[RFC,1/4] dt-bindings: clock: rename mt7986-clk.h to mediatek,mt7986-clk.h
Commit Message
Rename dt-bindings header file mt7986-clk.h to mediatek,mt7986-clk.h,
propagate this change also to mt7986a.dtsi which is the only user.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 2 +-
drivers/clk/mediatek/clk-mt7986-infracfg.c | 2 +-
drivers/clk/mediatek/clk-mt7986-topckgen.c | 2 +-
.../dt-bindings/clock/{mt7986-clk.h => mediatek,mt7986-clk.h} | 0
4 files changed, 3 insertions(+), 3 deletions(-)
rename include/dt-bindings/clock/{mt7986-clk.h => mediatek,mt7986-clk.h} (100%)
Comments
On 22/02/2023 19:09, Daniel Golle wrote:
> Rename dt-bindings header file mt7986-clk.h to mediatek,mt7986-clk.h,
> propagate this change also to mt7986a.dtsi which is the only user.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 2 +-
> drivers/clk/mediatek/clk-mt7986-infracfg.c | 2 +-
> drivers/clk/mediatek/clk-mt7986-topckgen.c | 2 +-
> .../dt-bindings/clock/{mt7986-clk.h => mediatek,mt7986-clk.h} | 0
You cannot have bindings and DTS and drivers mixed together. Which
points to fact - you cannot make such change... Also your commit msg
does not justify "why" you are doing it.
Best regards,
Krzysztof
On Thu, Feb 23, 2023 at 11:18:37AM +0100, Krzysztof Kozlowski wrote:
> On 22/02/2023 19:09, Daniel Golle wrote:
> > Rename dt-bindings header file mt7986-clk.h to mediatek,mt7986-clk.h,
> > propagate this change also to mt7986a.dtsi which is the only user.
> >
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 2 +-
> > drivers/clk/mediatek/clk-mt7986-infracfg.c | 2 +-
> > drivers/clk/mediatek/clk-mt7986-topckgen.c | 2 +-
> > .../dt-bindings/clock/{mt7986-clk.h => mediatek,mt7986-clk.h} | 0
>
> You cannot have bindings and DTS and drivers mixed together. Which
> points to fact - you cannot make such change... Also your commit msg
> does not justify "why" you are doing it.
The reason is simply consistency with most other SoCs.
So to make such a change possible, I should do it in three steps, right?
Step 1: dt-bindings: copy mt7986-clk.h to mediatek,mt7986-clk.h
Step 2: changes in drivers
Step 3: dt-bindings: remove mt7986-clk.h
Would this change be acceptable if carried out in 3 commits?
And using the same strategy also the other changes suggested in the
series?
Thank you!
Best regards
Daniel
On 24/02/2023 22:06, Daniel Golle wrote:
> On Thu, Feb 23, 2023 at 11:18:37AM +0100, Krzysztof Kozlowski wrote:
>> On 22/02/2023 19:09, Daniel Golle wrote:
>>> Rename dt-bindings header file mt7986-clk.h to mediatek,mt7986-clk.h,
>>> propagate this change also to mt7986a.dtsi which is the only user.
>>>
>>> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 2 +-
>>> drivers/clk/mediatek/clk-mt7986-infracfg.c | 2 +-
>>> drivers/clk/mediatek/clk-mt7986-topckgen.c | 2 +-
>>> .../dt-bindings/clock/{mt7986-clk.h => mediatek,mt7986-clk.h} | 0
>>
>> You cannot have bindings and DTS and drivers mixed together. Which
>> points to fact - you cannot make such change... Also your commit msg
>> does not justify "why" you are doing it.
>
> The reason is simply consistency with most other SoCs.
>
> So to make such a change possible, I should do it in three steps, right?
> Step 1: dt-bindings: copy mt7986-clk.h to mediatek,mt7986-clk.h
> Step 2: changes in drivers
> Step 3: dt-bindings: remove mt7986-clk.h
>
> Would this change be acceptable if carried out in 3 commits?
For new code - it would have to be in three commits. For existing code,
how you are going to achieve it with keeping full bisectability?
Remember that each commits goes to different branch and/or tree! It's
probably doable within two Linux releases with some header wrappers...
but is it worth the effort just for "consistency"?
> And using the same strategy also the other changes suggested in the
> series?
All of them have the same bisectability problems...
Best regards,
Krzysztof
@@ -6,7 +6,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/clock/mediatek,mt7986-clk.h>
#include <dt-bindings/reset/mt7986-resets.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/thermal/thermal.h>
@@ -14,7 +14,7 @@
#include "clk-gate.h"
#include "clk-mux.h"
-#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/clock/mediatek,mt7986-clk.h>
#include <linux/clk.h>
static DEFINE_SPINLOCK(mt7986_clk_lock);
@@ -14,7 +14,7 @@
#include "clk-gate.h"
#include "clk-mux.h"
-#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/clock/mediatek,mt7986-clk.h>
#include <linux/clk.h>
static DEFINE_SPINLOCK(mt7986_clk_lock);
similarity index 100%
rename from include/dt-bindings/clock/mt7986-clk.h
rename to include/dt-bindings/clock/mediatek,mt7986-clk.h