[2/3] usb: cdns3: add StarFive JH7110 USB glue layer

Message ID 20230306095339.26006-1-minda.chen@starfivetech.com
State New
Headers
Series [1/3] dt-bindings: phy: Add StarFive JH7110 USB dt-binding |

Commit Message

Minda Chen March 6, 2023, 9:53 a.m. UTC
  There is a Cadence USB3 core for JH7110 SoCs, the cdns
core is the child for this glue layer device.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 MAINTAINERS                        |   7 +
 drivers/usb/cdns3/Kconfig          |  11 +
 drivers/usb/cdns3/Makefile         |   1 +
 drivers/usb/cdns3/cdns3-starfive.c | 399 +++++++++++++++++++++++++++++
 4 files changed, 418 insertions(+)
 create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
  

Comments

Minda Chen March 7, 2023, 7:49 a.m. UTC | #1
On 2023/3/7 2:24, Emil Renner Berthing wrote:
> On Mon, 6 Mar 2023 at 10:53, Minda Chen <minda.chen@starfivetech.com> wrote:
>>
>> There is a Cadence USB3 core for JH7110 SoCs, the cdns
>> core is the child for this glue layer device.
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> ---
>>  MAINTAINERS                        |   7 +
>>  drivers/usb/cdns3/Kconfig          |  11 +
>>  drivers/usb/cdns3/Makefile         |   1 +
>>  drivers/usb/cdns3/cdns3-starfive.c | 399 +++++++++++++++++++++++++++++
>>  4 files changed, 418 insertions(+)
>>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ee21213d4388..2a9e89922cad 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19957,6 +19957,13 @@ M:     William Qiu <william.qiu@starfivetech.com>
>>  S:     Supported
>>  F:     Documentation/devicetree/bindings/soc/starfive/jh7110-syscon.yaml
>>
>> +STARFIVE JH71X0 USB PHY DRIVERS
>> +M:     Emil Renner Berthing <kernel@esmil.dk>
>> +M:     Minda Chen <minda.chen@starfivetech.com>
>> +S:     Maintained
>> +F:     Documentation/devicetree/bindings/phy/starfive,jh7110-usb*.yaml
>> +F:     drivers/usb/cdns3/cdns3-starfive.c
>> +
>>  STATIC BRANCH/CALL
>>  M:     Peter Zijlstra <peterz@infradead.org>
>>  M:     Josh Poimboeuf <jpoimboe@kernel.org>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index b98ca0a1352a..a0b0a2c5430b 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>>
>>           For example, imx8qm and imx8qxp.
>>
>> +config USB_CDNS3_STARFIVE
>> +       tristate "Cadence USB3 support on StarFive SoC platforms"
>> +       depends on SOC_STARFIVE || COMPILE_TEST || USB_CDNS3
> 
> This entry is already under "if USB_CDNS3" and SOC_STARFIVE will
> become ARCH_STARFIVE in 6.3, so
> depends ARCH_STARFIVE || COMPILE_TEST
> 
>> +       help
>> +         Say 'Y' or 'M' here if you are building for StarFive SoCs
>> +         platforms that contain Cadence USB3 controller core.
>> +
>> +         e.g. JH7110.
>> +
>> +         If you choose to build this driver as module it will
>> +         be dynamically linked and module will be called cdns3-starfive.ko
>>  endif
>>
>>  if USB_CDNS_SUPPORT
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index 61edb2f89276..48dfae75b5aa 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -24,6 +24,7 @@ endif
>>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)               += cdns3-pci-wrap.o
>>  obj-$(CONFIG_USB_CDNS3_TI)                     += cdns3-ti.o
>>  obj-$(CONFIG_USB_CDNS3_IMX)                    += cdns3-imx.o
>> +obj-$(CONFIG_USB_CDNS3_STARFIVE)               += cdns3-starfive.o
>>
>>  cdnsp-udc-pci-y                                        := cdnsp-pci.o
>>
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
>> new file mode 100644
>> index 000000000000..54d9978cfa59
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,399 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/**
>> + * cdns-starfive.c - StarFive specific Glue layer for Cadence USB Controller
>> + *
>> + * Copyright (C) 2022 Starfive, Inc.
