[v2,11/11] net: dsa: mt7530: use external PCS driver

Message ID dcda0a3a1bf89e27e600822df63009b2b10e136a.1675779094.git.daniel@makrotopia.org
State New
Headers
Series net: ethernet: mtk_eth_soc: various enhancements |

Commit Message

Daniel Golle Feb. 7, 2023, 2:24 p.m. UTC
  Implement regmap access wrappers, for now only to be used by the
pcs-mtk driver.
Make use of external PCS driver and drop the reduntant implementation
in mt7530.c.
As a nice side effect the SGMII registers can now also more easily be
inspected for debugging via /sys/kernel/debug/regmap.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/Kconfig  |   1 +
 drivers/net/dsa/mt7530.c | 277 ++++++++++-----------------------------
 drivers/net/dsa/mt7530.h |  47 +------
 3 files changed, 71 insertions(+), 254 deletions(-)
  

Comments

Russell King (Oracle) Feb. 10, 2023, 10:56 a.m. UTC | #1
On Tue, Feb 07, 2023 at 02:24:17PM +0000, Daniel Golle wrote:
> @@ -2728,11 +2612,11 @@ mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
>  
>  	switch (interface) {
>  	case PHY_INTERFACE_MODE_TRGMII:
> +		return &priv->pcs[port].pcs;
>  	case PHY_INTERFACE_MODE_SGMII:
>  	case PHY_INTERFACE_MODE_1000BASEX:
>  	case PHY_INTERFACE_MODE_2500BASEX:
> -		return &priv->pcs[port].pcs;
> -
> +		return priv->ports[port].sgmii_pcs;

My only concern here is that we also use the PCS when in TRGMII mode in
this driver, but the mtk pcs code from mtk_eth_soc doesn't handle
TRGMII (and getting the link timer will fail for this mode, causing
the pcs_config() method to fail.)

Thus, this driver will stop working in TRGMII mode.
  
Daniel Golle Feb. 10, 2023, 12:52 p.m. UTC | #2
On Fri, Feb 10, 2023 at 10:56:57AM +0000, Russell King (Oracle) wrote:
> On Tue, Feb 07, 2023 at 02:24:17PM +0000, Daniel Golle wrote:
> > @@ -2728,11 +2612,11 @@ mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
> >  
> >  	switch (interface) {
> >  	case PHY_INTERFACE_MODE_TRGMII:
> > +		return &priv->pcs[port].pcs;
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

> >  	case PHY_INTERFACE_MODE_SGMII:
> >  	case PHY_INTERFACE_MODE_1000BASEX:
> >  	case PHY_INTERFACE_MODE_2500BASEX:
> > -		return &priv->pcs[port].pcs;
> > -
> > +		return priv->ports[port].sgmii_pcs;
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> My only concern here is that we also use the PCS when in TRGMII mode in
> this driver, but the mtk pcs code from mtk_eth_soc doesn't handle
> TRGMII (and getting the link timer will fail for this mode, causing
> the pcs_config() method to fail.)
> 
> Thus, this driver will stop working in TRGMII mode.

But in TRGMII mode we return &priv->pcs[port].pcs which is not the PCS
code from mtk_eth_soc now moved to the new pcs-mtk-lynxi driver, but
rather the old existing codepath from mt7530.c.

The new PCS driver only replaces mt7531_sgmii_pcs_* functions, which
were all nearly identical with what is now in pcs-mtk-lynxi.c.

Or do I miss something here?
  
Daniel Golle Feb. 10, 2023, 10:17 p.m. UTC | #3
On Fri, Feb 10, 2023 at 10:56:57AM +0000, Russell King (Oracle) wrote:
> On Tue, Feb 07, 2023 at 02:24:17PM +0000, Daniel Golle wrote:
> > @@ -2728,11 +2612,11 @@ mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
> >  
> >  	switch (interface) {
> >  	case PHY_INTERFACE_MODE_TRGMII:
> > +		return &priv->pcs[port].pcs;
> >  	case PHY_INTERFACE_MODE_SGMII:
> >  	case PHY_INTERFACE_MODE_1000BASEX:
> >  	case PHY_INTERFACE_MODE_2500BASEX:
> > -		return &priv->pcs[port].pcs;
> > -
> > +		return priv->ports[port].sgmii_pcs;
> 
> My only concern here is that we also use the PCS when in TRGMII mode in
> this driver, but the mtk pcs code from mtk_eth_soc doesn't handle
> TRGMII (and getting the link timer will fail for this mode, causing
> the pcs_config() method to fail.)
> 
> Thus, this driver will stop working in TRGMII mode.

