[v4,2/3] clk: clk-loongson2: add clock controller driver support
Commit Message
This driver provides support for clock controller on Loongson2 SoC
, the Loongson2 SoC uses a 100MHz clock as the PLL reference clock
, there are five independent PLLs inside, each of which PLL can
provide up to three sets of frequency dependent clock outputs.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
---
Change in v4:
1. Fixup clock-names that replace "xxx-clk" with "xxx".
MAINTAINERS | 1 +
arch/loongarch/Kconfig | 1 +
arch/loongarch/kernel/time.c | 3 +
drivers/clk/Kconfig | 9 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++
6 files changed, 300 insertions(+)
create mode 100644 drivers/clk/clk-loongson2.c
Comments
Hi, Yinbo,
On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote:
>
> This driver provides support for clock controller on Loongson2 SoC
> , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock
Use Loongson-2, including in commit message, Kconfig description and comments.
> , there are five independent PLLs inside, each of which PLL can
> provide up to three sets of frequency dependent clock outputs.
>
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> ---
> Change in v4:
> 1. Fixup clock-names that replace "xxx-clk" with "xxx".
>
> MAINTAINERS | 1 +
> arch/loongarch/Kconfig | 1 +
> arch/loongarch/kernel/time.c | 3 +
> drivers/clk/Kconfig | 9 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++
> 6 files changed, 300 insertions(+)
> create mode 100644 drivers/clk/clk-loongson2.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b6aae412de9c..f01d60cd5c3b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER
> M: Yinbo Zhu <zhuyinbo@loongson.cn>
> L: linux-clk@vger.kernel.org
> S: Maintained
> +F: drivers/clk/clk-loongson2.c
> F: include/dt-bindings/clock/loongson,ls2k-clk.h
>
> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 26aeb1408e56..8b65f349cd6e 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -122,6 +122,7 @@ config LOONGARCH
> select USE_PERCPU_NUMA_NODE_ID
> select USER_STACKTRACE_SUPPORT
> select ZONE_DMA32
> + select COMMON_CLK
>
> config 32BIT
> bool
> diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c
> index 786735dcc8d6..09f20bc81798 100644
> --- a/arch/loongarch/kernel/time.c
> +++ b/arch/loongarch/kernel/time.c
> @@ -12,6 +12,7 @@
> #include <linux/kernel.h>
> #include <linux/sched_clock.h>
> #include <linux/spinlock.h>
> +#include <linux/of_clk.h>
>
> #include <asm/cpu-features.h>
> #include <asm/loongarch.h>
> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void)
>
> void __init time_init(void)
> {
> + of_clk_init(NULL);
> +
> if (!cpu_has_cpucfg)
> const_clock_freq = cpu_clock_freq;
> else
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 48f8f4221e21..88620f86373f 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -428,6 +428,15 @@ config COMMON_CLK_K210
> help
> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>
> +config COMMON_CLK_LOONGSON2
> + bool "Clock driver for Loongson2 SoC"
> + depends on COMMON_CLK && OF
> + help
> + This driver provides support for Clock Controller that base on
> + Common Clock Framework Controller (CCF) on Loongson2 SoC. The
> + Clock Controller can generates and supplies clock to various
> + peripherals within the SoC.
> +
> source "drivers/clk/actions/Kconfig"
> source "drivers/clk/analogbits/Kconfig"
> source "drivers/clk/baikal-t1/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index d5db170d38d2..8ccc7436052f 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
> obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
> +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o
>
> # please keep this section sorted lexicographically by directory path name
> obj-y += actions/
> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
> new file mode 100644
> index 000000000000..359fede40112
> --- /dev/null
> +++ b/drivers/clk/clk-loongson2.c
> @@ -0,0 +1,285 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Author: Yinbo Zhu <zhuyinbo@loongson.cn>
> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
Why 2023?