>> + * Author:     yanhong <yanhong.wang@starfivetech.com>
> 
> Here their name is "yanhong", but below it's "YanHong Wang". I'm
> guessing the 2nd version is correct, but please make sure.
> 
>> + * Author:     Mason Huo <mason.huo@starfivetech.com>
>> + * Author:     Minda Chen <minda.chen@starfivetech.com>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/usb/otg.h>
>> +#include "core.h"
>> +
>> +#define USB_STRAP_HOST                 BIT(17)
>> +#define USB_STRAP_DEVICE               BIT(18)
>> +#define USB_STRAP_MASK                 GENMASK(18, 16)
>> +
>> +#define USB_SUSPENDM_HOST              BIT(19)
>> +#define USB_SUSPENDM_DEVICE            (0 << 19)
>> +#define USB_SUSPENDM_MASK              BIT(19)
>> +
>> +#define USB_SUSPENDM_BYPS              BIT(20)
>> +#define USB_REFCLK_MODE                        BIT(23)
>> +#define USB_PLL_EN                     BIT(22)
>> +#define USB_PDRSTN_SPLIT               BIT(17)
>> +
>> +#define PCIE_CKREF_SRC_MASK            GENMASK(19, 18)
>> +#define PCIE_CLK_SEL_MASK              GENMASK(21, 20)
>> +#define PCIE_PHY_MODE                  BIT(20)
>> +#define PCIE_PHY_MODE_MASK             GENMASK(21, 20)
>> +#define PCIE_USB3_BUS_WIDTH_MASK       GENMASK(3, 2)
>> +#define PCIE_USB3_RATE_MASK            GENMASK(6, 5)
>> +#define PCIE_USB3_RX_STANDBY_MASK      BIT(7)
>> +#define PCIE_USB3_PHY_ENABLE           BIT(4)
>> +#define PCIE_USB3_PHY_PLL_CTL_OFF      (0x1f * 4)
>> +
>> +#define USB_125M_CLK_RATE              125000000
>> +
>> +#define USB_LS_KEEPALIVE_OFF           0x4
>> +#define USB_LS_KEEPALIVE_ENABLE                BIT(4)
>> +
>> +#define USB3_DOWN_SS_MODE              BIT(4)
>> +
>> +struct cdns_starfive {
>> +       struct device *dev;
>> +       struct regmap *stg_syscon;
>> +       struct regmap *sys_syscon;
>> +       struct reset_control *resets;
>> +       struct clk_bulk_data *clks;
>> +       int num_clks;
>> +       struct clk *usb_125m_clk;
>> +       u32 sys_offset;
>> +       u32 stg_offset_4;
>> +       u32 stg_offset_196;
>> +       u32 stg_offset_328;
>> +       u32 stg_offset_500;
>> +       bool usb2_only;
>> +       enum usb_dr_mode mode;
>> +       void __iomem *phybase_20;
>> +       void __iomem *phybase_30;
>> +};
>> +
>> +static int cdns_mode_init(struct platform_device *pdev,
>> +                               struct cdns_starfive *data)
>> +{
>> +       enum usb_dr_mode mode;
>> +
>> +       /* Init usb 2.0 utmi phy */
>> +       regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +               USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
>> +       regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +               USB_PLL_EN, USB_PLL_EN);
>> +       regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +               USB_REFCLK_MODE, USB_REFCLK_MODE);
>> +
>> +       if (data->usb2_only) {
>> +               /* Disconnect usb 3.0 phy mode */
>> +               regmap_update_bits(data->sys_syscon, data->sys_offset,
>> +                       USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
>> +       } else {
>> +               /* Config usb 3.0 pipe phy */
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> +                       PCIE_CKREF_SRC_MASK, 0);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> +                       PCIE_CLK_SEL_MASK, 0);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_328,
