[21/24] Documentation: trace: correct spelling
Commit Message
Correct spelling problems for Documentation/trace/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-trace-kernel@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for coresight
---
Documentation/trace/coresight/coresight-etm4x-reference.rst | 2 +-
Documentation/trace/events.rst | 6 +++---
Documentation/trace/fprobe.rst | 2 +-
Documentation/trace/ftrace-uses.rst | 2 +-
Documentation/trace/hwlat_detector.rst | 2 +-
Documentation/trace/uprobetracer.rst | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
Comments
Reviewed by: Mike Leach <mike.leach@linaro.org>
On Thu, 9 Feb 2023 at 07:14, Randy Dunlap <rdunlap@infradead.org> wrote:
>
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for coresight
> ---
> Documentation/trace/coresight/coresight-etm4x-reference.rst | 2 +-
> Documentation/trace/events.rst | 6 +++---
> Documentation/trace/fprobe.rst | 2 +-
> Documentation/trace/ftrace-uses.rst | 2 +-
> Documentation/trace/hwlat_detector.rst | 2 +-
> Documentation/trace/uprobetracer.rst | 2 +-
> 7 files changed, 9 insertions(+), 9 deletions(-)
>
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
> reconstructed using only conditional branches.
>
> There is currently no support in Perf for supplying modified binaries to the decoder, so this
> - feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> + feature is only intended to be used for debugging purposes or with a 3rd party tool.
>
> Choosing this option will result in a significant increase in the amount of trace generated -
> possible danger of overflows, or fewer instructions covered. Note, that this option also
> diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
> --- a/Documentation/trace/events.rst
> +++ b/Documentation/trace/events.rst
> @@ -903,7 +903,7 @@ functions can be used.
>
> To create a kprobe event, an empty or partially empty kprobe event
> should first be created using kprobe_event_gen_cmd_start(). The name
> -of the event and the probe location should be specfied along with one
> +of the event and the probe location should be specified along with one
> or args each representing a probe field should be supplied to this
> function. Before calling kprobe_event_gen_cmd_start(), the user
> should create and initialize a dynevent_cmd object using
> @@ -983,7 +983,7 @@ The basic idea is simple and amounts to
> layer that can be used to generate trace event commands. The
> generated command strings can then be passed to the command-parsing
> and event creation code that already exists in the trace event
> -subystem for creating the corresponding trace events.
> +subsystem for creating the corresponding trace events.
>
> In a nutshell, the way it works is that the higher-level interface
> code creates a struct dynevent_cmd object, then uses a couple
> @@ -1056,7 +1056,7 @@ to add an operator between the pair (her
> appended onto the end of the arg pair (here ';').
>
> There's also a dynevent_str_add() function that can be used to simply
> -add a string as-is, with no spaces, delimeters, or arg check.
> +add a string as-is, with no spaces, delimiters, or arg check.
>
> Any number of dynevent_*_add() calls can be made to build up the string
> (until its length surpasses cmd->maxlen). When all the arguments have
> diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
> --- a/Documentation/trace/fprobe.rst
> +++ b/Documentation/trace/fprobe.rst
> @@ -111,7 +111,7 @@ saved at function entry and passed to ex
> the instruction pointer of @regs may be different from the @entry_ip
> in the entry_handler. If you need traced instruction pointer, you need
> to use @entry_ip. On the other hand, in the exit_handler, the instruction
> - pointer of @regs is set to the currect return address.
> + pointer of @regs is set to the correct return address.
>
> Share the callbacks with kprobes
> ================================
> diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
> --- a/Documentation/trace/ftrace-uses.rst
> +++ b/Documentation/trace/ftrace-uses.rst
> @@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
> Not, if this flag is set, then the callback will always be called
> with preemption disabled. If it is not set, then it is possible
> (but not guaranteed) that the callback will be called in
> - preemptable context.
> + preemptible context.
>
> FTRACE_OPS_FL_IPMODIFY
> Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
> diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
> kernel is highly latency sensitive.
>
> SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
> and are serviced by BIOS code, usually for "critical" events such as
> management of thermal sensors and fans. Sometimes though, SMIs are used for
> other tasks and those tasks can spend an inordinate amount of time in the
> diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
> --- a/Documentation/trace/uprobetracer.rst
> +++ b/Documentation/trace/uprobetracer.rst
> @@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
>
> (\*1) only for return probe.
> (\*2) this is useful for fetching a field of data structures.