Huacai
> + */
> +
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <dt-bindings/clock/loongson,ls2k-clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/slab.h>
> +#include <linux/clk.h>
> +
> +#define LOONGSON2_PLL_MULT_SHIFT 32
> +#define LOONGSON2_PLL_MULT_WIDTH 10
> +#define LOONGSON2_PLL_DIV_SHIFT 26
> +#define LOONGSON2_PLL_DIV_WIDTH 6
> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20
> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3
> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16
> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3
> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
> +
> +void __iomem *loongson2_pll_base;
> +static DEFINE_SPINLOCK(loongson2_clk_lock);
> +static struct clk_hw **hws;
> +static struct clk_hw_onecell_data *clk_hw_data;
> +
> +static struct clk_hw *loongson2_clk_register(struct device *dev,
> + const char *name,
> + const char *parent_name,
> + const struct clk_ops *ops,
> + unsigned long flags)
> +{
> + int ret;
> + struct clk_hw *hw;
> + struct clk_init_data init;
> +
> + /* allocate the divider */
> + hw = kzalloc(sizeof(*hw), GFP_KERNEL);
> + if (!hw)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = ops;
> + init.flags = flags | CLK_IS_BASIC;
> + init.parent_names = (parent_name ? &parent_name : NULL);
> + init.num_parents = (parent_name ? 1 : 0);
> + hw->init = &init;
> +
> + /* register the clock */
> + ret = clk_hw_register(dev, hw);
> + if (ret) {
> + kfree(hw);
> + hw = ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
> +static struct clk_hw *loongson2_clk_pll_register(const char *name,
> + const char *parent, void __iomem *reg)
> +{
> + u64 val;
> + u32 mult = 1, div = 1;
> +
> + val = readq((void *)reg);
> +
> + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
> + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
> + div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
> + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
> +
> + return clk_hw_register_fixed_factor(NULL, name, parent,
> + CLK_SET_RATE_PARENT, mult, div);
> +}
> +
> +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_apb_clk_ops = {
> + .recalc_rate = loongson2_apb_recalc_rate,
> +};
> +
> +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_usb_clk_ops = {
> + .recalc_rate = loongson2_usb_recalc_rate,
> +};
> +
> +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + u64 val;
> + u32 mult;
> + unsigned long rate;
> +
> + val = readq((void *)(loongson2_pll_base + 0x50));
> +
> + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) &
> + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH);
> +
> + rate = parent_rate * (mult + 1);
> + do_div(rate, 8);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops loongson2_sata_clk_ops = {
> + .recalc_rate = loongson2_sata_recalc_rate,
> +};
> +
> +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < count; i++)
> + if (IS_ERR(clks[i]))
> + pr_err("Loongson2 clk %u: register failed with %ld\n"
> + , i, PTR_ERR(clks[i]));
> +}
> +
> +static struct clk_hw *loongson2_obtain_fixed_clk_hw(
> + struct device_node *np,
> + const char *name)
> +{
> + struct clk *clk;
> +
> + clk = of_clk_get_by_name(np, name);
> + if (IS_ERR(clk))
> + return ERR_PTR(-ENOENT);
> +
> + return __clk_get_hw(clk);
> +}
> +
> +static void __init loongson2_clocks_init(struct device_node *np)
> +{
> + loongson2_pll_base = of_iomap(np, 0);
> +
> + if (!loongson2_pll_base) {
> + pr_err("clk: unable to map loongson2 clk registers\n");
> + goto err;
> + }
> +
> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
> + GFP_KERNEL);
> + if (WARN_ON(!clk_hw_data))
> + goto err;
> +
> + clk_hw_data->num = LOONGSON2_CLK_END;
> + hws = clk_hw_data->hws;
> +
> + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np,
> + "ref_100m");
> +
> + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll",
> + "ref_100m",
> + loongson2_pll_base);
> +
> + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x10);
> +
> + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x20);
> +
> + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x30);
> +
> + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll",
> + "ref_100m",
> + loongson2_pll_base + 0x40);
