diff mbox series

[04/11] ARM: sa1100: make cpufreq driver build standalone

Message ID	20221021155000.4108406-5-arnd@kernel.org
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Arnd Bergmann <arnd@kernel.org> To: linux-arm-kernel@lists.infradead.org, Russell King <linux@armlinux.org.uk>, Linus Walleij <linus.walleij@linaro.org>, Lubomir Rintel <lkundrak@v3.sk>, "Rafael J. Wysocki" <rafael@kernel.org>, Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, linux-pm@vger.kernel.org Subject: [PATCH 04/11] ARM: sa1100: make cpufreq driver build standalone Date: Fri, 21 Oct 2022 17:49:34 +0200 Message-Id: <20221021155000.4108406-5-arnd@kernel.org> In-Reply-To: <20221021155000.4108406-1-arnd@kernel.org> References: <20221021155000.4108406-1-arnd@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	ARM: sa1100, mmp: drop unused board files \| [00/11] ARM: sa1100, mmp: drop unused board files [01/11] ARM: sa1100: un-deprecate jornada720 [02/11] ARM: sa1100: remove unused board files [03/11] ARM: sa1100: remove irda references [04/11] ARM: sa1100: make cpufreq driver build standalone [05/11] cpufreq: remove sa1100 driver [06/11] mtd: remove lart flash driver [07/11] ARM: mmp: select specific CPU implementation [08/11] ARM: mmp: remove all board files [09/11] ARM: mmp: remove custom sram code [10/11] ARM: mmp: remove device definitions [11/11] ARM: mmp: remove old PM support

Commit Message

Arnd Bergmann Oct. 21, 2022, 3:49 p.m. UTC

  From: Arnd Bergmann <arnd@arndb.de>

Commit 59a2e613d07f ("cpufreq: sa11x0: move cpufreq driver
to drivers/cpufreq") added an unnecessary reference to
mach/generic.h. Just remove it again after moving the code
into the corresponding driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-sa1100/generic.c              | 32 ---------------------
 arch/arm/mach-sa1100/generic.h              |  4 ---
 arch/arm/mach-sa1100/include/mach/generic.h |  1 -
 drivers/cpufreq/sa1110-cpufreq.c            | 32 +++++++++++++++++++++
 4 files changed, 32 insertions(+), 37 deletions(-)
 delete mode 100644 arch/arm/mach-sa1100/include/mach/generic.h

Comments

Viresh Kumar Oct. 25, 2022, 5:07 a.m. UTC | #1

On 21-10-22, 17:49, Arnd Bergmann wrote:
> --- a/drivers/cpufreq/sa1110-cpufreq.c
> +++ b/drivers/cpufreq/sa1110-cpufreq.c
> @@ -29,6 +29,38 @@
>  
>  #undef DEBUG
>  
> +#define NR_FREQS	16
> +
> +/*
> + * This table is setup for a 3.6864MHz Crystal.
> + */
> +static struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
> +	{ .frequency = 59000,	/*  59.0 MHz */},
> +	{ .frequency = 73700,	/*  73.7 MHz */},
> +	{ .frequency = 88500,	/*  88.5 MHz */},
> +	{ .frequency = 103200,	/* 103.2 MHz */},
> +	{ .frequency = 118000,	/* 118.0 MHz */},
> +	{ .frequency = 132700,	/* 132.7 MHz */},
> +	{ .frequency = 147500,	/* 147.5 MHz */},
> +	{ .frequency = 162200,	/* 162.2 MHz */},
> +	{ .frequency = 176900,	/* 176.9 MHz */},
> +	{ .frequency = 191700,	/* 191.7 MHz */},
> +	{ .frequency = 206400,	/* 206.4 MHz */},
> +	{ .frequency = 221200,	/* 221.2 MHz */},
> +	{ .frequency = 235900,	/* 235.9 MHz */},
> +	{ .frequency = 250700,	/* 250.7 MHz */},
> +	{ .frequency = 265400,	/* 265.4 MHz */},
> +	{ .frequency = 280200,	/* 280.2 MHz */},
> +	{ .frequency = CPUFREQ_TABLE_END, },
> +};
> +
> +static unsigned int sa11x0_getspeed(unsigned int cpu)
> +{
> +	if (cpu)
> +		return 0;
> +	return sa11x0_freq_table[PPCR & 0xf].frequency;
> +}
> +
>  struct sdram_params {
>  	const char name[20];
>  	u_char  rows;		/* bits				 */

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Russell King (Oracle) Oct. 25, 2022, 8:28 a.m. UTC | #2

On Fri, Oct 21, 2022 at 05:49:34PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> Commit 59a2e613d07f ("cpufreq: sa11x0: move cpufreq driver
> to drivers/cpufreq") added an unnecessary reference to
> mach/generic.h. Just remove it again after moving the code
> into the corresponding driver.

So how does arch/arm/mach-sa1100/clock.c get the MPLL rate with this
change?

Arnd Bergmann Oct. 25, 2022, 10:14 a.m. UTC | #3

On Tue, Oct 25, 2022, at 10:28, Russell King (Oracle) wrote:
> On Fri, Oct 21, 2022 at 05:49:34PM +0200, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>> 
>> Commit 59a2e613d07f ("cpufreq: sa11x0: move cpufreq driver
>> to drivers/cpufreq") added an unnecessary reference to
>> mach/generic.h. Just remove it again after moving the code
>> into the corresponding driver.
>
> So how does arch/arm/mach-sa1100/clock.c get the MPLL rate with this
> change?

