[v3,3/3] arm64: dts: qcom: sdm845-oneplus: add alert-slider
Commit Message
The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
Android maps the states to "silent", "vibrate" and "ring". Expose them as
ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct
ones.
Co-developed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
---
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 43 ++++++++++++++++++-
1 file changed, 41 insertions(+), 2 deletions(-)
Comments
On 20.02.2023 01:13, Gergo Koteles wrote:
> The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
> Android maps the states to "silent", "vibrate" and "ring". Expose them as
> ABS_SND_PROFILE events.
> The previous GPIO numbers were wrong. Update them to the correct
> ones.
>
> Co-developed-by: Caleb Connolly <caleb@connolly.tech>
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> Signed-off-by: Gergo Koteles <soyer@irl.hu>
> ---
> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 43 ++++++++++++++++++-
> 1 file changed, 41 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> index 64638ea94db7..ff982dd853a9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -52,6 +52,45 @@ key-vol-up {
> };
> };
>
> + alert-slider {
This is out of order, alphabetically.
> + compatible = "gpio-keys";
> + label = "Alert slider";
> +
> + pinctrl-0 = <&alert_slider_default>;
> + pinctrl-names = "default";
> +
> + switch-top {
> + label = "Silent";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_SILENT>;
> + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> + debounce-interval = <50>;
Is there a reason it can't be the default 5ms, since it should
more or less be a simple input ping to the userspace?
Other than that:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> + linux,can-disable;
> + };
> +
> + switch-middle {
> + label = "Vibrate";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_VIBRATE>;
> + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
> + debounce-interval = <50>;
> + linux,can-disable;
> +
> + };
> +
> + switch-bottom {
> + label = "Ring";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_RING>;
> + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> + debounce-interval = <50>;
> + linux,can-disable;
> + };
> + };
> +
> reserved-memory {
> /*
> * The rmtfs_mem needs to be guarded due to "XPU limitations"
> @@ -753,8 +792,8 @@ &usb_1_hsphy {
> &tlmm {
> gpio-reserved-ranges = <0 4>, <81 4>;
>
> - tri_state_key_default: tri-state-key-default-state {
> - pins = "gpio40", "gpio42", "gpio26";
> + alert_slider_default: alert-slider-default-state {
> + pins = "gpio126", "gpio52", "gpio24";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
Hi Konrad,
On 2023. 02. 20. 11:17, Konrad Dybcio wrote:
>
>
> On 20.02.2023 01:13, Gergo Koteles wrote:
>> The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
>> Android maps the states to "silent", "vibrate" and "ring". Expose them as
>> ABS_SND_PROFILE events.
>> The previous GPIO numbers were wrong. Update them to the correct
>> ones.
>>
>> Co-developed-by: Caleb Connolly <caleb@connolly.tech>
>> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
>> Signed-off-by: Gergo Koteles <soyer@irl.hu>
>> ---
>> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 43 ++++++++++++++++++-
>> 1 file changed, 41 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>> index 64638ea94db7..ff982dd853a9 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
>> @@ -52,6 +52,45 @@ key-vol-up {
>> };
>> };
>>
>> + alert-slider {
> This is out of order, alphabetically.
>
>> + compatible = "gpio-keys";
>> + label = "Alert slider";
>> +
>> + pinctrl-0 = <&alert_slider_default>;
>> + pinctrl-names = "default";
>> +
>> + switch-top {
>> + label = "Silent";
>> + linux,input-type = <EV_ABS>;
>> + linux,code = <ABS_SND_PROFILE>;
>> + linux,input-value = <SND_PROFILE_SILENT>;
>> + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
>> + debounce-interval = <50>;
> Is there a reason it can't be the default 5ms, since it should
> more or less be a simple input ping to the userspace?
>
Yes, it's a simple input ping to the userspace.
It works with the default 5ms also.
Thanks,
Gergo
> Other than that:
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> Konrad
>> + linux,can-disable;
>> + };
>> +
>> + switch-middle {
>> + label = "Vibrate";
>> + linux,input-type = <EV_ABS>;
>> + linux,code = <ABS_SND_PROFILE>;
>> + linux,input-value = <SND_PROFILE_VIBRATE>;
>> + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
>> + debounce-interval = <50>;
>> + linux,can-disable;
>> +
>> + };
>> +
>> + switch-bottom {
>> + label = "Ring";
>> + linux,input-type = <EV_ABS>;
>> + linux,code = <ABS_SND_PROFILE>;
>> + linux,input-value = <SND_PROFILE_RING>;
>> + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
>> + debounce-interval = <50>;
>> + linux,can-disable;
>> + };
>> + };
>> +
>> reserved-memory {
>> /*
>> * The rmtfs_mem needs to be guarded due to "XPU limitations"
>> @@ -753,8 +792,8 @@ &usb_1_hsphy {
>> &tlmm {
>> gpio-reserved-ranges = <0 4>, <81 4>;
>>
>> - tri_state_key_default: tri-state-key-default-state {
>> - pins = "gpio40", "gpio42", "gpio26";
>> + alert_slider_default: alert-slider-default-state {
>> + pins = "gpio126", "gpio52", "gpio24";
>> function = "gpio";
>> drive-strength = <2>;
>> bias-disable;
@@ -52,6 +52,45 @@ key-vol-up {
};
};
+ alert-slider {
+ compatible = "gpio-keys";
+ label = "Alert slider";
+
+ pinctrl-0 = <&alert_slider_default>;
+ pinctrl-names = "default";
+
+ switch-top {
+ label = "Silent";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_SILENT>;
+ gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
+ linux,can-disable;
+ };
+
+ switch-middle {
+ label = "Vibrate";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_VIBRATE>;
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
+ linux,can-disable;
+
+ };
+
+ switch-bottom {
+ label = "Ring";
+ linux,input-type = <EV_ABS>;
+ linux,code = <ABS_SND_PROFILE>;
+ linux,input-value = <SND_PROFILE_RING>;
+ gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+ debounce-interval = <50>;
+ linux,can-disable;
+ };
+ };
+
reserved-memory {
/*
* The rmtfs_mem needs to be guarded due to "XPU limitations"
@@ -753,8 +792,8 @@ &usb_1_hsphy {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- tri_state_key_default: tri-state-key-default-state {
- pins = "gpio40", "gpio42", "gpio26";
+ alert_slider_default: alert-slider-default-state {
+ pins = "gpio126", "gpio52", "gpio24";
function = "gpio";
drive-strength = <2>;
bias-disable;