> +
> + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
> + "node_pll", 0,
> + loongson2_pll_base + 0x8, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + /*
> + * The hda clk divisor in the upper 32bits and the clk-prodiver
> + * layer code doesn't support 64bit io operation thus a conversion
> + * is required that subtract shift by 32 and add 4byte to the hda
> + * address
> + */
> + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x22, 12,
> + 7, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x18, 22,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
> + "ddr_pll", 0,
> + loongson2_pll_base + 0x18, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
> + "dc_pll", 0,
> + loongson2_pll_base + 0x28, 22,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
> + "dc_pll", 0,
> + loongson2_pll_base + 0x28, 0,
> + 6, CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb",
> + "gmac",
> + &loongson2_apb_clk_ops, 0);
> +
> + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb",
> + "gmac",
> + &loongson2_usb_clk_ops, 0);
> +
> + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata",
> + "gmac",
> + &loongson2_sata_clk_ops, 0);
> +
> + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
> + "pix0_pll", 0,
> + loongson2_pll_base + 0x38, 0, 6,
> + CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
> + "pix1_pll", 0,
> + loongson2_pll_base + 0x48, 0, 6,
> + CLK_DIVIDER_ONE_BASED,
> + &loongson2_clk_lock);
> +
> + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
> +
> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
> +
> +err:
> + iounmap(loongson2_pll_base);
> +}
> +
> +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init);
> --
> 2.31.1
>
在 2022/10/26 下午8:06, Huacai Chen 写道:
> Hi, Yinbo,
>
> On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote:
>>
>> This driver provides support for clock controller on Loongson2 SoC
>> , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock
> Use Loongson-2, including in commit message, Kconfig description and comments.
okay, I will do it.
>
>> , there are five independent PLLs inside, each of which PLL can
>> provide up to three sets of frequency dependent clock outputs.
>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>> ---
>> Change in v4:
>> 1. Fixup clock-names that replace "xxx-clk" with "xxx".
>>
>> MAINTAINERS | 1 +
>> arch/loongarch/Kconfig | 1 +
>> arch/loongarch/kernel/time.c | 3 +
>> drivers/clk/Kconfig | 9 ++
>> drivers/clk/Makefile | 1 +
>> drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++
>> 6 files changed, 300 insertions(+)
>> create mode 100644 drivers/clk/clk-loongson2.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index b6aae412de9c..f01d60cd5c3b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER
>> M: Yinbo Zhu <zhuyinbo@loongson.cn>
>> L: linux-clk@vger.kernel.org
>> S: Maintained
>> +F: drivers/clk/clk-loongson2.c
>> F: include/dt-bindings/clock/loongson,ls2k-clk.h
>>
>> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
>> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
>> index 26aeb1408e56..8b65f349cd6e 100644
>> --- a/arch/loongarch/Kconfig
>> +++ b/arch/loongarch/Kconfig
>> @@ -122,6 +122,7 @@ config LOONGARCH
>> select USE_PERCPU_NUMA_NODE_ID
>> select USER_STACKTRACE_SUPPORT
>> select ZONE_DMA32
>> + select COMMON_CLK
>>
>> config 32BIT
>> bool
>> diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c
>> index 786735dcc8d6..09f20bc81798 100644
>> --- a/arch/loongarch/kernel/time.c
>> +++ b/arch/loongarch/kernel/time.c
>> @@ -12,6 +12,7 @@
>> #include <linux/kernel.h>
>> #include <linux/sched_clock.h>
>> #include <linux/spinlock.h>
>> +#include <linux/of_clk.h>
>>
>> #include <asm/cpu-features.h>
>> #include <asm/loongarch.h>
>> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void)
>>
>> void __init time_init(void)
>> {
>> + of_clk_init(NULL);
>> +
>> if (!cpu_has_cpucfg)
>> const_clock_freq = cpu_clock_freq;
>> else
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 48f8f4221e21..88620f86373f 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -428,6 +428,15 @@ config COMMON_CLK_K210
>> help
>> Support for the Canaan Kendryte K210 RISC-V SoC clocks.