You are right, that's broken. It works for the defconfigs that
enable the cpufreq driver, but it seems I need to improve my
randconfig build testing to make sure I find problems like this
sooner.

I don't think anything depends on this patch, so I've dropped
it from my series now.

Thanks,

    Arnd

Russell King (Oracle) Oct. 25, 2022, 12:12 p.m. UTC | #4

On Tue, Oct 25, 2022 at 12:14:19PM +0200, Arnd Bergmann wrote:
> On Tue, Oct 25, 2022, at 10:28, Russell King (Oracle) wrote:
> > On Fri, Oct 21, 2022 at 05:49:34PM +0200, Arnd Bergmann wrote:
> >> From: Arnd Bergmann <arnd@arndb.de>
> >> 
> >> Commit 59a2e613d07f ("cpufreq: sa11x0: move cpufreq driver
> >> to drivers/cpufreq") added an unnecessary reference to
> >> mach/generic.h. Just remove it again after moving the code
> >> into the corresponding driver.
> >
> > So how does arch/arm/mach-sa1100/clock.c get the MPLL rate with this
> > change?
> 
> You are right, that's broken. It works for the defconfigs that
> enable the cpufreq driver,

Umm. How? I think your testing must be seriously flawed!

You add sa11x0_getspeed() to the sa1110 cpufreq driver as a static
function, which means it won't be visible to clock.c - and clock.c
is always built, and always references sa11x0_getspeed()... so you
should be getting an unconditional build failure at link time and
a compiler warning that sa11x0_getspeed() is not declared.

Are you not seeing that?

diff mbox series

Patch

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 6c21f214cd60..424f08eece20 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -39,38 +39,6 @@ 
 #include "generic.h"
 #include <clocksource/pxa.h>
 
-#define NR_FREQS	16
-
-/*
- * This table is setup for a 3.6864MHz Crystal.
- */
-struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
-	{ .frequency = 59000,	/*  59.0 MHz */},
-	{ .frequency = 73700,	/*  73.7 MHz */},
-	{ .frequency = 88500,	/*  88.5 MHz */},
-	{ .frequency = 103200,	/* 103.2 MHz */},
-	{ .frequency = 118000,	/* 118.0 MHz */},
-	{ .frequency = 132700,	/* 132.7 MHz */},
-	{ .frequency = 147500,	/* 147.5 MHz */},
-	{ .frequency = 162200,	/* 162.2 MHz */},
-	{ .frequency = 176900,	/* 176.9 MHz */},
-	{ .frequency = 191700,	/* 191.7 MHz */},
-	{ .frequency = 206400,	/* 206.4 MHz */},
-	{ .frequency = 221200,	/* 221.2 MHz */},
-	{ .frequency = 235900,	/* 235.9 MHz */},
-	{ .frequency = 250700,	/* 250.7 MHz */},
-	{ .frequency = 265400,	/* 265.4 MHz */},
-	{ .frequency = 280200,	/* 280.2 MHz */},
-	{ .frequency = CPUFREQ_TABLE_END, },
-};
-
-unsigned int sa11x0_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-	return sa11x0_freq_table[PPCR & 0xf].frequency;
-}
-
 /*
  * Default power-off for SA1100
  */
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 158a4fd5ca24..cc891c57d306 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -4,7 +4,6 @@ 
  *
  * Author: Nicolas Pitre
  */
-#include <linux/cpufreq.h>
 #include <linux/reboot.h>
 
 extern void sa1100_timer_init(void);
@@ -21,9 +20,6 @@  extern void sa11x0_init_late(void);
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
-extern struct cpufreq_frequency_table sa11x0_freq_table[];
-extern unsigned int sa11x0_getspeed(unsigned int cpu);
-
 struct flash_platform_data;
 struct resource;
 
diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h
deleted file mode 100644
index 665542e0c9e2..000000000000
--- a/arch/arm/mach-sa1100/include/mach/generic.h
+++ /dev/null
@@ -1 +0,0 @@ 
-#include "../../generic.h"
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index bb7f591a8b05..ce636c1147a6 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -29,6 +29,38 @@ 
 
 #undef DEBUG
 
+#define NR_FREQS	16
+
+/*
+ * This table is setup for a 3.6864MHz Crystal.
+ */
+static struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
+	{ .frequency = 59000,	/*  59.0 MHz */},
+	{ .frequency = 73700,	/*  73.7 MHz */},
+	{ .frequency = 88500,	/*  88.5 MHz */},
+	{ .frequency = 103200,	/* 103.2 MHz */},
+	{ .frequency = 118000,	/* 118.0 MHz */},
+	{ .frequency = 132700,	/* 132.7 MHz */},
+	{ .frequency = 147500,	/* 147.5 MHz */},
+	{ .frequency = 162200,	/* 162.2 MHz */},
+	{ .frequency = 176900,	/* 176.9 MHz */},
+	{ .frequency = 191700,	/* 191.7 MHz */},
+	{ .frequency = 206400,	/* 206.4 MHz */},
+	{ .frequency = 221200,	/* 221.2 MHz */},
+	{ .frequency = 235900,	/* 235.9 MHz */},
+	{ .frequency = 250700,	/* 250.7 MHz */},
+	{ .frequency = 265400,	/* 265.4 MHz */},
+	{ .frequency = 280200,	/* 280.2 MHz */},
+	{ .frequency = CPUFREQ_TABLE_END, },
+};
+
+static unsigned int sa11x0_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return sa11x0_freq_table[PPCR & 0xf].frequency;
+}
+
 struct sdram_params {
 	const char name[20];
 	u_char  rows;		/* bits				 */