[v2,04/11] soc: qcom: pmic_glink: register ucsi aux device
Commit Message
Only register UCSI on know working devices, like on the SM8450
or Sm8550 which requires UCSI to get USB mode switch events.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/soc/qcom/pmic_glink.c | 67 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 57 insertions(+), 10 deletions(-)
Comments
On 10/02/2023 17:02, Neil Armstrong wrote:
> Only register UCSI on know working devices, like on the SM8450
> or Sm8550 which requires UCSI to get USB mode switch events.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> drivers/soc/qcom/pmic_glink.c | 67 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 57 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
> index bb3fb57abcc6..c7f091f4a8c1 100644
> --- a/drivers/soc/qcom/pmic_glink.c
> +++ b/drivers/soc/qcom/pmic_glink.c
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Ltd
> */
> #include <linux/auxiliary_bus.h>
> +#include <linux/of_device.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> @@ -11,12 +12,23 @@
> #include <linux/soc/qcom/pdr.h>
> #include <linux/soc/qcom/pmic_glink.h>
>
> +enum {
> + PMIC_GLINK_CLIENT_BATT = 0,
> + PMIC_GLINK_CLIENT_ALTMODE,
> + PMIC_GLINK_CLIENT_UCSI,
> +};
> +
> +#define PMIC_GLINK_CLIENT_DEFAULT (BIT(PMIC_GLINK_CLIENT_BATT) | \
> + BIT(PMIC_GLINK_CLIENT_ALTMODE))
> +
> struct pmic_glink {
> struct device *dev;
> struct pdr_handle *pdr;
>
> struct rpmsg_endpoint *ept;
>
> + unsigned int client_mask;
> +
> struct auxiliary_device altmode_aux;
> struct auxiliary_device ps_aux;
> struct auxiliary_device ucsi_aux;
> @@ -231,8 +243,19 @@ static struct rpmsg_driver pmic_glink_rpmsg_driver = {
> },
> };
>
> +/* Do not handle altmode for now on those platforms */
> +static const unsigned int pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
> + BIT(PMIC_GLINK_CLIENT_UCSI);
> +
> +static const struct of_device_id pmic_glink_of_client_mask[] = {
> + { .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + { .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + {}
> +};
> +
Squash this into pmic_glink_of_match, please. Then you can use
of_device_get_match_data()
> static int pmic_glink_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *match;
> struct pdr_service *service;
> struct pmic_glink *pg;
> int ret;
> @@ -249,12 +272,27 @@ static int pmic_glink_probe(struct platform_device *pdev)
> mutex_init(&pg->client_lock);
> mutex_init(&pg->state_lock);
>
> - ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> - if (ret)
> - return ret;
> - ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> - if (ret)
> - goto out_release_altmode_aux;
> + match = of_match_device(pmic_glink_of_client_mask, &pdev->dev);
> + if (match)
> + pg->client_mask = *(const unsigned int *)match->data;
> + else
> + pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
> +
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
> + if (ret)
> + return ret;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> + if (ret)
> + goto out_release_ucsi_aux;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> + if (ret)
> + goto out_release_altmode_aux;
> + }
>
> pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
> if (IS_ERR(pg->pdr)) {
> @@ -278,9 +316,14 @@ static int pmic_glink_probe(struct platform_device *pdev)
> out_release_pdr_handle:
> pdr_handle_release(pg->pdr);
> out_release_aux_devices:
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> out_release_altmode_aux:
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> +out_release_ucsi_aux:
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> return ret;
> }
> @@ -291,8 +334,12 @@ static int pmic_glink_remove(struct platform_device *pdev)
>
> pdr_handle_release(pg->pdr);
>
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> mutex_lock(&__pmic_glink_lock);
> __pmic_glink = NULL;
>
On Fri, Feb 10, 2023 at 04:02:07PM +0100, Neil Armstrong wrote:
> Only register UCSI on know working devices, like on the SM8450
> or Sm8550 which requires UCSI to get USB mode switch events.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> drivers/soc/qcom/pmic_glink.c | 67 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 57 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
> index bb3fb57abcc6..c7f091f4a8c1 100644
> --- a/drivers/soc/qcom/pmic_glink.c
> +++ b/drivers/soc/qcom/pmic_glink.c
> @@ -4,6 +4,7 @@
> * Copyright (c) 2022, Linaro Ltd
> */
> #include <linux/auxiliary_bus.h>
> +#include <linux/of_device.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> @@ -11,12 +12,23 @@
> #include <linux/soc/qcom/pdr.h>
> #include <linux/soc/qcom/pmic_glink.h>
>
> +enum {
> + PMIC_GLINK_CLIENT_BATT = 0,
> + PMIC_GLINK_CLIENT_ALTMODE,
> + PMIC_GLINK_CLIENT_UCSI,
> +};
> +
> +#define PMIC_GLINK_CLIENT_DEFAULT (BIT(PMIC_GLINK_CLIENT_BATT) | \
> + BIT(PMIC_GLINK_CLIENT_ALTMODE))
> +
> struct pmic_glink {
> struct device *dev;
> struct pdr_handle *pdr;
>
> struct rpmsg_endpoint *ept;
>
> + unsigned int client_mask;
> +
> struct auxiliary_device altmode_aux;
> struct auxiliary_device ps_aux;
> struct auxiliary_device ucsi_aux;
> @@ -231,8 +243,19 @@ static struct rpmsg_driver pmic_glink_rpmsg_driver = {
> },
> };
>
> +/* Do not handle altmode for now on those platforms */
> +static const unsigned int pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
> + BIT(PMIC_GLINK_CLIENT_UCSI);
> +
> +static const struct of_device_id pmic_glink_of_client_mask[] = {
> + { .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + { .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
> + {}
> +};
> +
> static int pmic_glink_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *match;
> struct pdr_service *service;
> struct pmic_glink *pg;
> int ret;
> @@ -249,12 +272,27 @@ static int pmic_glink_probe(struct platform_device *pdev)
> mutex_init(&pg->client_lock);
> mutex_init(&pg->state_lock);
>
> - ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> - if (ret)
> - return ret;
> - ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> - if (ret)
> - goto out_release_altmode_aux;
> + match = of_match_device(pmic_glink_of_client_mask, &pdev->dev);
> + if (match)
> + pg->client_mask = *(const unsigned int *)match->data;
Make pmic_glink_sm8450_client_mask unsigned long instead, then it will
have the same size as void * and you don't need to dereference it
here...
> + else
> + pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
Let's move these bits to pmic_glink_of_match[] to avoid having two
different of_device_id to keep in sync.
And hopefully we could have "qcom,pmic_glink" represent the case of
having all 3 bits set soon, and special case what you have as
"default" here...