>>
>> +config COMMON_CLK_LOONGSON2
>> + bool "Clock driver for Loongson2 SoC"
>> + depends on COMMON_CLK && OF
>> + help
>> + This driver provides support for Clock Controller that base on
>> + Common Clock Framework Controller (CCF) on Loongson2 SoC. The
>> + Clock Controller can generates and supplies clock to various
>> + peripherals within the SoC.
>> +
>> source "drivers/clk/actions/Kconfig"
>> source "drivers/clk/analogbits/Kconfig"
>> source "drivers/clk/baikal-t1/Kconfig"
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index d5db170d38d2..8ccc7436052f 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
>> obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
>> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
>> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
>> +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o
>>
>> # please keep this section sorted lexicographically by directory path name
>> obj-y += actions/
>> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
>> new file mode 100644
>> index 000000000000..359fede40112
>> --- /dev/null
>> +++ b/drivers/clk/clk-loongson2.c
>> @@ -0,0 +1,285 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Author: Yinbo Zhu <zhuyinbo@loongson.cn>
>> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
> Why 2023?
This is the plan time from sending a patch to being accepted by the
community.
>
> Huacai
>> + */
>> +
>> +#include <linux/clkdev.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <dt-bindings/clock/loongson,ls2k-clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/slab.h>
>> +#include <linux/clk.h>
>> +
>> +#define LOONGSON2_PLL_MULT_SHIFT 32
>> +#define LOONGSON2_PLL_MULT_WIDTH 10
>> +#define LOONGSON2_PLL_DIV_SHIFT 26
>> +#define LOONGSON2_PLL_DIV_WIDTH 6
>> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20
>> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3
>> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16
>> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3
>> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
>> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
>> +
>> +void __iomem *loongson2_pll_base;
>> +static DEFINE_SPINLOCK(loongson2_clk_lock);
>> +static struct clk_hw **hws;
>> +static struct clk_hw_onecell_data *clk_hw_data;
>> +
>> +static struct clk_hw *loongson2_clk_register(struct device *dev,
>> + const char *name,
>> + const char *parent_name,
>> + const struct clk_ops *ops,
>> + unsigned long flags)
>> +{
>> + int ret;
>> + struct clk_hw *hw;
>> + struct clk_init_data init;
>> +
>> + /* allocate the divider */
>> + hw = kzalloc(sizeof(*hw), GFP_KERNEL);
>> + if (!hw)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.ops = ops;
>> + init.flags = flags | CLK_IS_BASIC;
>> + init.parent_names = (parent_name ? &parent_name : NULL);
>> + init.num_parents = (parent_name ? 1 : 0);
>> + hw->init = &init;
>> +
>> + /* register the clock */
>> + ret = clk_hw_register(dev, hw);
>> + if (ret) {
>> + kfree(hw);
>> + hw = ERR_PTR(ret);
>> + }
>> +
>> + return hw;
>> +}
>> +
>> +static struct clk_hw *loongson2_clk_pll_register(const char *name,
>> + const char *parent, void __iomem *reg)
>> +{
>> + u64 val;
>> + u32 mult = 1, div = 1;
>> +
>> + val = readq((void *)reg);
>> +
>> + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
>> + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
>> + div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
>> + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
>> +
>> + return clk_hw_register_fixed_factor(NULL, name, parent,
>> + CLK_SET_RATE_PARENT, mult, div);
>> +}
>> +
>> +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + u64 val;
>> + u32 mult;
>> + unsigned long rate;
>> +
>> + val = readq((void *)(loongson2_pll_base + 0x50));
>> +
>> + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) &
>> + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH);
>> +
>> + rate = parent_rate * (mult + 1);
>> + do_div(rate, 8);
>> +
>> + return rate;
>> +}
>> +
>> +static const struct clk_ops loongson2_apb_clk_ops = {