>> +                       PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +                       PCIE_USB3_BUS_WIDTH_MASK, 0);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +                       PCIE_USB3_RATE_MASK, 0);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +                       PCIE_USB3_RX_STANDBY_MASK, 0);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +                       PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
>> +
>> +               /* Connect usb 3.0 phy mode */
>> +               regmap_update_bits(data->sys_syscon, data->sys_offset,
>> +                       USB_PDRSTN_SPLIT, 0);
>> +       }
>> +       mode = usb_get_dr_mode(&pdev->dev);
>> +       data->mode = mode;
>> +
>> +       switch (mode) {
>> +       case USB_DR_MODE_HOST:
>> +               regmap_update_bits(data->stg_syscon,
>> +                       data->stg_offset_4,
>> +                       USB_STRAP_MASK,
>> +                       USB_STRAP_HOST);
>> +               regmap_update_bits(data->stg_syscon,
>> +                       data->stg_offset_4,
>> +                       USB_SUSPENDM_MASK,
>> +                       USB_SUSPENDM_HOST);
>> +               break;
>> +
>> +       case USB_DR_MODE_PERIPHERAL:
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +                       USB_STRAP_MASK, USB_STRAP_DEVICE);
>> +               regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +                       USB_SUSPENDM_MASK, USB_SUSPENDM_DEVICE);
>> +               break;
>> +
>> +       case USB_DR_MODE_UNKNOWN:
>> +       case USB_DR_MODE_OTG:
>> +       default:
>> +               break;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +
>> +static int cdns_clk_rst_init(struct cdns_starfive *data)
>> +{
>> +       int ret;
>> +
>> +       data->usb_125m_clk = devm_clk_get(data->dev, "usb_125m");
>> +       if (IS_ERR(data->usb_125m_clk)) {
>> +               dev_err(data->dev, "Failed to get usb 125m clock\n");
>> +               ret = PTR_ERR(data->usb_125m_clk);
>> +               goto exit;
>> +       }
> 
> This can be
> if (IS_ERR(data->usb_125m_clk))
>   return dev_err_probe(data->dev, PTR_ERR(data->usb_125m_clk), "Failed
> to get usb 125m clock\n");
> 
> This will also silence errors on -EPROBE_DEFER.
> 
>> +
>> +       data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
>> +       if (data->num_clks < 0) {
>> +               dev_err(data->dev, "Failed to get usb clocks\n");
>> +               ret = -ENODEV;
>> +               goto exit;
>> +       }
> 
> Again return dev_err_probe(data->dev, -ENODEV, ..
> 
>> +
>> +       /* Needs to set the USB_125M clock explicitly,
>> +        * since it's divided from pll0 clock, and the pll0 clock
>> +        * changes per the cpu frequency.
>> +        */
>> +       ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
>> +       if (ret) {
>> +               dev_err(data->dev, "Failed to set usb 125m clock\n");
>> +               goto exit;
>> +       }
> 
> return dev_err_probe
> 
>> +       ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> +       if (ret) {
>> +               dev_err(data->dev, "Failed to enable clocks\n");
>> +               goto exit;
>> +       }
> 
> return dev_err_probe
> 
>> +
>> +       data->resets = devm_reset_control_array_get_exclusive(data->dev);
>> +       if (IS_ERR(data->resets)) {
>> +               ret = PTR_ERR(data->resets);
>> +               dev_err(data->dev, "Failed to get usb resets");
>> +               goto err_clk_init;
>> +       }
> 
> This can be
> ret = dev_err_probe(data->dev, PTR_ERR(data->resets), ..)
> goto err_clk_init;
> 
>> +       ret = reset_control_deassert(data->resets);
> 
> This is where the driver fails for me, but the only place you don't
> write why. Add return dev_err_probe to be consistent.