Regards,
Bjorn
> +
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
> + if (ret)
> + return ret;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
> + if (ret)
> + goto out_release_ucsi_aux;
> + }
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT)) {
> + ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
> + if (ret)
> + goto out_release_altmode_aux;
> + }
>
> pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
> if (IS_ERR(pg->pdr)) {
> @@ -278,9 +316,14 @@ static int pmic_glink_probe(struct platform_device *pdev)
> out_release_pdr_handle:
> pdr_handle_release(pg->pdr);
> out_release_aux_devices:
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> out_release_altmode_aux:
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> +out_release_ucsi_aux:
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> return ret;
> }
> @@ -291,8 +334,12 @@ static int pmic_glink_remove(struct platform_device *pdev)
>
> pdr_handle_release(pg->pdr);
>
> - pmic_glink_del_aux_device(pg, &pg->ps_aux);
> - pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
> + pmic_glink_del_aux_device(pg, &pg->ps_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
> + pmic_glink_del_aux_device(pg, &pg->altmode_aux);
> + if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
> + pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
>
> mutex_lock(&__pmic_glink_lock);
> __pmic_glink = NULL;
>
> --
> 2.34.1
>
@@ -4,6 +4,7 @@
* Copyright (c) 2022, Linaro Ltd
*/
#include <linux/auxiliary_bus.h>
+#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rpmsg.h>
@@ -11,12 +12,23 @@
#include <linux/soc/qcom/pdr.h>
#include <linux/soc/qcom/pmic_glink.h>
+enum {
+ PMIC_GLINK_CLIENT_BATT = 0,
+ PMIC_GLINK_CLIENT_ALTMODE,
+ PMIC_GLINK_CLIENT_UCSI,
+};
+
+#define PMIC_GLINK_CLIENT_DEFAULT (BIT(PMIC_GLINK_CLIENT_BATT) | \
+ BIT(PMIC_GLINK_CLIENT_ALTMODE))
+
struct pmic_glink {
struct device *dev;
struct pdr_handle *pdr;
struct rpmsg_endpoint *ept;
+ unsigned int client_mask;
+
struct auxiliary_device altmode_aux;
struct auxiliary_device ps_aux;
struct auxiliary_device ucsi_aux;
@@ -231,8 +243,19 @@ static struct rpmsg_driver pmic_glink_rpmsg_driver = {
},
};
+/* Do not handle altmode for now on those platforms */
+static const unsigned int pmic_glink_sm8450_client_mask = BIT(PMIC_GLINK_CLIENT_BATT) |
+ BIT(PMIC_GLINK_CLIENT_UCSI);
+
+static const struct of_device_id pmic_glink_of_client_mask[] = {
+ { .compatible = "qcom,sm8450-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
+ { .compatible = "qcom,sm8550-pmic-glink", .data = &pmic_glink_sm8450_client_mask },
+ {}
+};
+
static int pmic_glink_probe(struct platform_device *pdev)
{
+ const struct of_device_id *match;
struct pdr_service *service;
struct pmic_glink *pg;
int ret;
@@ -249,12 +272,27 @@ static int pmic_glink_probe(struct platform_device *pdev)
mutex_init(&pg->client_lock);
mutex_init(&pg->state_lock);
- ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
- if (ret)
- return ret;
- ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
- if (ret)
- goto out_release_altmode_aux;
+ match = of_match_device(pmic_glink_of_client_mask, &pdev->dev);
+ if (match)
+ pg->client_mask = *(const unsigned int *)match->data;
+ else
+ pg->client_mask = PMIC_GLINK_CLIENT_DEFAULT;
+
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI)) {
+ ret = pmic_glink_add_aux_device(pg, &pg->ucsi_aux, "ucsi");
+ if (ret)
+ return ret;
+ }
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE)) {
+ ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
+ if (ret)
+ goto out_release_ucsi_aux;
+ }
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT)) {
+ ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
+ if (ret)
+ goto out_release_altmode_aux;
+ }
pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
if (IS_ERR(pg->pdr)) {
@@ -278,9 +316,14 @@ static int pmic_glink_probe(struct platform_device *pdev)
out_release_pdr_handle:
pdr_handle_release(pg->pdr);
out_release_aux_devices:
- pmic_glink_del_aux_device(pg, &pg->ps_aux);
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
+ pmic_glink_del_aux_device(pg, &pg->ps_aux);
out_release_altmode_aux:
- pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
+ pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+out_release_ucsi_aux:
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
+ pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
return ret;
}
@@ -291,8 +334,12 @@ static int pmic_glink_remove(struct platform_device *pdev)
pdr_handle_release(pg->pdr);
- pmic_glink_del_aux_device(pg, &pg->ps_aux);
- pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_BATT))
+ pmic_glink_del_aux_device(pg, &pg->ps_aux);
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_ALTMODE))
+ pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+ if (pg->client_mask & BIT(PMIC_GLINK_CLIENT_UCSI))
+ pmic_glink_del_aux_device(pg, &pg->ucsi_aux);
mutex_lock(&__pmic_glink_lock);
__pmic_glink = NULL;