>> + .recalc_rate = loongson2_apb_recalc_rate,
>> +};
>> +
>> +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + u64 val;
>> + u32 mult;
>> + unsigned long rate;
>> +
>> + val = readq((void *)(loongson2_pll_base + 0x50));
>> +
>> + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) &
>> + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH);
>> +
>> + rate = parent_rate * (mult + 1);
>> + do_div(rate, 8);
>> +
>> + return rate;
>> +}
>> +
>> +static const struct clk_ops loongson2_usb_clk_ops = {
>> + .recalc_rate = loongson2_usb_recalc_rate,
>> +};
>> +
>> +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + u64 val;
>> + u32 mult;
>> + unsigned long rate;
>> +
>> + val = readq((void *)(loongson2_pll_base + 0x50));
>> +
>> + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) &
>> + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH);
>> +
>> + rate = parent_rate * (mult + 1);
>> + do_div(rate, 8);
>> +
>> + return rate;
>> +}
>> +
>> +static const struct clk_ops loongson2_sata_clk_ops = {
>> + .recalc_rate = loongson2_sata_recalc_rate,
>> +};
>> +
>> +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
>> +{
>> + unsigned int i;
>> +
>> + for (i = 0; i < count; i++)
>> + if (IS_ERR(clks[i]))
>> + pr_err("Loongson2 clk %u: register failed with %ld\n"
>> + , i, PTR_ERR(clks[i]));
>> +}
>> +
>> +static struct clk_hw *loongson2_obtain_fixed_clk_hw(
>> + struct device_node *np,
>> + const char *name)
>> +{
>> + struct clk *clk;
>> +
>> + clk = of_clk_get_by_name(np, name);
>> + if (IS_ERR(clk))
>> + return ERR_PTR(-ENOENT);
>> +
>> + return __clk_get_hw(clk);
>> +}
>> +
>> +static void __init loongson2_clocks_init(struct device_node *np)
>> +{
>> + loongson2_pll_base = of_iomap(np, 0);
>> +
>> + if (!loongson2_pll_base) {
>> + pr_err("clk: unable to map loongson2 clk registers\n");
>> + goto err;
>> + }
>> +
>> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
>> + GFP_KERNEL);
>> + if (WARN_ON(!clk_hw_data))
>> + goto err;
>> +
>> + clk_hw_data->num = LOONGSON2_CLK_END;
>> + hws = clk_hw_data->hws;
>> +
>> + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np,
>> + "ref_100m");
>> +
>> + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll",
>> + "ref_100m",
>> + loongson2_pll_base);
>> +
>> + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll",
>> + "ref_100m",
>> + loongson2_pll_base + 0x10);
>> +
>> + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll",
>> + "ref_100m",
>> + loongson2_pll_base + 0x20);
>> +
>> + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll",
>> + "ref_100m",
>> + loongson2_pll_base + 0x30);
>> +
>> + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll",
>> + "ref_100m",
>> + loongson2_pll_base + 0x40);
>> +
>> + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
>> + "node_pll", 0,
>> + loongson2_pll_base + 0x8, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + /*
>> + * The hda clk divisor in the upper 32bits and the clk-prodiver
>> + * layer code doesn't support 64bit io operation thus a conversion
>> + * is required that subtract shift by 32 and add 4byte to the hda
>> + * address
>> + */
>> + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x22, 12,
>> + 7, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x18, 22,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
>> + "ddr_pll", 0,
>> + loongson2_pll_base + 0x18, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
>> + "dc_pll", 0,
>> + loongson2_pll_base + 0x28, 22,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
>> + "dc_pll", 0,
>> + loongson2_pll_base + 0x28, 0,
>> + 6, CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb",
>> + "gmac",
>> + &loongson2_apb_clk_ops, 0);
>> +
>> + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb",
>> + "gmac",
>> + &loongson2_usb_clk_ops, 0);
>> +
>> + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata",
>> + "gmac",
>> + &loongson2_sata_clk_ops, 0);
>> +
>> + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
>> + "pix0_pll", 0,
>> + loongson2_pll_base + 0x38, 0, 6,
>> + CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