> 
>> +       goto exit;
>> +
>> +err_clk_init:
>> +       clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +exit:
>> +       return ret;
>> +}
>> +
>> +static void cdns_starfive_set_phy(struct cdns_starfive *data)
>> +{
>> +       unsigned int val;
>> +
>> +       if (data->mode != USB_DR_MODE_PERIPHERAL) {
>> +               /* Enable the LS speed keep-alive signal */
>> +               val = readl(data->phybase_20 + USB_LS_KEEPALIVE_OFF);
>> +               val |= USB_LS_KEEPALIVE_ENABLE;
>> +               writel(val, data->phybase_20 + USB_LS_KEEPALIVE_OFF);
>> +       }
>> +
>> +       if (!data->usb2_only) {
>> +               /* Configuare spread-spectrum mode: down-spread-spectrum */
>> +               writel(USB3_DOWN_SS_MODE, data->phybase_30 + PCIE_USB3_PHY_PLL_CTL_OFF);
>> +       }
>> +}
>> +
>> +static int cdns_starfive_phy_init(struct platform_device *pdev,
>> +                                                       struct cdns_starfive *data)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       int ret = 0;
>> +
>> +       data->phybase_20 = devm_platform_ioremap_resource_byname(pdev, "usb2");
>> +       if (IS_ERR(data->phybase_20)) {
>> +               dev_err(dev, "Can't map phybase_20 IOMEM resource\n");
>> +               ret = PTR_ERR(data->phybase_20);
>> +               goto get_res_err;
>> +       }
> 
> return dev_err_probe(dev, PTR_ERROR(...
> 
>> +
>> +       data->phybase_30 = devm_platform_ioremap_resource_byname(pdev, "usb3");
>> +       if (IS_ERR(data->phybase_30)) {
>> +               dev_err(dev, "Can't map phybase_30 IOMEM resource\n");
>> +               ret = PTR_ERR(data->phybase_30);
>> +               goto get_res_err;
>> +       }
> 
> return dev_err_probe
> 
>> +
>> +       cdns_starfive_set_phy(data);
>> +
>> +get_res_err:
>> +       return ret;
> 
> now this can just be return 0;
> 
>> +}
>> +
>> +static int cdns_starfive_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *node = pdev->dev.of_node;
>> +       struct cdns_starfive *data;
>> +       struct of_phandle_args args;
>> +       int ret;
>> +
>> +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +       if (!data)
>> +               return -ENOMEM;
>> +
>> +       platform_set_drvdata(pdev, data);
>> +
>> +       data->dev = dev;
>> +
>> +       data->usb2_only = device_property_read_bool(dev, "starfive,usb2-only");
>> +       ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
>> +                                               "starfive,stg-syscon", 4, 0, &args);
> 
> This looks like syscon_regmap_lookup_by_phandle_args
> 
>> +       if (ret < 0) {
>> +               dev_err(dev, "Failed to parse starfive,stg-syscon\n");
>> +               return -EINVAL;
>> +       }
> 
> return dev_err_probe(dev, ret, ..
> 
>> +       data->stg_syscon = syscon_node_to_regmap(args.np);
>> +       of_node_put(args.np);
>> +       if (IS_ERR(data->stg_syscon))
>> +               return PTR_ERR(data->stg_syscon);
>> +       data->stg_offset_4 = args.args[0];
>> +       data->stg_offset_196 = args.args[1];
>> +       data->stg_offset_328 = args.args[2];
>> +       data->stg_offset_500 = args.args[3];
>> +
>> +       ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
>> +                                               "starfive,sys-syscon", 1, 0, &args);
> 
> syscon_regmap_lookup_by_phandle_args
> 
>> +       if (ret < 0) {
>> +               dev_err(dev, "Failed to parse starfive,sys-syscon\n");
>> +               return -EINVAL;
>> +       }
>> +
>> +       data->sys_syscon = syscon_node_to_regmap(args.np);
>> +       of_node_put(args.np);
>> +       if (IS_ERR(data->sys_syscon))
>> +               return PTR_ERR(data->sys_syscon);
>> +       data->sys_offset = args.args[0];
>> +
>> +       cdns_mode_init(pdev, data);
>> +
>> +       ret = cdns_clk_rst_init(data);
>> +       if (ret < 0) {
>> +               dev_err(&pdev->dev, "Failed to init usb clk reset: %d\n", ret);
>> +               goto exit;
>> +       }
> 
> cdns_clk_rst_init already logs errors, so just
> if (ret)
>   return ret;
> 
>> +       ret = cdns_starfive_phy_init(pdev, data);
>> +       if (ret) {
>> +               dev_err(dev, "Failed to init sratfive usb phy: %d\n", ret);
>> +               goto exit;
>> +       }
> 
> if (ret)
>   return ret;
