,
> - &mt7531_regmap_bus, priv,
> + &mt7530_regmap_bus, priv->bus,
> mt7531_pcs_config[i]);
> if (IS_ERR(regmap)) {
> ret = PTR_ERR(regmap);
> @@ -3128,6 +3137,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match);
> static int
> mt7530_probe(struct mdio_device *mdiodev)
> {
> + static struct regmap_config *regmap_config;
> struct mt7530_priv *priv;
> struct device_node *dn;
>
> @@ -3207,6 +3217,21 @@ mt7530_probe(struct mdio_device *mdiodev)
> mutex_init(&priv->reg_mutex);
> dev_set_drvdata(&mdiodev->dev, priv);
>
> + regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
> + GFP_KERNEL);
> + if (!regmap_config)
> + return -ENOMEM;
> +
> + regmap_config->reg_bits = 16;
> + regmap_config->val_bits = 32;
> + regmap_config->reg_stride = 4;
> + regmap_config->max_register = MT7530_CREV;
> + regmap_config->disable_locking = true;
> + priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
> + priv->bus, regmap_config);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> return dsa_register_switch(priv->ds);
> }
>
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index c5d29f3fc1d80..39aaca50961bd 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -754,6 +754,7 @@ struct mt753x_info {
> * @dev: The device pointer
> * @ds: The pointer to the dsa core structure
> * @bus: The bus used for the device and built-in PHY
> + * @regmap: The regmap instance representing all switch registers
> * @rstc: The pointer to reset control used by MCM
> * @core_pwr: The power supplied into the core
> * @io_pwr: The power supplied into the I/O
> @@ -774,6 +775,7 @@ struct mt7530_priv {
> struct device *dev;
> struct dsa_switch *ds;
> struct mii_bus *bus;
> + struct regmap *regmap;
> struct reset_control *rstc;
> struct regulator *core_pwr;
> struct regulator *io_pwr;
> --
> 2.39.2
>
>
@@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
}
static int
-mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
+mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
{
- struct mii_bus *bus = priv->bus;
+ struct mii_bus *bus = context;
u16 page, r, lo, hi;
int ret;
@@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
/* MT7530 uses 31 as the pseudo port */
ret = bus->write(bus, 0x1f, 0x1f, page);
if (ret < 0)
- goto err;
+ return ret;
ret = bus->write(bus, 0x1f, r, lo);
if (ret < 0)
- goto err;
+ return ret;
ret = bus->write(bus, 0x1f, 0x10, hi);
-err:
+ return ret;
+}
+
+static int
+mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
+{
+ int ret;
+
+ ret = regmap_write(priv->regmap, reg, val);
+
if (ret < 0)
- dev_err(&bus->dev,
+ dev_err(priv->dev,
"failed to write mt7530 register\n");
+
return ret;
}
-static u32
-mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
+static int
+mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
{
- struct mii_bus *bus = priv->bus;
+ struct mii_bus *bus = context;
u16 page, r, lo, hi;
int ret;
@@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
/* MT7530 uses 31 as the pseudo port */
ret = bus->write(bus, 0x1f, 0x1f, page);
- if (ret < 0) {
+ if (ret < 0)
+ return ret;
+
+ lo = bus->read(bus, 0x1f, r);
+ hi = bus->read(bus, 0x1f, 0x10);
+
+ *val = (hi << 16) | (lo & 0xffff);
+
+ return 0;
+}
+
+static u32
+mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
+{
+ int ret;
+ u32 val;
+
+ ret = regmap_read(priv->regmap, reg, &val);
+ if (ret) {
WARN_ON_ONCE(1);
- dev_err(&bus->dev,
+ dev_err(priv->dev,
"failed to read mt7530 register\n");
return 0;
}
- lo = bus->read(bus, 0x1f, r);
- hi = bus->read(bus, 0x1f, 0x10);
-
- return (hi << 16) | (lo & 0xffff);
+ return val;
}
static void
@@ -2896,22 +2921,6 @@ static const struct phylink_pcs_ops mt7530_pcs_ops = {
.pcs_an_restart = mt7530_pcs_an_restart,
};
-static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
-{
- struct mt7530_priv *priv = context;
-
- *val = mt7530_mii_read(priv, reg);
- return 0;
-};
-
-static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
-{
- struct mt7530_priv *priv = context;
-
- mt7530_mii_write(priv, reg, val);
- return 0;
-};
-
static void
mt7530_mdio_regmap_lock(void *mdio_lock)
{
@@ -2924,7 +2933,7 @@ mt7530_mdio_regmap_unlock(void *mdio_lock)
mutex_unlock(mdio_lock);
}
-static const struct regmap_bus mt7531_regmap_bus = {
+static const struct regmap_bus mt7530_regmap_bus = {
.reg_write = mt7530_regmap_write,
.reg_read = mt7530_regmap_read,
};
@@ -2957,7 +2966,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv)
mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
regmap = devm_regmap_init(priv->dev,
- &mt7531_regmap_bus, priv,
+ &mt7530_regmap_bus, priv->bus,
mt7531_pcs_config[i]);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
@@ -3128,6 +3137,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match);
static int
mt7530_probe(struct mdio_device *mdiodev)
{
+ static struct regmap_config *regmap_config;
struct mt7530_priv *priv;
struct device_node *dn;
@@ -3207,6 +3217,21 @@ mt7530_probe(struct mdio_device *mdiodev)
mutex_init(&priv->reg_mutex);
dev_set_drvdata(&mdiodev->dev, priv);
+ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
+ GFP_KERNEL);
+ if (!regmap_config)
+ return -ENOMEM;
+
+ regmap_config->reg_bits = 16;
+ regmap_config->val_bits = 32;
+ regmap_config->reg_stride = 4;
+ regmap_config->max_register = MT7530_CREV;
+ regmap_config->disable_locking = true;
+ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
+ priv->bus, regmap_config);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
return dsa_register_switch(priv->ds);
}
@@ -754,6 +754,7 @@ struct mt753x_info {
* @dev: The device pointer
* @ds: The pointer to the dsa core structure
* @bus: The bus used for the device and built-in PHY
+ * @regmap: The regmap instance representing all switch registers
* @rstc: The pointer to reset control used by MCM
* @core_pwr: The power supplied into the core
* @io_pwr: The power supplied into the I/O
@@ -774,6 +775,7 @@ struct mt7530_priv {
struct device *dev;
struct dsa_switch *ds;
struct mii_bus *bus;
+ struct regmap *regmap;
struct reset_control *rstc;
struct regulator *core_pwr;
struct regulator *io_pwr;