>> + "pix1_pll", 0,
>> + loongson2_pll_base + 0x48, 0, 6,
>> + CLK_DIVIDER_ONE_BASED,
>> + &loongson2_clk_lock);
>> +
>> + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
>> +
>> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
>> +
>> +err:
>> + iounmap(loongson2_pll_base);
>> +}
>> +
>> +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init);
>> --
>> 2.31.1
>>
@@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER
M: Yinbo Zhu <zhuyinbo@loongson.cn>
L: linux-clk@vger.kernel.org
S: Maintained
+F: drivers/clk/clk-loongson2.c
F: include/dt-bindings/clock/loongson,ls2k-clk.h
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
@@ -122,6 +122,7 @@ config LOONGARCH
select USE_PERCPU_NUMA_NODE_ID
select USER_STACKTRACE_SUPPORT
select ZONE_DMA32
+ select COMMON_CLK
config 32BIT
bool
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/sched_clock.h>
#include <linux/spinlock.h>
+#include <linux/of_clk.h>
#include <asm/cpu-features.h>
#include <asm/loongarch.h>
@@ -214,6 +215,8 @@ int __init constant_clocksource_init(void)
void __init time_init(void)
{
+ of_clk_init(NULL);
+
if (!cpu_has_cpucfg)
const_clock_freq = cpu_clock_freq;
else
@@ -428,6 +428,15 @@ config COMMON_CLK_K210
help
Support for the Canaan Kendryte K210 RISC-V SoC clocks.
+config COMMON_CLK_LOONGSON2
+ bool "Clock driver for Loongson2 SoC"
+ depends on COMMON_CLK && OF
+ help
+ This driver provides support for Clock Controller that base on
+ Common Clock Framework Controller (CCF) on Loongson2 SoC. The
+ Clock Controller can generates and supplies clock to various
+ peripherals within the SoC.
+
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
@@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o
obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o
# please keep this section sorted lexicographically by directory path name
obj-y += actions/
new file mode 100644
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Author: Yinbo Zhu <zhuyinbo@loongson.cn>
+ * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
+ */
+
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define LOONGSON2_PLL_MULT_SHIFT 32
+#define LOONGSON2_PLL_MULT_WIDTH 10
+#define LOONGSON2_PLL_DIV_SHIFT 26
+#define LOONGSON2_PLL_DIV_WIDTH 6
+#define LOONGSON2_APB_FREQSCALE_SHIFT 20
+#define LOONGSON2_APB_FREQSCALE_WIDTH 3
+#define LOONGSON2_USB_FREQSCALE_SHIFT 16
+#define LOONGSON2_USB_FREQSCALE_WIDTH 3
+#define LOONGSON2_SATA_FREQSCALE_SHIFT 12
+#define LOONGSON2_SATA_FREQSCALE_WIDTH 3
+
+void __iomem *loongson2_pll_base;
+static DEFINE_SPINLOCK(loongson2_clk_lock);
+static struct clk_hw **hws;
+static struct clk_hw_onecell_data *clk_hw_data;
+
+static struct clk_hw *loongson2_clk_register(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ const struct clk_ops *ops,
+ unsigned long flags)
+{
+ int ret;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+
+ /* allocate the divider */
+ hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ hw->init = &init;
+
+ /* register the clock */
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(hw);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+static struct clk_hw *loongson2_clk_pll_register(const char *name,
+ const char *parent, void __iomem *reg)
+{
+ u64 val;
+ u32 mult = 1, div = 1;
+
+ val = readq((void *)reg);
+
+ mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
+ clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
+ div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
+ clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
+
+ return clk_hw_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u64 val;
+ u32 mult;
+ unsigned long rate;
+
+ val = readq((void *)(loongson2_pll_base + 0x50));
+
+ mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) &
+ clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH);
+
+ rate = parent_rate * (mult + 1);
+ do_div(rate, 8);
+
+ return rate;
+}
+
+static const struct clk_ops loongson2_apb_clk_ops = {
+ .recalc_rate = loongson2_apb_recalc_rate,
+};
+
+static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u64 val;