> 
>> +       ret = of_platform_populate(node, NULL, NULL, dev);
>> +       if (ret) {
>> +               dev_err(dev, "Failed to create children: %d\n", ret);
>> +               goto exit;
>> +       }
> 
> return dev_err_probe(dev, ret, "Failed to create children\n")
> 
>> +       device_set_wakeup_capable(dev, true);
>> +       pm_runtime_set_active(dev);
>> +       pm_runtime_enable(dev);
>> +
>> +       dev_info(dev, "usb mode %d %s probe success\n",
>> +               data->mode, data->usb2_only ? "2.0" : "3.0");
>> +
>> +       return 0;
>> +exit:
>> +       return ret;
>> +}
>> +
>> +static int cdns_starfive_remove_core(struct device *dev, void *c)
>> +{
>> +       struct platform_device *pdev = to_platform_device(dev);
>> +
>> +       platform_device_unregister(pdev);
>> +
>> +       return 0;
>> +}
>> +
>> +static int cdns_starfive_remove(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> +       pm_runtime_get_sync(dev);
>> +       device_for_each_child(dev, NULL, cdns_starfive_remove_core);
>> +
>> +       reset_control_assert(data->resets);
>> +       clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +       pm_runtime_disable(dev);
>> +       pm_runtime_put_noidle(dev);
>> +       platform_set_drvdata(pdev, NULL);
>> +
>> +       return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int cdns_starfive_resume(struct device *dev)
>> +{
>> +       struct cdns_starfive *data = dev_get_drvdata(dev);
>> +       int ret;
>> +
>> +       ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
>> +       if (ret)
>> +               goto err;
> 
> return ret;
> 
>> +
>> +       ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> +       if (ret)
>> +               goto err;
> 
> return ret;
> 
>> +       ret = reset_control_deassert(data->resets);
>> +       if (ret)
>> +               goto err;
> 
> return ret;
>> +       cdns_starfive_set_phy(data);
>> +err:
>> +       return ret;
> now this can just be return 0;
>> +}
>> +
>> +static int cdns_starfive_suspend(struct device *dev)
>> +{
>> +       struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> +       clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +       reset_control_assert(data->resets);
>> +
>> +       return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
>> +       SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
>> +       SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
>> +};
>> +
>> +static const struct of_device_id cdns_starfive_of_match[] = {
>> +       { .compatible = "starfive,jh7110-usb", },
>> +       {},
> 
> I like the idiom of using { /* sentinel */ } here
> 
>> +};
>> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
>> +
>> +static struct platform_driver cdns_starfive_driver = {
>> +       .probe          = cdns_starfive_probe,
>> +       .remove         = cdns_starfive_remove,
>> +       .driver         = {
>> +               .name   = "cdns3-starfive",
>> +               .of_match_table = cdns_starfive_of_match,
>> +               .pm     = &cdns_starfive_pm_ops,
>> +       },
>> +};
>> +
> 
> Empty line not needed like above.
> 

ok, thanks. I will follow all the comments and change.
>> +module_platform_driver(cdns_starfive_driver);
>> +
>> +MODULE_ALIAS("platform:cdns3-starfive");
>> +MODULE_AUTHOR("YanHong Wang <yanhong.wang@starfivetech.com>");
>> +MODULE_AUTHOR("Mason Huo <mason.huo@starfivetech.com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
>> --
>> 2.17.1
>>
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index ee21213d4388..2a9e89922cad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19957,6 +19957,13 @@  M:	William Qiu <william.qiu@starfivetech.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/soc/starfive/jh7110-syscon.yaml
 
+STARFIVE JH71X0 USB PHY DRIVERS
+M:	Emil Renner Berthing <kernel@esmil.dk>
+M:	Minda Chen <minda.chen@starfivetech.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb*.yaml
+F:	drivers/usb/cdns3/cdns3-starfive.c
+
 STATIC BRANCH/CALL
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Josh Poimboeuf <jpoimboe@kernel.org>
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index b98ca0a1352a..a0b0a2c5430b 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -78,6 +78,17 @@  config USB_CDNS3_IMX
 
 	  For example, imx8qm and imx8qxp.