> - (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
> + (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
> events can access only user-space memory.
>
> Types
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 2/9/23 08:13, Randy Dunlap wrote:
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
> kernel is highly latency sensitive.
>
> SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
> and are serviced by BIOS code, usually for "critical" events such as
> management of thermal sensors and fans. Sometimes though, SMIs are used for
> other tasks and those tasks can spend an inordinate amount of time in the
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Thanks!
-- Daniel
On Wed, 8 Feb 2023 23:13:57 -0800
Randy Dunlap <rdunlap@infradead.org> wrote:
> Correct spelling problems for Documentation/trace/ as reported
> by codespell.
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
> Cc: linux-trace-kernel@vger.kernel.org
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: coresight@lists.linaro.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for coresight
Looks good to me.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Thanks,
> ---
> Documentation/trace/coresight/coresight-etm4x-reference.rst | 2 +-
> Documentation/trace/events.rst | 6 +++---
> Documentation/trace/fprobe.rst | 2 +-
> Documentation/trace/ftrace-uses.rst | 2 +-
> Documentation/trace/hwlat_detector.rst | 2 +-
> Documentation/trace/uprobetracer.rst | 2 +-
> 7 files changed, 9 insertions(+), 9 deletions(-)
>
> diff -- a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
> +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
> @@ -675,7 +675,7 @@ Bit assignments shown below:-
> reconstructed using only conditional branches.
>
> There is currently no support in Perf for supplying modified binaries to the decoder, so this
> - feature is only inteded to be used for debugging purposes or with a 3rd party tool.
> + feature is only intended to be used for debugging purposes or with a 3rd party tool.
>
> Choosing this option will result in a significant increase in the amount of trace generated -
> possible danger of overflows, or fewer instructions covered. Note, that this option also
> diff -- a/Documentation/trace/events.rst b/Documentation/trace/events.rst
> --- a/Documentation/trace/events.rst
> +++ b/Documentation/trace/events.rst
> @@ -903,7 +903,7 @@ functions can be used.
>
> To create a kprobe event, an empty or partially empty kprobe event
> should first be created using kprobe_event_gen_cmd_start(). The name
> -of the event and the probe location should be specfied along with one
> +of the event and the probe location should be specified along with one
> or args each representing a probe field should be supplied to this
> function. Before calling kprobe_event_gen_cmd_start(), the user
> should create and initialize a dynevent_cmd object using
> @@ -983,7 +983,7 @@ The basic idea is simple and amounts to
> layer that can be used to generate trace event commands. The
> generated command strings can then be passed to the command-parsing
> and event creation code that already exists in the trace event
> -subystem for creating the corresponding trace events.
> +subsystem for creating the corresponding trace events.
>
> In a nutshell, the way it works is that the higher-level interface
> code creates a struct dynevent_cmd object, then uses a couple
> @@ -1056,7 +1056,7 @@ to add an operator between the pair (her
> appended onto the end of the arg pair (here ';').
>
> There's also a dynevent_str_add() function that can be used to simply
> -add a string as-is, with no spaces, delimeters, or arg check.
> +add a string as-is, with no spaces, delimiters, or arg check.
>
> Any number of dynevent_*_add() calls can be made to build up the string
> (until its length surpasses cmd->maxlen). When all the arguments have
> diff -- a/Documentation/trace/fprobe.rst b/Documentation/trace/fprobe.rst
> --- a/Documentation/trace/fprobe.rst
> +++ b/Documentation/trace/fprobe.rst
> @@ -111,7 +111,7 @@ saved at function entry and passed to ex
> the instruction pointer of @regs may be different from the @entry_ip
> in the entry_handler. If you need traced instruction pointer, you need
> to use @entry_ip. On the other hand, in the exit_handler, the instruction
> - pointer of @regs is set to the currect return address.
> + pointer of @regs is set to the correct return address.
>
> Share the callbacks with kprobes
> ================================
> diff -- a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
> --- a/Documentation/trace/ftrace-uses.rst
> +++ b/Documentation/trace/ftrace-uses.rst
> @@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
> Not, if this flag is set, then the callback will always be called
> with preemption disabled. If it is not set, then it is possible
> (but not guaranteed) that the callback will be called in
> - preemptable context.
> + preemptible context.