+ u32 mult;
+ unsigned long rate;
+
+ val = readq((void *)(loongson2_pll_base + 0x50));
+
+ mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) &
+ clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH);
+
+ rate = parent_rate * (mult + 1);
+ do_div(rate, 8);
+
+ return rate;
+}
+
+static const struct clk_ops loongson2_usb_clk_ops = {
+ .recalc_rate = loongson2_usb_recalc_rate,
+};
+
+static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u64 val;
+ u32 mult;
+ unsigned long rate;
+
+ val = readq((void *)(loongson2_pll_base + 0x50));
+
+ mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) &
+ clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH);
+
+ rate = parent_rate * (mult + 1);
+ do_div(rate, 8);
+
+ return rate;
+}
+
+static const struct clk_ops loongson2_sata_clk_ops = {
+ .recalc_rate = loongson2_sata_recalc_rate,
+};
+
+static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
+{
+ unsigned int i;
+
+ for (i = 0; i < count; i++)
+ if (IS_ERR(clks[i]))
+ pr_err("Loongson2 clk %u: register failed with %ld\n"
+ , i, PTR_ERR(clks[i]));
+}
+
+static struct clk_hw *loongson2_obtain_fixed_clk_hw(
+ struct device_node *np,
+ const char *name)
+{
+ struct clk *clk;
+
+ clk = of_clk_get_by_name(np, name);
+ if (IS_ERR(clk))
+ return ERR_PTR(-ENOENT);
+
+ return __clk_get_hw(clk);
+}
+
+static void __init loongson2_clocks_init(struct device_node *np)
+{
+ loongson2_pll_base = of_iomap(np, 0);
+
+ if (!loongson2_pll_base) {
+ pr_err("clk: unable to map loongson2 clk registers\n");
+ goto err;
+ }
+
+ clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
+ GFP_KERNEL);
+ if (WARN_ON(!clk_hw_data))
+ goto err;
+
+ clk_hw_data->num = LOONGSON2_CLK_END;
+ hws = clk_hw_data->hws;
+
+ hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np,
+ "ref_100m");
+
+ hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll",
+ "ref_100m",
+ loongson2_pll_base);
+
+ hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll",
+ "ref_100m",
+ loongson2_pll_base + 0x10);
+
+ hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll",
+ "ref_100m",
+ loongson2_pll_base + 0x20);
+
+ hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll",
+ "ref_100m",
+ loongson2_pll_base + 0x30);
+
+ hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll",
+ "ref_100m",
+ loongson2_pll_base + 0x40);
+
+ hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
+ "node_pll", 0,
+ loongson2_pll_base + 0x8, 0,
+ 6, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ /*
+ * The hda clk divisor in the upper 32bits and the clk-prodiver
+ * layer code doesn't support 64bit io operation thus a conversion
+ * is required that subtract shift by 32 and add 4byte to the hda
+ * address
+ */
+ hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
+ "ddr_pll", 0,
+ loongson2_pll_base + 0x22, 12,
+ 7, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
+ "ddr_pll", 0,
+ loongson2_pll_base + 0x18, 22,
+ 6, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
+ "ddr_pll", 0,
+ loongson2_pll_base + 0x18, 0,
+ 6, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
+ "dc_pll", 0,
+ loongson2_pll_base + 0x28, 22,
+ 6, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
+ "dc_pll", 0,
+ loongson2_pll_base + 0x28, 0,
+ 6, CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb",
+ "gmac",
+ &loongson2_apb_clk_ops, 0);
+
+ hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb",
+ "gmac",
+ &loongson2_usb_clk_ops, 0);
+
+ hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata",
+ "gmac",
+ &loongson2_sata_clk_ops, 0);
+
+ hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
+ "pix0_pll", 0,
+ loongson2_pll_base + 0x38, 0, 6,
+ CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
+ "pix1_pll", 0,
+ loongson2_pll_base + 0x48, 0, 6,
+ CLK_DIVIDER_ONE_BASED,
+ &loongson2_clk_lock);
+
+ loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
+
+ of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
+
+err:
+ iounmap(loongson2_pll_base);
+}
+
+CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init);