I've just built and tested this on MT7623 BPi-R2 board with MT7530
connnected to SoC via TRGMII and observed that it all works fine.

However, on this platform we could safe some bytes by still allowing
mt7530.c to be built without pcs-mtk-lynxi which isn't used on MT7623
by either the ethernet or the switch driver.

To me this is not a priority, and doing that would involve adding some
ifdef'ery which isn't really nice. However, if anyone has a strong
opinion in favor of allowing mt7530.c (or even mtk_eth_soc) to be built
without pcs-mtk-lynxi, let me know and I will make the necessary
changes.
  

Patch

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index f6f3b43dfb06..6b45fa8b6907 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -38,6 +38,7 @@  config NET_DSA_MT7530
 	tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
 	select NET_DSA_TAG_MTK
 	select MEDIATEK_GE_PHY
+	select PCS_MTK_LYNXI
 	help
 	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
 	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 616b21c90d05..af4a7168107a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -14,6 +14,7 @@ 
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/of_platform.h>
+#include <linux/pcs/pcs-mtk-lynxi.h>
 #include <linux/phylink.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -2555,128 +2556,11 @@  static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
 	return 0;
 }
 
-static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
-			       phy_interface_t interface, int speed, int duplex)
-{
-	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
-	int port = pcs_to_mt753x_pcs(pcs)->port;
-	unsigned int val;
-
-	/* For adjusting speed and duplex of SGMII force mode. */
-	if (interface != PHY_INTERFACE_MODE_SGMII ||
-	    phylink_autoneg_inband(mode))
-		return;
-
-	/* SGMII force mode setting */
-	val = mt7530_read(priv, MT7531_SGMII_MODE(port));
-	val &= ~MT7531_SGMII_IF_MODE_MASK;
-
-	switch (speed) {
-	case SPEED_10:
-		val |= MT7531_SGMII_FORCE_SPEED_10;
-		break;
-	case SPEED_100:
-		val |= MT7531_SGMII_FORCE_SPEED_100;
-		break;
-	case SPEED_1000:
-		val |= MT7531_SGMII_FORCE_SPEED_1000;
-		break;
-	}
-
-	/* MT7531 SGMII 1G force mode can only work in full duplex mode,
-	 * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
-	 *
-	 * The speed check is unnecessary as the MAC capabilities apply
-	 * this restriction. --rmk
-	 */
-	if ((speed == SPEED_10 || speed == SPEED_100) &&
-	    duplex != DUPLEX_FULL)
-		val |= MT7531_SGMII_FORCE_HALF_DUPLEX;
-
-	mt7530_write(priv, MT7531_SGMII_MODE(port), val);
-}
-
 static bool mt753x_is_mac_port(u32 port)
 {
 	return (port == 5 || port == 6);
 }
 
