[02/10] clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors

Message ID 20221024102307.33722-3-angelogioacchino.delregno@collabora.com
State New
Headers
Series MTK: Undesired set_rate on main PLLs and GPU DVFS |

Commit Message

AngeloGioacchino Del Regno Oct. 24, 2022, 10:22 a.m. UTC
  The mainpll and univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have "fixed factor" clocks, used
by MUX clocks to provide different rates based on PLL output dividers.

Though, there's one fundamental issue that must be resolved somehow:

When performing GPU DVFS, we get a rate request that will try to change
the frequency of MAINPLL due to the CLK_TOP_MFG mux having clk26m,
mfgpll (the GPU dedicated PLL), mainpll_d3, mainpll_d5 (fixed factor
dividers) as possible parents.

In order to solve that, there are two ways:
 1. Add new "fake" mainpll_d3_fixed, mainpll_d5_fixed clocks, clones
    of mainpll_d3, mainpll_d5 clocks, for the only purpose of not
    declaring CLK_SET_RATE_PARENT; or
 2. Simply drop said flag from the original dividers.

After some careful validation, I cannot see anything calling a rate
change request during runtime for MAINPLL, nor for UNIVPLL (which would,
again, mean that we're reclocking lots of peripherals at once!), so it
is safe *and sane* to simply remove the CLK_SET_RATE_PARENT flag to all
of the main/univpll fixed factor divider clocks.

Besides, if for any (doubtful) reason main/univpll rate change will be
required in the future, it's still possible to call that on the PLL main
clocks, so we're still covered anyway.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/clk/mediatek/clk-mt8186-topckgen.c | 62 +++++++++++-----------
 1 file changed, 31 insertions(+), 31 deletions(-)
  

Comments

Chen-Yu Tsai Oct. 24, 2022, 9:58 p.m. UTC | #1
On Mon, Oct 24, 2022 at 3:23 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> The mainpll and univpll clocks are used as clock sources for multiple
> peripherals of different kind, some of which are critical (like AXIs);
> a rate change on any of these two will produce a rate change on many
> devices and that's likely to produce system instability if not done
> correctly: this is the reason why we have "fixed factor" clocks, used
> by MUX clocks to provide different rates based on PLL output dividers.
>
> Though, there's one fundamental issue that must be resolved somehow:
>
> When performing GPU DVFS, we get a rate request that will try to change
> the frequency of MAINPLL due to the CLK_TOP_MFG mux having clk26m,
> mfgpll (the GPU dedicated PLL), mainpll_d3, mainpll_d5 (fixed factor
> dividers) as possible parents.
>
> In order to solve that, there are two ways:
>  1. Add new "fake" mainpll_d3_fixed, mainpll_d5_fixed clocks, clones
>     of mainpll_d3, mainpll_d5 clocks, for the only purpose of not
>     declaring CLK_SET_RATE_PARENT; or
>  2. Simply drop said flag from the original dividers.
>
> After some careful validation, I cannot see anything calling a rate
> change request during runtime for MAINPLL, nor for UNIVPLL (which would,
> again, mean that we're reclocking lots of peripherals at once!), so it
> is safe *and sane* to simply remove the CLK_SET_RATE_PARENT flag to all
> of the main/univpll fixed factor divider clocks.
>
> Besides, if for any (doubtful) reason main/univpll rate change will be
> required in the future, it's still possible to call that on the PLL main
> clocks, so we're still covered anyway.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

AFAIK this matches what we do for some other SoC families, so

Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
  

Patch

diff --git a/drivers/clk/mediatek/clk-mt8186-topckgen.c b/drivers/clk/mediatek/clk-mt8186-topckgen.c
index d7f2c4663c85..62b5ff4a5723 100644
--- a/drivers/clk/mediatek/clk-mt8186-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt8186-topckgen.c
@@ -19,37 +19,37 @@  static const struct mtk_fixed_clk top_fixed_clks[] = {
 };
 
