diff mbox series

[1/2] ASoC: dt-bindings: maxim,max98090: Convert to dtschema

Message ID 20230208160410.371609-1-krzysztof.kozlowski@linaro.org
State New
Headers
Series [1/2] ASoC: dt-bindings: maxim,max98090: Convert to dtschema |

Commit Message

Krzysztof Kozlowski Feb. 8, 2023, 4:04 p.m. UTC 
  Convert the Maxim Integrated MAX98090/MAX98091 audio codecs bindings to
DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/sound/max98090.txt    | 59 -------------
 .../bindings/sound/maxim,max98090.yaml        | 84 +++++++++++++++++++
 2 files changed, 84 insertions(+), 59 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/max98090.txt
 create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98090.yaml

Comments

Mark Brown Feb. 9, 2023, 4:06 p.m. UTC | #1 
On Wed, 08 Feb 2023 17:04:09 +0100, Krzysztof Kozlowski wrote:
> Convert the Maxim Integrated MAX98090/MAX98091 audio codecs bindings to
> DT schema.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: dt-bindings: maxim,max98090: Convert to dtschema
      commit: 0551ff7cf51abefe7351a8c486e6318196b3b6fe
[2/2] ASoC: codecs: max98090: simplify snd_soc_dai_driver
      commit: 35ff1051b9594b05041eb2444a339345944b3241

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
deleted file mode 100644
index 39d640294c62..000000000000
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ /dev/null
@@ -1,59 +0,0 @@ 
-MAX98090 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "maxim,max98090" or "maxim,max98091".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-Optional properties:
-
-- clocks: The phandle of the master clock to the CODEC
-
-- clock-names: Should be "mclk"
-
-- #sound-dai-cells : should be 0.
-
-- maxim,dmic-freq: Frequency at which to clock DMIC
-
-- maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are:
-	0 - 2.2v
-	1 - 2.55v
-	2 - 2.4v
-	3 - 2.8v
-
-Pins on the device (for linking into audio routes):
-
-  * MIC1
-  * MIC2
-  * DMICL
-  * DMICR
-  * IN1
-  * IN2
-  * IN3
-  * IN4
-  * IN5
-  * IN6
-  * IN12
-  * IN34
-  * IN56
-  * HPL
-  * HPR
-  * SPKL
-  * SPKR
-  * RCVL
-  * RCVR
-  * MICBIAS
-
-Example:
-
-audio-codec@10 {
-	compatible = "maxim,max98090";
-	reg = <0x10>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml
new file mode 100644
index 000000000000..65e4c516912f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml
@@ -0,0 +1,84 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98090/MAX98091 audio codecs
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Pins on the device (for linking into audio routes):
+  MIC1, MIC2, DMICL, DMICR, IN1, IN2, IN3, IN4, IN5, IN6, IN12, IN34, IN56,
+  HPL, HPR, SPKL, SPKR, RCVL, RCVR, MICBIAS
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98090
+      - maxim,max98091
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  maxim,dmic-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2500000
+    description:
+      DMIC clock frequency
+
+  maxim,micbias:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 3
+    description: |
+      Micbias voltage applied to the analog mic, valid voltages value are:
+        0 - 2.2v
+        1 - 2.55v
+        2 - 2.4v
+        3 - 2.8v
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@10 {
+            compatible = "maxim,max98090";
+            reg = <0x10>;
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&i2s0 0>;
+            clock-names = "mclk";
+            #sound-dai-cells = <0>;
+        };
+    };