-static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port,
-					 phy_interface_t interface)
-{
-	u32 val;
-
-	if (!mt753x_is_mac_port(port))
-		return -EINVAL;
-
-	mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
-		   MT7531_SGMII_PHYA_PWD);
-
-	val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
-	val &= ~MT7531_RG_TPHY_SPEED_MASK;
-	/* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B
-	 * encoding.
-	 */
-	val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ?
-		MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G;
-	mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
-
-	mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
-
-	/* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex
-	 * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
-	 */
-	mt7530_rmw(priv, MT7531_SGMII_MODE(port),
-		   MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS,
-		   MT7531_SGMII_FORCE_SPEED_1000);
-
-	mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
-
-	return 0;
-}
-
-static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
-				      phy_interface_t interface)
-{
-	if (!mt753x_is_mac_port(port))
-		return -EINVAL;
-
-	mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
-		   MT7531_SGMII_PHYA_PWD);
-
-	mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
-		   MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G);
-
-	mt7530_set(priv, MT7531_SGMII_MODE(port),
-		   MT7531_SGMII_REMOTE_FAULT_DIS |
-		   MT7531_SGMII_SPEED_DUPLEX_AN);
-
-	mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port),
-		   MT7531_SGMII_TX_CONFIG_MASK, 1);
-
-	mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
-
-	mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART);
-
-	mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
-
-	return 0;
-}
-
-static void mt7531_pcs_an_restart(struct phylink_pcs *pcs)
-{
-	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
-	int port = pcs_to_mt753x_pcs(pcs)->port;
-	u32 val;
-
-	/* Only restart AN when AN is enabled */
-	val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-	if (val & MT7531_SGMII_AN_ENABLE) {
-		val |= MT7531_SGMII_AN_RESTART;
-		mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
-	}
-}
-
 static int
 mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		  phy_interface_t interface)
@@ -2699,11 +2583,11 @@  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		phydev = dp->slave->phydev;
 		return mt7531_rgmii_setup(priv, port, interface, phydev);
 	case PHY_INTERFACE_MODE_SGMII:
-		return mt7531_sgmii_setup_mode_an(priv, port, interface);
 	case PHY_INTERFACE_MODE_NA:
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
-		return mt7531_sgmii_setup_mode_force(priv, port, interface);
+		/* handled in SGMII PCS driver */
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -2728,11 +2612,11 @@  mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
 
 	switch (interface) {
 	case PHY_INTERFACE_MODE_TRGMII:
+		return &priv->pcs[port].pcs;
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
-		return &priv->pcs[port].pcs;
-
+		return priv->ports[port].sgmii_pcs;
 	default:
 		return NULL;
 	}
@@ -2970,86 +2854,6 @@  static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
 		state->pause |= MLO_PAUSE_TX;
 }
 
-static int
-mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port,
-			      struct phylink_link_state *state)
-{
-	u32 status, val;
-	u16 config_reg;
-
-	status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-	state->link = !!(status & MT7531_SGMII_LINK_STATUS);
-	state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE);
-	if (state->interface == PHY_INTERFACE_MODE_SGMII &&
-	    (status & MT7531_SGMII_AN_ENABLE)) {
-		val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
-		config_reg = val >> 16;
-
-		switch (config_reg & LPA_SGMII_SPD_MASK) {
-		case LPA_SGMII_1000:
-			state->speed = SPEED_1000;
-			break;
-		case LPA_SGMII_100:
-			state->speed = SPEED_100;
-			break;
-		case LPA_SGMII_10:
-			state->speed = SPEED_10;
-			break;
-		default:
-			dev_err(priv->dev, "invalid sgmii PHY speed\n");
-			state->link = false;
-			return -EINVAL;
-		}
-
-		if (config_reg & LPA_SGMII_FULL_DUPLEX)
-			state->duplex = DUPLEX_FULL;
-		else
-			state->duplex = DUPLEX_HALF;
-	}
-
-	return 0;
-}
-
-static void
-mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port,
-				  struct phylink_link_state *state)
-{
-	unsigned int val;
-
-	val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-	state->link = !!(val & MT7531_SGMII_LINK_STATUS);
-	if (!state->link)
-		return;
-
-	state->an_complete = state->link;
-
-	if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
-		state->speed = SPEED_2500;
-	else
-		state->speed = SPEED_1000;
-
-	state->duplex = DUPLEX_FULL;
-	state->pause = MLO_PAUSE_NONE;
-}
-
-static void mt7531_pcs_get_state(struct phylink_pcs *pcs,
-				 struct phylink_link_state *state)
-{
-	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
-	int port = pcs_to_mt753x_pcs(pcs)->port;
-
-	if (state->interface == PHY_INTERFACE_MODE_SGMII) {
-		mt7531_sgmii_pcs_get_state_an(priv, port, state);
-		return;
-	} else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) ||
-		   (state->interface == PHY_INTERFACE_MODE_2500BASEX)) {
-		mt7531_sgmii_pcs_get_state_inband(priv, port, state);
-		return;
-	}
-
-	state->link = false;
-}
-
 static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 			     phy_interface_t interface,
 			     const unsigned long *advertising,
@@ -3069,18 +2873,57 @@  static const struct phylink_pcs_ops mt7530_pcs_ops = {
 	.pcs_an_restart = mt7530_pcs_an_restart,
 };
 