 
+config USB_CDNS3_STARFIVE
+	tristate "Cadence USB3 support on StarFive SoC platforms"
+	depends on SOC_STARFIVE || COMPILE_TEST || USB_CDNS3
+	help
+	  Say 'Y' or 'M' here if you are building for StarFive SoCs
+	  platforms that contain Cadence USB3 controller core.
+
+	  e.g. JH7110.
+
+	  If you choose to build this driver as module it will
+	  be dynamically linked and module will be called cdns3-starfive.ko
 endif
 
 if USB_CDNS_SUPPORT
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 61edb2f89276..48dfae75b5aa 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -24,6 +24,7 @@  endif
 obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
 obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
 obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
+obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
 
 cdnsp-udc-pci-y					:= cdnsp-pci.o
 
diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
new file mode 100644
index 000000000000..54d9978cfa59
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-starfive.c
@@ -0,0 +1,399 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * cdns-starfive.c - StarFive specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2022 Starfive, Inc.
+ * Author:	yanhong <yanhong.wang@starfivetech.com>
+ * Author:	Mason Huo <mason.huo@starfivetech.com>
+ * Author:	Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/otg.h>
+#include "core.h"
+
+#define USB_STRAP_HOST			BIT(17)
+#define USB_STRAP_DEVICE		BIT(18)
+#define USB_STRAP_MASK			GENMASK(18, 16)
+
+#define USB_SUSPENDM_HOST		BIT(19)
+#define USB_SUSPENDM_DEVICE		(0 << 19)
+#define USB_SUSPENDM_MASK		BIT(19)
+
+#define USB_SUSPENDM_BYPS		BIT(20)
+#define USB_REFCLK_MODE			BIT(23)
+#define USB_PLL_EN			BIT(22)
+#define USB_PDRSTN_SPLIT		BIT(17)
+
+#define PCIE_CKREF_SRC_MASK		GENMASK(19, 18)
+#define PCIE_CLK_SEL_MASK		GENMASK(21, 20)
+#define PCIE_PHY_MODE			BIT(20)
+#define PCIE_PHY_MODE_MASK		GENMASK(21, 20)
+#define PCIE_USB3_BUS_WIDTH_MASK	GENMASK(3, 2)
+#define PCIE_USB3_RATE_MASK		GENMASK(6, 5)
+#define PCIE_USB3_RX_STANDBY_MASK	BIT(7)
+#define PCIE_USB3_PHY_ENABLE		BIT(4)
+#define PCIE_USB3_PHY_PLL_CTL_OFF	(0x1f * 4)
+
+#define USB_125M_CLK_RATE		125000000
+
+#define USB_LS_KEEPALIVE_OFF		0x4
+#define USB_LS_KEEPALIVE_ENABLE		BIT(4)
+
+#define USB3_DOWN_SS_MODE		BIT(4)
+
+struct cdns_starfive {
+	struct device *dev;
+	struct regmap *stg_syscon;
+	struct regmap *sys_syscon;
+	struct reset_control *resets;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct clk *usb_125m_clk;
+	u32 sys_offset;
+	u32 stg_offset_4;
+	u32 stg_offset_196;
+	u32 stg_offset_328;
+	u32 stg_offset_500;
+	bool usb2_only;
+	enum usb_dr_mode mode;
+	void __iomem *phybase_20;
+	void __iomem *phybase_30;
+};
+
+static int cdns_mode_init(struct platform_device *pdev,
+				struct cdns_starfive *data)
+{
+	enum usb_dr_mode mode;
+
+	/* Init usb 2.0 utmi phy */
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_PLL_EN, USB_PLL_EN);
+	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+		USB_REFCLK_MODE, USB_REFCLK_MODE);
+
+	if (data->usb2_only) {
+		/* Disconnect usb 3.0 phy mode */
+		regmap_update_bits(data->sys_syscon, data->sys_offset,
+			USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
+	} else {
+		/* Config usb 3.0 pipe phy */
+		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+			PCIE_CKREF_SRC_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
+			PCIE_CLK_SEL_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_328,
