[1/2] arm64: dts: ti: k3-j784s4-mcu-wakeup: Fix IO PADCONFIG size for wakeup domain

Message ID 20230316104743.482972-2-sabiya.d@ti.com
State New
Headers
Series Fix WKUP domain IO PADCONFIG size issue and RPi header support |

Commit Message

Dasnavis Sabiya March 16, 2023, 10:47 a.m. UTC
  From: Dasnavis Sabiya <sabiya.d@ti.com>

The size of IO PADCONFIG register set of the wakeup domain is incorrect for
J784S4. Update the PADCONFIG offset size to the correct value for
J784S4 SoC.

Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
  

Comments

Vaishnav Achath March 29, 2023, 7:49 a.m. UTC | #1
Hi Sabiya,

On 16/03/23 16:17, sabiya.d@mistralsolutions.com wrote:
> From: Dasnavis Sabiya <sabiya.d@ti.com>
> 
> The size of IO PADCONFIG register set of the wakeup domain is incorrect for
> J784S4. Update the PADCONFIG offset size to the correct value for
> J784S4 SoC.
> 
> Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
> Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> index 64bd3dee14aa..c0103513c64c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
> @@ -50,7 +50,7 @@ mcu_ram: sram@41c00000 {
>  	wkup_pmx0: pinctrl@4301c000 {
>  		compatible = "pinctrl-single";
>  		/* Proxy 0 addressing */
> -		reg = <0x00 0x4301c000 0x00 0x178>;
> +		reg = <0x00 0x4301c000 0x00 0x194>;
>  		#pinctrl-cells = <1>;
>  		pinctrl-single,register-width = <32>;
>  		pinctrl-single,function-mask = <0xffffffff>;

Similar feedback as for the J721S2 PADCONFIG patch, see the discussion below,

https://lore.kernel.org/all/20230328114742.tnaa5hi3qm3rsgld@ecology/

As suggested by Nishanth, let us do a single fixup to avoid non-addressable
regions and fix the padconfig region size.

From datasheet I can see that the addresses corresponding to WKUP_PADCONFIG13,
WKUP_PADCONFIG25 are missing for J784S4.
  

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 64bd3dee14aa..c0103513c64c 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -50,7 +50,7 @@  mcu_ram: sram@41c00000 {
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-		reg = <0x00 0x4301c000 0x00 0x178>;
+		reg = <0x00 0x4301c000 0x00 0x194>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;