[v2,2/4] ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
Commit Message
The Allwinner T113-s SoC is apparently using the same (or at least a very
similar) die as the D1/D1s, but replaces the single RISC-V core with
two Arm Cortex-A7 cores.
Since the D1 core .dtsi already describes all common peripherals, we
just need a DT describing the ARM specific peripherals: the CPU cores,
the Generic Timer, the GIC and the PMU.
We include the core .dtsi directly from the riscv DT directory.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm/boot/dts/sun8i-t113s.dtsi | 59 ++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-t113s.dtsi
Comments
Dne ponedeljek, 20. marec 2023 ob 01:52:47 CET je Andre Przywara napisal(a):
> The Allwinner T113-s SoC is apparently using the same (or at least a very
> similar) die as the D1/D1s, but replaces the single RISC-V core with
> two Arm Cortex-A7 cores.
> Since the D1 core .dtsi already describes all common peripherals, we
> just need a DT describing the ARM specific peripherals: the CPU cores,
> the Generic Timer, the GIC and the PMU.
> We include the core .dtsi directly from the riscv DT directory.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
new file mode 100644
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
+ };
+ };
+
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x03021000 0x1000>,
+ <0x03022000 0x2000>,
+ <0x03024000 0x2000>,
+ <0x03026000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+};