[5/5] pwm: jz4740: Use regmap_{set,clear}_bits
Commit Message
Simplify a bit the code by using regmap_set_bits() and
regmap_clear_bits() instead of regmap_update_bits() when possible.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/pwm/pwm-jz4740.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
Comments
On 24/10/22 22:52, Paul Cercueil wrote:
> Simplify a bit the code by using regmap_set_bits() and
> regmap_clear_bits() instead of regmap_update_bits() when possible.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> drivers/pwm/pwm-jz4740.c | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Hello,
On Mon, Oct 24, 2022 at 09:52:13PM +0100, Paul Cercueil wrote:
> Simplify a bit the code by using regmap_set_bits() and
> regmap_clear_bits() instead of regmap_update_bits() when possible.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> drivers/pwm/pwm-jz4740.c | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
> index c0afc0c316a8..22fcdca66081 100644
> --- a/drivers/pwm/pwm-jz4740.c
> +++ b/drivers/pwm/pwm-jz4740.c
> @@ -88,8 +88,7 @@ static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> struct jz4740_pwm_chip *jz = to_jz4740(chip);
>
> /* Enable PWM output */
> - regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
> - TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
> + regmap_set_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
>
> /* Start counter */
> regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
> @@ -129,8 +128,7 @@ static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> * In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
> * counter is stopped, while in TCU1 mode the order does not matter.
> */
> - regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
> - TCU_TCSR_PWM_EN, 0);
> + regmap_clear_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
>
> /* Stop counter */
> regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
> @@ -204,8 +202,8 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
>
> /* Set abrupt shutdown */
> - regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
> - TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
> + regmap_set_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
> + TCU_TCSR_PWM_SD);
Nitpick: the regmap_set_bits call is short enough to be put on a single
line.
Other than that (and even if the line is kept as is):
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Best regards
Uwe
@@ -88,8 +88,7 @@ static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
struct jz4740_pwm_chip *jz = to_jz4740(chip);
/* Enable PWM output */
- regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
- TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
+ regmap_set_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
/* Start counter */
regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
@@ -129,8 +128,7 @@ static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
- regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
- TCU_TCSR_PWM_EN, 0);
+ regmap_clear_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm), TCU_TCSR_PWM_EN);
/* Stop counter */
regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
@@ -204,8 +202,8 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
/* Set abrupt shutdown */
- regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
- TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+ regmap_set_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_SD);
if (state->enabled) {
/*