+			PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_BUS_WIDTH_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_RATE_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_RX_STANDBY_MASK, 0);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
+			PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
+
+		/* Connect usb 3.0 phy mode */
+		regmap_update_bits(data->sys_syscon, data->sys_offset,
+			USB_PDRSTN_SPLIT, 0);
+	}
+	mode = usb_get_dr_mode(&pdev->dev);
+	data->mode = mode;
+
+	switch (mode) {
+	case USB_DR_MODE_HOST:
+		regmap_update_bits(data->stg_syscon,
+			data->stg_offset_4,
+			USB_STRAP_MASK,
+			USB_STRAP_HOST);
+		regmap_update_bits(data->stg_syscon,
+			data->stg_offset_4,
+			USB_SUSPENDM_MASK,
+			USB_SUSPENDM_HOST);
+		break;
+
+	case USB_DR_MODE_PERIPHERAL:
+		regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+			USB_STRAP_MASK, USB_STRAP_DEVICE);
+		regmap_update_bits(data->stg_syscon, data->stg_offset_4,
+			USB_SUSPENDM_MASK, USB_SUSPENDM_DEVICE);
+		break;
+
+	case USB_DR_MODE_UNKNOWN:
+	case USB_DR_MODE_OTG:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+
+static int cdns_clk_rst_init(struct cdns_starfive *data)
+{
+	int ret;
+
+	data->usb_125m_clk = devm_clk_get(data->dev, "usb_125m");
+	if (IS_ERR(data->usb_125m_clk)) {
+		dev_err(data->dev, "Failed to get usb 125m clock\n");
+		ret = PTR_ERR(data->usb_125m_clk);
+		goto exit;
+	}
+
+	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
+	if (data->num_clks < 0) {
+		dev_err(data->dev, "Failed to get usb clocks\n");
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	/* Needs to set the USB_125M clock explicitly,
+	 * since it's divided from pll0 clock, and the pll0 clock
+	 * changes per the cpu frequency.
+	 */
+	ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+	if (ret) {
+		dev_err(data->dev, "Failed to set usb 125m clock\n");
+		goto exit;
+	}
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret) {
+		dev_err(data->dev, "Failed to enable clocks\n");
+		goto exit;
+	}
+
+	data->resets = devm_reset_control_array_get_exclusive(data->dev);
+	if (IS_ERR(data->resets)) {
+		ret = PTR_ERR(data->resets);
+		dev_err(data->dev, "Failed to get usb resets");
+		goto err_clk_init;
+	}
+	ret = reset_control_deassert(data->resets);
+	goto exit;
+
+err_clk_init:
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+exit:
+	return ret;
+}
+
+static void cdns_starfive_set_phy(struct cdns_starfive *data)
+{
+	unsigned int val;
+
+	if (data->mode != USB_DR_MODE_PERIPHERAL) {
+		/* Enable the LS speed keep-alive signal */
+		val = readl(data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+		val |= USB_LS_KEEPALIVE_ENABLE;
+		writel(val, data->phybase_20 + USB_LS_KEEPALIVE_OFF);
+	}
+
+	if (!data->usb2_only) {
+		/* Configuare spread-spectrum mode: down-spread-spectrum */
+		writel(USB3_DOWN_SS_MODE, data->phybase_30 + PCIE_USB3_PHY_PLL_CTL_OFF);
+	}
+}
+
+static int cdns_starfive_phy_init(struct platform_device *pdev,
+							struct cdns_starfive *data)
+{
+	struct device *dev = &pdev->dev;
+	int ret = 0;
+
+	data->phybase_20 = devm_platform_ioremap_resource_byname(pdev, "usb2");
+	if (IS_ERR(data->phybase_20)) {
+		dev_err(dev, "Can't map phybase_20 IOMEM resource\n");
+		ret = PTR_ERR(data->phybase_20);
+		goto get_res_err;
+	}
+
+	data->phybase_30 = devm_platform_ioremap_resource_byname(pdev, "usb3");
+	if (IS_ERR(data->phybase_30)) {
+		dev_err(dev, "Can't map phybase_30 IOMEM resource\n");
+		ret = PTR_ERR(data->phybase_30);