-static const struct phylink_pcs_ops mt7531_pcs_ops = {
-	.pcs_validate = mt753x_pcs_validate,
-	.pcs_get_state = mt7531_pcs_get_state,
-	.pcs_config = mt753x_pcs_config,
-	.pcs_an_restart = mt7531_pcs_an_restart,
-	.pcs_link_up = mt7531_pcs_link_up,
+static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct mt7530_priv *priv = context;
+
+	*val = mt7530_read(priv, reg);
+	return 0;
+};
+
+static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct mt7530_priv *priv = context;
+
+	mt7530_write(priv, reg, val);
+	return 0;
+};
+
+static int mt7530_regmap_update_bits(void *context, unsigned int reg,
+				     unsigned int mask, unsigned int val)
+{
+	struct mt7530_priv *priv = context;
+
+	mt7530_rmw(priv, reg, mask, val);
+	return 0;
+};
+
+static const struct regmap_bus mt7531_regmap_bus = {
+	.reg_write = mt7530_regmap_write,
+	.reg_read = mt7530_regmap_read,
+	.reg_update_bits = mt7530_regmap_update_bits,
+};
+
+#define MT7531_PCS_REGMAP_CONFIG(_name, _reg_base) \
+	{				\
+		.name = _name,		\
+		.reg_bits = 16,		\
+		.val_bits = 32,		\
+		.reg_stride = 4,	\
+		.reg_base = _reg_base,	\
+		.max_register = 0x17c,	\
+	}
+
+static const struct regmap_config mt7531_pcs_config[] = {
+	MT7531_PCS_REGMAP_CONFIG("port5", MT7531_SGMII_REG_BASE(5)),
+	MT7531_PCS_REGMAP_CONFIG("port6", MT7531_SGMII_REG_BASE(6)),
 };
 
 static int
 mt753x_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
+	struct regmap *regmap;
 	int i, ret;
 
 	/* Initialise the PCS devices */
@@ -3088,8 +2931,6 @@  mt753x_setup(struct dsa_switch *ds)
 		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
 		priv->pcs[i].priv = priv;
 		priv->pcs[i].port = i;
-		if (mt753x_is_mac_port(i))
-			priv->pcs[i].pcs.poll = 1;
 	}
 
 	ret = priv->info->sw_setup(ds);
@@ -3104,6 +2945,16 @@  mt753x_setup(struct dsa_switch *ds)
 	if (ret && priv->irq)
 		mt7530_free_irq_common(priv);
 
+	if (priv->id == ID_MT7531)
+		for (i = 0; i < 2; i++) {
+			regmap = devm_regmap_init(ds->dev,
+						  &mt7531_regmap_bus, priv,
+						  &mt7531_pcs_config[i]);
+			priv->ports[5 + i].sgmii_pcs =
+				mtk_pcs_lynxi_create(ds->dev, regmap,
+						     MT7531_PHYA_CTRL_SIGNAL3, 0);
+		}
+
 	return ret;
 }
 
@@ -3199,7 +3050,7 @@  static const struct mt753x_info mt753x_table[] = {
 	},
 	[ID_MT7531] = {
 		.id = ID_MT7531,
-		.pcs_ops = &mt7531_pcs_ops,
+		.pcs_ops = &mt7530_pcs_ops,
 		.sw_setup = mt7531_setup,
 		.phy_read_c22 = mt7531_ind_c22_phy_read,
 		.phy_write_c22 = mt7531_ind_c22_phy_write,
@@ -3309,7 +3160,7 @@  static void
 mt7530_remove(struct mdio_device *mdiodev)
 {
 	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-	int ret = 0;
+	int ret = 0, i;
 
 	if (!priv)
 		return;
@@ -3328,6 +3179,10 @@  mt7530_remove(struct mdio_device *mdiodev)
 		mt7530_free_irq(priv);
 
 	dsa_unregister_switch(priv->ds);
+
+	for (i = 0; i < 2; ++i)
+		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
+
 	mutex_destroy(&priv->reg_mutex);
 }
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 6b2fc6290ea8..c5d29f3fc1d8 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -364,47 +364,8 @@  enum mt7530_vlan_port_acc_frm {
 					 CCR_TX_OCT_CNT_BAD)
 