>
> FTRACE_OPS_FL_IPMODIFY
> Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
> diff -- a/Documentation/trace/hwlat_detector.rst b/Documentation/trace/hwlat_detector.rst
> --- a/Documentation/trace/hwlat_detector.rst
> +++ b/Documentation/trace/hwlat_detector.rst
> @@ -14,7 +14,7 @@ originally written for use by the "RT" p
> kernel is highly latency sensitive.
>
> SMIs are not serviced by the Linux kernel, which means that it does not
> -even know that they are occuring. SMIs are instead set up by BIOS code
> +even know that they are occurring. SMIs are instead set up by BIOS code
> and are serviced by BIOS code, usually for "critical" events such as
> management of thermal sensors and fans. Sometimes though, SMIs are used for
> other tasks and those tasks can spend an inordinate amount of time in the
> diff -- a/Documentation/trace/uprobetracer.rst b/Documentation/trace/uprobetracer.rst
> --- a/Documentation/trace/uprobetracer.rst
> +++ b/Documentation/trace/uprobetracer.rst
> @@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
>
> (\*1) only for return probe.
> (\*2) this is useful for fetching a field of data structures.
> - (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
> + (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
> events can access only user-space memory.
>
> Types
On Thu, 9 Feb 2023 23:41:13 +0900
Masami Hiramatsu (Google) <mhiramat@kernel.org> wrote:
> Looks good to me.
>
> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-- Steve
@@ -675,7 +675,7 @@ Bit assignments shown below:-
reconstructed using only conditional branches.
There is currently no support in Perf for supplying modified binaries to the decoder, so this
- feature is only inteded to be used for debugging purposes or with a 3rd party tool.
+ feature is only intended to be used for debugging purposes or with a 3rd party tool.
Choosing this option will result in a significant increase in the amount of trace generated -
possible danger of overflows, or fewer instructions covered. Note, that this option also
@@ -903,7 +903,7 @@ functions can be used.
To create a kprobe event, an empty or partially empty kprobe event
should first be created using kprobe_event_gen_cmd_start(). The name
-of the event and the probe location should be specfied along with one
+of the event and the probe location should be specified along with one
or args each representing a probe field should be supplied to this
function. Before calling kprobe_event_gen_cmd_start(), the user
should create and initialize a dynevent_cmd object using
@@ -983,7 +983,7 @@ The basic idea is simple and amounts to
layer that can be used to generate trace event commands. The
generated command strings can then be passed to the command-parsing
and event creation code that already exists in the trace event
-subystem for creating the corresponding trace events.
+subsystem for creating the corresponding trace events.
In a nutshell, the way it works is that the higher-level interface
code creates a struct dynevent_cmd object, then uses a couple
@@ -1056,7 +1056,7 @@ to add an operator between the pair (her
appended onto the end of the arg pair (here ';').
There's also a dynevent_str_add() function that can be used to simply
-add a string as-is, with no spaces, delimeters, or arg check.
+add a string as-is, with no spaces, delimiters, or arg check.
Any number of dynevent_*_add() calls can be made to build up the string
(until its length surpasses cmd->maxlen). When all the arguments have
@@ -111,7 +111,7 @@ saved at function entry and passed to ex
the instruction pointer of @regs may be different from the @entry_ip
in the entry_handler. If you need traced instruction pointer, you need
to use @entry_ip. On the other hand, in the exit_handler, the instruction
- pointer of @regs is set to the currect return address.
+ pointer of @regs is set to the correct return address.
Share the callbacks with kprobes
================================
@@ -193,7 +193,7 @@ FTRACE_OPS_FL_RECURSION
Not, if this flag is set, then the callback will always be called
with preemption disabled. If it is not set, then it is possible
(but not guaranteed) that the callback will be called in
- preemptable context.
+ preemptible context.
FTRACE_OPS_FL_IPMODIFY
Requires FTRACE_OPS_FL_SAVE_REGS set. If the callback is to "hijack"
@@ -14,7 +14,7 @@ originally written for use by the "RT" p
kernel is highly latency sensitive.
SMIs are not serviced by the Linux kernel, which means that it does not
-even know that they are occuring. SMIs are instead set up by BIOS code
+even know that they are occurring. SMIs are instead set up by BIOS code
and are serviced by BIOS code, usually for "critical" events such as
management of thermal sensors and fans. Sometimes though, SMIs are used for
other tasks and those tasks can spend an inordinate amount of time in the
@@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
(\*1) only for return probe.
(\*2) this is useful for fetching a field of data structures.
- (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
+ (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
events can access only user-space memory.
Types