diff mbox series

[RESEND,03/12] arm64: dts: qcom: sm6350: Supply clock from cpufreq node to CPUs

Message ID 20230215070400.5901-4-manivannan.sadhasivam@linaro.org
State New
Headers
Series arm64: dts: qcom: Supply clock from cpufreq node to CPUs |

Commit Message

Manivannan Sadhasivam Feb. 15, 2023, 7:03 a.m. UTC 
  Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Konrad Dybcio Feb. 16, 2023, 10:35 a.m. UTC | #1 
On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 1e1d366c92c1..c46bb6dab6a1 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -46,6 +46,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -71,6 +72,7 @@ CPU1: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -92,6 +94,7 @@ CPU2: cpu@200 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x200>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -113,6 +116,7 @@ CPU3: cpu@300 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x300>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -134,6 +138,7 @@ CPU4: cpu@400 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x400>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -155,6 +160,7 @@ CPU5: cpu@500 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x500>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <100>;
> @@ -177,6 +183,7 @@ CPU6: cpu@600 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x600>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1894>;
>  			dynamic-power-coefficient = <703>;
> @@ -198,6 +205,7 @@ CPU7: cpu@700 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo560";
>  			reg = <0x0 0x700>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1894>;
>  			dynamic-power-coefficient = <703>;
> @@ -2002,6 +2010,7 @@ cpufreq_hw: cpufreq@18323000 {
>  			clock-names = "xo", "alternate";
>  
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  	};
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 1e1d366c92c1..c46bb6dab6a1 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -46,6 +46,7 @@  CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -71,6 +72,7 @@  CPU1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -92,6 +94,7 @@  CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -113,6 +116,7 @@  CPU3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -134,6 +138,7 @@  CPU4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -155,6 +160,7 @@  CPU5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
@@ -177,6 +183,7 @@  CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
@@ -198,6 +205,7 @@  CPU7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo560";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1894>;
 			dynamic-power-coefficient = <703>;
@@ -2002,6 +2010,7 @@  cpufreq_hw: cpufreq@18323000 {
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 	};