+		goto get_res_err;
+	}
+
+	cdns_starfive_set_phy(data);
+
+get_res_err:
+	return ret;
+}
+
+static int cdns_starfive_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct cdns_starfive *data;
+	struct of_phandle_args args;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->dev = dev;
+
+	data->usb2_only = device_property_read_bool(dev, "starfive,usb2-only");
+	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						"starfive,stg-syscon", 4, 0, &args);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse starfive,stg-syscon\n");
+		return -EINVAL;
+	}
+
+	data->stg_syscon = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(data->stg_syscon))
+		return PTR_ERR(data->stg_syscon);
+	data->stg_offset_4 = args.args[0];
+	data->stg_offset_196 = args.args[1];
+	data->stg_offset_328 = args.args[2];
+	data->stg_offset_500 = args.args[3];
+
+	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+						"starfive,sys-syscon", 1, 0, &args);
+	if (ret < 0) {
+		dev_err(dev, "Failed to parse starfive,sys-syscon\n");
+		return -EINVAL;
+	}
+
+	data->sys_syscon = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(data->sys_syscon))
+		return PTR_ERR(data->sys_syscon);
+	data->sys_offset = args.args[0];
+
+	cdns_mode_init(pdev, data);
+
+	ret = cdns_clk_rst_init(data);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to init usb clk reset: %d\n", ret);
+		goto exit;
+	}
+
+	ret = cdns_starfive_phy_init(pdev, data);
+	if (ret) {
+		dev_err(dev, "Failed to init sratfive usb phy: %d\n", ret);
+		goto exit;
+	}
+
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "Failed to create children: %d\n", ret);
+		goto exit;
+	}
+
+	device_set_wakeup_capable(dev, true);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	dev_info(dev, "usb mode %d %s probe success\n",
+		data->mode, data->usb2_only ? "2.0" : "3.0");
+
+	return 0;
+exit:
+	return ret;
+}
+
+static int cdns_starfive_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int cdns_starfive_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
+
+	reset_control_assert(data->resets);
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cdns_starfive_resume(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_set_rate(data->usb_125m_clk, USB_125M_CLK_RATE);
+	if (ret)
+		goto err;
+
+	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
+	if (ret)
+		goto err;
+
+	ret = reset_control_deassert(data->resets);
+	if (ret)
+		goto err;
+
+	cdns_starfive_set_phy(data);
+err:
+	return ret;
+}
+
+static int cdns_starfive_suspend(struct device *dev)
+{
+	struct cdns_starfive *data = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(data->num_clks, data->clks);
+	reset_control_assert(data->resets);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops cdns_starfive_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
+};
+
+static const struct of_device_id cdns_starfive_of_match[] = {
+	{ .compatible = "starfive,jh7110-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
+
+static struct platform_driver cdns_starfive_driver = {
+	.probe		= cdns_starfive_probe,
+	.remove		= cdns_starfive_remove,
+	.driver		= {
+		.name	= "cdns3-starfive",
+		.of_match_table	= cdns_starfive_of_match,
+		.pm	= &cdns_starfive_pm_ops,
+	},
+};
+
+module_platform_driver(cdns_starfive_driver);
+
+MODULE_ALIAS("platform:cdns3-starfive");
+MODULE_AUTHOR("YanHong Wang <yanhong.wang@starfivetech.com>");
+MODULE_AUTHOR("Mason Huo <mason.huo@starfivetech.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");