 static const struct mtk_fixed_factor top_divs[] = {
-	FACTOR(CLK_TOP_MAINPLL_D2, "mainpll_d2", "mainpll", 1, 2),
-	FACTOR(CLK_TOP_MAINPLL_D2_D2, "mainpll_d2_d2", "mainpll_d2", 1, 2),
-	FACTOR(CLK_TOP_MAINPLL_D2_D4, "mainpll_d2_d4", "mainpll_d2", 1, 4),
-	FACTOR(CLK_TOP_MAINPLL_D2_D16, "mainpll_d2_d16", "mainpll_d2", 1, 16),
-	FACTOR(CLK_TOP_MAINPLL_D3, "mainpll_d3", "mainpll", 1, 3),
-	FACTOR(CLK_TOP_MAINPLL_D3_D2, "mainpll_d3_d2", "mainpll_d3", 1, 2),
-	FACTOR(CLK_TOP_MAINPLL_D3_D4, "mainpll_d3_d4", "mainpll_d3", 1, 4),
-	FACTOR(CLK_TOP_MAINPLL_D5, "mainpll_d5", "mainpll", 1, 5),
-	FACTOR(CLK_TOP_MAINPLL_D5_D2, "mainpll_d5_d2", "mainpll_d5", 1, 2),
-	FACTOR(CLK_TOP_MAINPLL_D5_D4, "mainpll_d5_d4", "mainpll_d5", 1, 4),
-	FACTOR(CLK_TOP_MAINPLL_D7, "mainpll_d7", "mainpll", 1, 7),
-	FACTOR(CLK_TOP_MAINPLL_D7_D2, "mainpll_d7_d2", "mainpll_d7", 1, 2),
-	FACTOR(CLK_TOP_MAINPLL_D7_D4, "mainpll_d7_d4", "mainpll_d7", 1, 4),
-	FACTOR(CLK_TOP_UNIVPLL, "univpll", "univ2pll", 1, 2),
-	FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2),
-	FACTOR(CLK_TOP_UNIVPLL_D2_D2, "univpll_d2_d2", "univpll_d2", 1, 2),
-	FACTOR(CLK_TOP_UNIVPLL_D2_D4, "univpll_d2_d4", "univpll_d2", 1, 4),
-	FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3),
-	FACTOR(CLK_TOP_UNIVPLL_D3_D2, "univpll_d3_d2", "univpll_d3", 1, 2),
-	FACTOR(CLK_TOP_UNIVPLL_D3_D4, "univpll_d3_d4", "univpll_d3", 1, 4),
-	FACTOR(CLK_TOP_UNIVPLL_D3_D8, "univpll_d3_d8", "univpll_d3", 1, 8),
-	FACTOR(CLK_TOP_UNIVPLL_D3_D32, "univpll_d3_d32", "univpll_d3", 1, 32),
-	FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
-	FACTOR(CLK_TOP_UNIVPLL_D5_D2, "univpll_d5_d2", "univpll_d5", 1, 2),
-	FACTOR(CLK_TOP_UNIVPLL_D5_D4, "univpll_d5_d4", "univpll_d5", 1, 4),
-	FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
-	FACTOR(CLK_TOP_UNIVPLL_192M, "univpll_192m", "univ2pll", 1, 13),
-	FACTOR(CLK_TOP_UNIVPLL_192M_D4, "univpll_192m_d4", "univpll_192m", 1, 4),
-	FACTOR(CLK_TOP_UNIVPLL_192M_D8, "univpll_192m_d8", "univpll_192m", 1, 8),
-	FACTOR(CLK_TOP_UNIVPLL_192M_D16, "univpll_192m_d16", "univpll_192m", 1, 16),
-	FACTOR(CLK_TOP_UNIVPLL_192M_D32, "univpll_192m_d32", "univpll_192m", 1, 32),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D2, "mainpll_d2", "mainpll", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D2_D2, "mainpll_d2_d2", "mainpll_d2", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D2_D4, "mainpll_d2_d4", "mainpll_d2", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D2_D16, "mainpll_d2_d16", "mainpll_d2", 1, 16, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D3, "mainpll_d3", "mainpll", 1, 3, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D3_D2, "mainpll_d3_d2", "mainpll_d3", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D3_D4, "mainpll_d3_d4", "mainpll_d3", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D5, "mainpll_d5", "mainpll", 1, 5, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D5_D2, "mainpll_d5_d2", "mainpll_d5", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D5_D4, "mainpll_d5_d4", "mainpll_d5", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D7, "mainpll_d7", "mainpll", 1, 7, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D7_D2, "mainpll_d7_d2", "mainpll_d7", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_MAINPLL_D7_D4, "mainpll_d7_d4", "mainpll_d7", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL, "univpll", "univ2pll", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D2_D2, "univpll_d2_d2", "univpll_d2", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D2_D4, "univpll_d2_d4", "univpll_d2", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D3_D2, "univpll_d3_d2", "univpll_d3", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D3_D4, "univpll_d3_d4", "univpll_d3", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D3_D8, "univpll_d3_d8", "univpll_d3", 1, 8, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D3_D32, "univpll_d3_d32", "univpll_d3", 1, 32, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D5_D2, "univpll_d5_d2", "univpll_d5", 1, 2, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D5_D4, "univpll_d5_d4", "univpll_d5", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_192M, "univpll_192m", "univ2pll", 1, 13, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_192M_D4, "univpll_192m_d4", "univpll_192m", 1, 4, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_192M_D8, "univpll_192m_d8", "univpll_192m", 1, 8, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_192M_D16, "univpll_192m_d16", "univpll_192m", 1, 16, 0),
+	FACTOR_FLAGS(CLK_TOP_UNIVPLL_192M_D32, "univpll_192m_d32", "univpll_192m", 1, 32, 0),
 	FACTOR(CLK_TOP_APLL1_D2, "apll1_d2", "apll1", 1, 2),
 	FACTOR(CLK_TOP_APLL1_D4, "apll1_d4", "apll1", 1, 4),
 	FACTOR(CLK_TOP_APLL1_D8, "apll1_d8", "apll1", 1, 8),