ARM: dts: lan966x: Enable sgpio on pcb8291

Message ID 20221019075154.2555054-1-horatiu.vultur@microchip.com
State New
Headers
Series ARM: dts: lan966x: Enable sgpio on pcb8291 |

Commit Message

Horatiu Vultur Oct. 19, 2022, 7:51 a.m. UTC
  Enable sgpio node on pcb8291 as this is needed to be able to control
the LEDs on this board. Otherwise the LEDs support on the board will
not be available.
On the other board pcb8309 the sgpio is already enabled because it
needed to access the SFP ports.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
  

Comments

Claudiu Beznea Oct. 26, 2022, 7:47 a.m. UTC | #1
Hi, Horatiu,

On 19.10.2022 10:51, Horatiu Vultur wrote:
> Enable sgpio node on pcb8291 as this is needed to be able to control
> the LEDs on this board. Otherwise the LEDs support on the board will
> not be available.

Do we need a fixes tag for this?

> On the other board pcb8309 the sgpio is already enabled because it
> needed to access the SFP ports.
> 
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
>  arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
> index f4f054cdf2a87..3a3d76af86122 100644
> --- a/arch/arm/boot/dts/lan966x-pcb8291.dts
> +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
> @@ -69,6 +69,12 @@ can0_b_pins:  can0-b-pins {
>  		pins = "GPIO_35", "GPIO_36";
>  		function = "can0_b";
>  	};
> +
> +	sgpio_a_pins: sgpio-a-pins {
> +		/* SCK, D0, D1, LD */
> +		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
> +		function = "sgpio_a";
> +	};
>  };
>  
>  &can0 {
> @@ -118,6 +124,20 @@ &serdes {
>  	status = "okay";
>  };
>  
> +&sgpio {
> +	pinctrl-0 = <&sgpio_a_pins>;
> +	pinctrl-names = "default";
> +	microchip,sgpio-port-ranges = <0 3>, <8 11>;
> +	status = "okay";
> +
> +	gpio@0 {
> +		ngpios = <64>;
> +	};
> +	gpio@1 {
> +		ngpios = <64>;
> +	};
> +};
> +
>  &switch {
>  	status = "okay";
>  };
  
Horatiu Vultur Oct. 26, 2022, 5:38 p.m. UTC | #2
The 10/26/2022 07:47, Claudiu Beznea - M18063 wrote:
> Hi, Horatiu,

Hi Claudiu,

> 
> On 19.10.2022 10:51, Horatiu Vultur wrote:
> > Enable sgpio node on pcb8291 as this is needed to be able to control
> > the LEDs on this board. Otherwise the LEDs support on the board will
> > not be available.
> 
> Do we need a fixes tag for this?

I was not 100% sure that I need to add the tag, but I will send
another version where I will add the tag.

> 
> > On the other board pcb8309 the sgpio is already enabled because it
> > needed to access the SFP ports.
> > 
> > Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> > ---
> >  arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
> > index f4f054cdf2a87..3a3d76af86122 100644
> > --- a/arch/arm/boot/dts/lan966x-pcb8291.dts
> > +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
> > @@ -69,6 +69,12 @@ can0_b_pins:  can0-b-pins {
> >  		pins = "GPIO_35", "GPIO_36";
> >  		function = "can0_b";
> >  	};
> > +
> > +	sgpio_a_pins: sgpio-a-pins {
> > +		/* SCK, D0, D1, LD */
> > +		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
> > +		function = "sgpio_a";
> > +	};
> >  };
> >  
> >  &can0 {
> > @@ -118,6 +124,20 @@ &serdes {
> >  	status = "okay";
> >  };
> >  
> > +&sgpio {
> > +	pinctrl-0 = <&sgpio_a_pins>;
> > +	pinctrl-names = "default";
> > +	microchip,sgpio-port-ranges = <0 3>, <8 11>;
> > +	status = "okay";
> > +
> > +	gpio@0 {
> > +		ngpios = <64>;
> > +	};
> > +	gpio@1 {
> > +		ngpios = <64>;
> > +	};
> > +};
> > +
> >  &switch {
> >  	status = "okay";
> >  };
>
  

Patch

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index f4f054cdf2a87..3a3d76af86122 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -69,6 +69,12 @@  can0_b_pins:  can0-b-pins {
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@  &serdes {
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };