diff mbox series

[2/2] phy: qcom-qmp-ufs: Add SM7150 support

Message ID 20230309185049.170878-3-danila@jiaxyga.com
State New
Headers
Series phy: qcom-qmp-ufs: Add support for SM7150 |

Commit Message

Danila Tikhonov March 9, 2023, 6:50 p.m. UTC 
  From: David Wronek <davidwronek@gmail.com>

Add the tables and constants for init sequences for UFS QMP phy found in
SM7150 SoC.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 57 +++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

Comments

Dmitry Baryshkov March 9, 2023, 8:51 p.m. UTC | #1 
On Thu, 9 Mar 2023 at 20:51, Danila Tikhonov <danila@jiaxyga.com> wrote:
>
> From: David Wronek <davidwronek@gmail.com>
>
> Add the tables and constants for init sequences for UFS QMP phy found in
> SM7150 SoC.
>
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 57 +++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 994ddd5d4a81..b4f2d6c63beb 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -349,6 +349,36 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = {
>         QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
>  };
>
> +static const struct qmp_phy_init_tbl sm7150_ufsphy_rx[] = {
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5b),

It is a pity to duplicate the whole table just for the single register
difference.

> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> +       QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
> +};
> +
> +static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = {
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f),
> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF),

s/0xFF/0xff/ , please

> +       QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};)
> +
>  static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = {
>         QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
>         QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> @@ -911,6 +941,30 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
>         .no_pcs_sw_reset        = true,
>  };
>
> +static const struct qmp_phy_cfg sm7150_ufsphy_cfg = {

Please add offsets here. With that fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> +       .lanes                  = 1,
> +
> +       .tbls = {
> +               .serdes         = sdm845_ufsphy_serdes,
> +               .serdes_num     = ARRAY_SIZE(sdm845_ufsphy_serdes),
> +               .tx             = sdm845_ufsphy_tx,
> +               .tx_num         = ARRAY_SIZE(sdm845_ufsphy_tx),
> +               .rx             = sm7150_ufsphy_rx,
> +               .rx_num         = ARRAY_SIZE(sm7150_ufsphy_rx),
> +               .pcs            = sm7150_ufsphy_pcs,
> +               .pcs_num        = ARRAY_SIZE(sm7150_ufsphy_pcs),
> +       },
> +       .tbls_hs_b = {
> +               .serdes         = sdm845_ufsphy_hs_b_serdes,
> +               .serdes_num     = ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes),
> +       },
> +       .clk_list               = sdm845_ufs_phy_clk_l,
> +       .num_clks               = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> +       .vreg_list              = qmp_phy_vreg_l,
> +       .num_vregs              = ARRAY_SIZE(qmp_phy_vreg_l),
> +       .regs                   = ufsphy_v3_regs_layout,

sdm845 has .no_pcs_sw_reset set to true. Do we need to set it for this PHY?

> +};
> +
>  static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
>         .lanes                  = 2,
>
> @@ -1560,6 +1614,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
>         }, {
>                 .compatible = "qcom,sm6350-qmp-ufs-phy",
>                 .data = &sdm845_ufsphy_cfg,
> +       }, {
> +               .compatible = "qcom,sm7150-qmp-ufs-phy",
> +               .data = &sm7150_ufsphy_cfg,
>         }, {
>                 .compatible = "qcom,sm8150-qmp-ufs-phy",
>                 .data = &sm8150_ufsphy_cfg,
> --
> 2.39.2
>
kernel test robot March 9, 2023, 9:31 p.m. UTC | #2 
Hi Danila,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.3-rc1 next-20230309]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Danila-Tikhonov/dt-bindings-phy-Add-QMP-UFS-PHY-comptible-for-SM7150/20230310-025222
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20230309185049.170878-3-danila%40jiaxyga.com
patch subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM7150 support
config: arc-randconfig-r043-20230308 (https://download.01.org/0day-ci/archive/20230310/202303100518.rMD2XKLn-lkp@intel.com/config)
compiler: arc-elf-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/95e826acacaf3b5ba79c06b481199a17abed44ba
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Danila-Tikhonov/dt-bindings-phy-Add-QMP-UFS-PHY-comptible-for-SM7150/20230310-025222
        git checkout 95e826acacaf3b5ba79c06b481199a17abed44ba
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arc olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arc SHELL=/bin/bash drivers/phy/qualcomm/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303100518.rMD2XKLn-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:380:3: error: expected identifier or '(' before ')' token
     380 | };)
         |   ^
>> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:972:35: error: 'sm8150_ufsphy_serdes' undeclared here (not in a function); did you mean 'sm8550_ufsphy_serdes'?
     972 |                 .serdes         = sm8150_ufsphy_serdes,
         |                                   ^~~~~~~~~~~~~~~~~~~~
         |                                   sm8550_ufsphy_serdes
   In file included from include/linux/container_of.h:5,
                    from include/linux/kernel.h:21,
                    from include/linux/clk.h:13,
                    from drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:6:
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/compiler.h:232:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     232 | #define __must_be_array(a)      BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/kernel.h:55:59: note: in expansion of macro '__must_be_array'
      55 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
         |                                                           ^~~~~~~~~~~~~~~
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:973:35: note: in expansion of macro 'ARRAY_SIZE'
     973 |                 .serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
         |                                   ^~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/compiler.h:232:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     232 | #define __must_be_array(a)      BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/kernel.h:55:59: note: in expansion of macro '__must_be_array'
      55 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
         |                                                           ^~~~~~~~~~~~~~~
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:1005:35: note: in expansion of macro 'ARRAY_SIZE'
    1005 |                 .serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
         |                                   ^~~~~~~~~~


vim +380 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

   370	
   371	static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = {
   372		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f),
   373		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
   374		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
   375		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03),
   376		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
   377		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f),
   378		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF),
   379		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 > 380	};)
   381
kernel test robot March 9, 2023, 10:42 p.m. UTC | #3 
Hi Danila,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.3-rc1 next-20230309]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Danila-Tikhonov/dt-bindings-phy-Add-QMP-UFS-PHY-comptible-for-SM7150/20230310-025222
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20230309185049.170878-3-danila%40jiaxyga.com
patch subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM7150 support
config: arm64-randconfig-r023-20230308 (https://download.01.org/0day-ci/archive/20230310/202303100615.2vRPxq4R-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/95e826acacaf3b5ba79c06b481199a17abed44ba
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Danila-Tikhonov/dt-bindings-phy-Add-QMP-UFS-PHY-comptible-for-SM7150/20230310-025222
        git checkout 95e826acacaf3b5ba79c06b481199a17abed44ba
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/phy/qualcomm/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Link: https://lore.kernel.org/oe-kbuild-all/202303100615.2vRPxq4R-lkp@intel.com/

All errors (new ones prefixed by >>):

>> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:380:3: error: expected identifier or '('
   };)
     ^
>> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:972:14: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
                   .serdes         = sm8150_ufsphy_serdes,
                                     ^
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:973:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
                   .serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
                                                ^
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:973:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:973:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:1004:14: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
                   .serdes         = sm8150_ufsphy_serdes,
                                     ^
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:1005:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
                   .serdes_num     = ARRAY_SIZE(sm8150_ufsphy_serdes),
                                                ^
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:1005:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
   drivers/phy/qualcomm/phy-qcom-qmp-ufs.c:1005:28: error: use of undeclared identifier 'sm8150_ufsphy_serdes'
   9 errors generated.


vim +380 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

   370	
   371	static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = {
   372		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f),
   373		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
   374		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
   375		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03),
   376		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
   377		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f),
   378		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF),
   379		QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 > 380	};)
   381
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 994ddd5d4a81..b4f2d6c63beb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -349,6 +349,36 @@  static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 };
 
+static const struct qmp_phy_init_tbl sm7150_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};)
+
 static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
@@ -911,6 +941,30 @@  static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
 	.no_pcs_sw_reset	= true,
 };
 
+static const struct qmp_phy_cfg sm7150_ufsphy_cfg = {
+	.lanes			= 1,
+
+	.tbls = {
+		.serdes		= sdm845_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sdm845_ufsphy_serdes),
+		.tx		= sdm845_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sdm845_ufsphy_tx),
+		.rx		= sm7150_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm7150_ufsphy_rx),
+		.pcs		= sm7150_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm7150_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sdm845_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= ufsphy_v3_regs_layout,
+};
+
 static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1560,6 +1614,9 @@  static const struct of_device_id qmp_ufs_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm6350-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sm7150-qmp-ufs-phy",
+		.data = &sm7150_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sm8150-qmp-ufs-phy",
 		.data = &sm8150_ufsphy_cfg,