 /* MT7531 SGMII register group */
-#define MT7531_SGMII_REG_BASE		0x5000
-#define MT7531_SGMII_REG(p, r)		(MT7531_SGMII_REG_BASE + \
-					((p) - 5) * 0x1000 + (r))
-
-/* Register forSGMII PCS_CONTROL_1 */
-#define MT7531_PCS_CONTROL_1(p)		MT7531_SGMII_REG(p, 0x00)
-#define  MT7531_SGMII_LINK_STATUS	BIT(18)
-#define  MT7531_SGMII_AN_ENABLE		BIT(12)
-#define  MT7531_SGMII_AN_RESTART	BIT(9)
-#define  MT7531_SGMII_AN_COMPLETE	BIT(21)
-
-/* Register for SGMII PCS_SPPED_ABILITY */
-#define MT7531_PCS_SPEED_ABILITY(p)	MT7531_SGMII_REG(p, 0x08)
-#define  MT7531_SGMII_TX_CONFIG_MASK	GENMASK(15, 0)
-#define  MT7531_SGMII_TX_CONFIG		BIT(0)
-
-/* Register for SGMII_MODE */
-#define MT7531_SGMII_MODE(p)		MT7531_SGMII_REG(p, 0x20)
-#define  MT7531_SGMII_REMOTE_FAULT_DIS	BIT(8)
-#define  MT7531_SGMII_IF_MODE_MASK	GENMASK(5, 1)
-#define  MT7531_SGMII_FORCE_DUPLEX	BIT(4)
-#define  MT7531_SGMII_FORCE_SPEED_MASK	GENMASK(3, 2)
-#define  MT7531_SGMII_FORCE_SPEED_1000	BIT(3)
-#define  MT7531_SGMII_FORCE_SPEED_100	BIT(2)
-#define  MT7531_SGMII_FORCE_SPEED_10	0
-#define  MT7531_SGMII_SPEED_DUPLEX_AN	BIT(1)
-
-enum mt7531_sgmii_force_duplex {
-	MT7531_SGMII_FORCE_FULL_DUPLEX = 0,
-	MT7531_SGMII_FORCE_HALF_DUPLEX = 0x10,
-};
-
-/* Fields of QPHY_PWR_STATE_CTRL */
-#define MT7531_QPHY_PWR_STATE_CTRL(p)	MT7531_SGMII_REG(p, 0xe8)
-#define  MT7531_SGMII_PHYA_PWD		BIT(4)
-
-/* Values of SGMII SPEED */
-#define MT7531_PHYA_CTRL_SIGNAL3(p)	MT7531_SGMII_REG(p, 0x128)
-#define  MT7531_RG_TPHY_SPEED_MASK	(BIT(2) | BIT(3))
-#define  MT7531_RG_TPHY_SPEED_1_25G	0x0
-#define  MT7531_RG_TPHY_SPEED_3_125G	BIT(2)
+#define MT7531_SGMII_REG_BASE(p)	(0x5000 + ((p) - 5) * 0x1000)
+#define MT7531_PHYA_CTRL_SIGNAL3	0x128
 
 /* Register for system reset */
 #define MT7530_SYS_CTRL			0x7000
@@ -703,13 +664,13 @@  struct mt7530_fdb {
  * @pm:		The matrix used to show all connections with the port.
  * @pvid:	The VLAN specified is to be considered a PVID at ingress.  Any
  *		untagged frames will be assigned to the related VLAN.
- * @vlan_filtering: The flags indicating whether the port that can recognize
- *		    VLAN-tagged frames.
+ * @sgmii_pcs:	Pointer to PCS instance for SerDes ports
  */
 struct mt7530_port {
 	bool enable;
 	u32 pm;
 	u16 pvid;
+	struct phylink_pcs *sgmii_pcs;
 };
 
 /* Port 5 interface select definitions */