[v2,1/3] arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
Commit Message
Alpha-sort the nodes, move the default line in the LED node to where it's
normally found, and remove excess spacing. No functional changes.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 32 ++++++++-----------
1 file changed, 14 insertions(+), 18 deletions(-)
Comments
On Fri, Feb 10, 2023 at 6:07 PM Christian Hewitt
<christianshewitt@gmail.com> wrote:
>
> Alpha-sort the nodes, move the default line in the LED node to where it's
> normally found, and remove excess spacing. No functional changes.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
@@ -6,21 +6,22 @@
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+
/ {
compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
model = "Videostrong KII Pro";
leds {
compatible = "gpio-leds";
+
status {
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
- default-state = "off";
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
+ default-state = "off";
};
};
@@ -34,24 +35,8 @@ button-reset {
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
};
};
-
-};
-
-
-
-&uart_A {
- status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
-
- bluetooth {
- compatible = "brcm,bcm4335a0";
- };
};
-
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rmii_pins>;
@@ -78,3 +63,14 @@ eth_phy0: ethernet-phy@0 {
&ir {
linux,rc-map-name = "rc-videostrong-kii-pro";
};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4335a0";
+ };
+};