[03/21] ARM: s3c: remove most s3c64xx board support
Commit Message
From: Arnd Bergmann <arnd@arndb.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 206 -------
arch/arm/mach-s3c/Makefile.s3c64xx | 13 -
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -----
arch/arm/mach-s3c/mach-anw6410.c | 230 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---------
arch/arm/mach-s3c/mach-mini6410.c | 365 -----------
arch/arm/mach-s3c/mach-ncp.c | 100 ---
arch/arm/mach-s3c/mach-real6410.c | 333 ----------
arch/arm/mach-s3c/mach-smartq.c | 424 -------------
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 -----
arch/arm/mach-s3c/mach-smartq7.c | 170 ------
arch/arm/mach-s3c/mach-smdk6400.c | 90 ---
arch/arm/mach-s3c/mach-smdk6410.c | 706 ----------------------
14 files changed, 3226 deletions(-)
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
Comments
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> All traditional board files except for MACH_WLF_CRAGG_6410 were
> marked as unused, so remove them now.
>
> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
> Cc: Peter Korsgaard <jacmet@sunsite.dk>
> Cc: Darius Augulis <augulis.darius@gmail.com>
> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
-
# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644